All manuals and user guides at all-guides.com q~ÄäÉ=çÑ=`çåíÉåí Safety and warning information ......Adjusting the appliance in the niche .......... 15 Installation possibilities ........Fastening the appliance Stand alone appliance ..........to the niche ceiling ......1 5 Side-by-Side set up .......
All manuals and user guides at all-guides.com Safety and warning information These mounting instructions are designed to help yo ã Caution install your new appliance. Setting up and mounting this appliance requires The manufacturer cannot be he ld liable for mounting extensive expertise in various trades (mechanics, which has been improperly carried out.
All manuals and user guides at all-guides.com Installation Possibilities Various installation possibilities are available. Stand alone applianc e with dividing These are only limited by the kitchen design and th wall finger protector function. Stand alone appliance Side-by-Side set up ...
All manuals and user guides at all-guides.com Installing the appliance Installation location Stable installation The appliance is very heavy and has a tendency to t ã Caution: forwards when the appliance door is opened. The appliance is very heav y. Data relating to the The appliance must not be switched on until there is no possibility of the appliance tilting over.
Subsurface Electrica All manuals and user guides at all-guides.com ã Caution: The sock ly A fully laden ap accessib the weight whe The app table. Connect current v Appliance conducto A fuse. Refrigerator 60. For appl non- Refrigerator 75. check w match t ins s Freezer 45.1 cm...
All manuals and user guides at all-guides.com Dimensions of the installation niche 457 mm 229 mm 610 mm 305 mm 762 mm 381 mm Important: The upper niche wall must consist of a rigid, load bearing material (minimum thickness 16 mm). Important: The lateral niche walls must be completely even and free from...
All manuals and user guides at all-guides.com Tools and accessories which are needed Scope of delivery Tools Installation manual Operating instructions Rechargeable screwdriver Installation accessories Additional accessories T20 Torx-bit magnetic Installation accessories for side-by-side installation holder For permanent connectio n of two appliances, e.g.
All manuals and user guides at all-guides.com Installation manual The following mounting instru ctions describe mounting Removing the packaging steps for various appliance models. ã Warning: Therefore, deviations may occur from that shown in diagrams. The appliance could tip over when unpacking. ...
All manuals and user guides at all-guides.com Transporting the appliance Installation preparation Unpack installation materials and accessories. ã Warning: To simplify installation, the packages are identifi ed with The appliance is very heavy. Handle it carefully, labels A, B and C corre sponding with the manual as otherwise people helping to lift it could be hur sections.
Attaching th to the wall All manuals and user guides at all-guides.com ã Warning: Ensure that in t electrical wires damaged by pip ã Warning: When installing always use pro protective equip risk of injury! Note: Each appliance requires 2 an The set supplie various subsurf corresponding t...
All manuals and user guides at all-guides.com Attaching alternative anti-tilt Attaching the edge protectors device To protect the edges of the installation cavity, it recommended to attach edge protection made of Important note: a suitable material. If the anti-tilt brackets ca nnot be securely attached, Attach the edge protection wi th the adhesive tape which a wooden beam can be used above the appliance as was used to attach the acce...
All manuals and user guides at all-guides.com Sliding the appliance into the installation niche Protect the mains lead from getting wedged under ã Caution: or behind the appliance. Be careful when sliding the appliance into the Recommended procedure: installation niche. Do not damage the water connection or power cord.
All manuals and user guides at all-guides.com Unscrew the height-adjustable feet at the front o Adjusting the appliance in the the appliance until the mark on the base has niche reached the indicated height (32 mm). Note: To ensure that the appliance functions correctly, it must be set level with a spirit level.
All manuals and user guides at all-guides.com If there enough room on the top of the appliance f Fastening the appliance to the side the the lateral bars of the fastening sheets (above) wall of the installation niche to the side of the niche. Screw on the bars of the fastening sheets (lateral) with the cabinet parts lo cated next to them.
Page 17
on the hinge Push the cu These gap between th Instruc All manuals and user guides at all-guides.com section The part must b Water the ap Ensure smo door (...
All manuals and user guides at all-guides.com Fastening the plinth strip Aligning the base cover Place base cover on the appliance (do not screw Note: on). Never cover the ventilation cracks in the base pane lling. Measure the difference in depth A between the Risk of damage to the appliance.
All manuals and user guides at all-guides.com Switching the appliance on for the Loading the appliance door first time When attaching the furniture doors it is recommende to load the storage sections in the door with weigh ts in The appliance should now be switched on for the fir order to ensure that the when adjusting crack time in order to ensure the accuracy of the followi dimensions turn out to be as precise as possible.
All manuals and user guides at all-guides.com Note: Fastening the adjusting rib to the furniture door One screw should be screwed in under the threaded rod in each case. Measure distance A between the adjusting rail and The adjusting rib has a various holes for different the furniture parts above.
All manuals and user guides at all-guides.com On both lengths of the furniture door, draw Mounting the furniture door a parallel with the help of the positioning aid. Note: Now attach the door handles which should have been screwed from behind! Remove fixing bracket (a) from the appliance door To do this, loosen the fastening screws (b) only.
e adjusting r Hang furnitu 10. Scre ng threaded rods ( 1. ). rail and All manuals and user guides at all-guides.com the doo Lower furnit down over the f door ( 2. ). 10. Scr The late th lower fas The num ening the width...
All manuals and user guides at all-guides.com Attach the finger protector with the screws on th Fasten the finger protector fixing brackets. When positioning the finger protector at the door ensure that the fixing holes in the cover strip correspond with the boreholes in the fixing brackets.
All manuals and user guides at all-guides.com Only in the case of individual appliances: Tensioning the hinge springs Screw on the angle (a) for fastening the cover ri Turn the setting screw with a cross head screwdrive I = Spring tensioned 0 = Spring released Attach the cover ribs (c) to the fastening sheets (b) and the angles (a).
All manuals and user guides at all-guides.com Special installation steps Unscrew the door. Changing over the door hinges ã Warning: Before carrying out any work to the door hinges, release the spring pressure – risk of injury! Note: The door stop cannot be exchanged in the case of freezers with ice and water dispensers.
Page 26
All manuals and user guides at all-guides.com Re-attach ventilation gril le for the changed door Swap the hinge angle to the other side. hinges. Attach ventilation grille. A replacement part for the ve ntilation grille is enclosed with the appliance for adjustment to the changed do hinges.
10. Attach the h e appliance. Removin g the hinges crosswis All manuals and user guides at all-guides.com Freezers ing m side-by-s If a singl alled required 11. Screw the d The sea lla If the do to th door, the opposite 12.
All manuals and user guides at all-guides.com Unscrewing the base panelling. Side-by-Side set up If a side-by-side set up of two appliances is envisa ged, connect the two appliances to one another now. Unpack the installation accessories for side-by-s installation and check that none of the accessories is missing.
Page 29
All manuals and user guides at all-guides.com Screw the connection clamps from the installation Push the appliances to gether until the angle accessories for side-by-side installation to the si brackets interlock. of both appliances. Note th e position of the clamps! Insert pins through the angle brackets.
All manuals and user guides at all-guides.com 12. Press appliances completely together by gripping Preparing the water connection the installation aids with water pump pliers. (only for appliances which require a water connection) 13. When the appliances have been pushed completely together, push the bar from above Note: through the connection clamps.
All manuals and user guides at all-guides.com For furniture doors with a 19 mm thickness: Slide the covering frame onto the ice and water Turn the shut-off valve and the main water tap. dispenser and press in until the frame is flush wit Re-examine the point of connection at the shut-off the door surface.
Loosen the 1. ). Attachin Place a slit All manuals and user guides at all-guides.com (only for shift the blocks dispenser has a In ce if the door ( 2. ). narrow, shorten Retighten th 3. ). side, lay Slid e into the glass pa Apply the co...
All manuals and user guides at all-guides.com Cut the covering strips of the shortest sides to the Setting the door opening angle required length. According to the set up cond itions, it may be necessary to limit the door opening a ngle. A door opening angle of 115°...
Page 34
All manuals and user guides at all-guides.com Siemens-Electrogeräte GmbH Carl-Wery-Str. 34 81739 München Germany *9000650374* 9000650374 (9107)