Quick Links

GT-Y3400 Installation Guide and User Manual
GT-Y3400
Installation Guide
and User Manual
07.Feb, 2011
SAMSUNG ELECTRONICS.LTD.
SAMSUNG Proprietary-Contents may change without notice
| Samsung Electronics
This Document can not be used without Samsung's authorization
Table of Contents
loading

Summary of Contents for Samsung GT-Y3400

  • Page 1 GT-Y3400 Installation Guide and User Manual GT-Y3400 Installation Guide and User Manual 07.Feb, 2011 SAMSUNG ELECTRONICS.LTD. SAMSUNG Proprietary-Contents may change without notice | Samsung Electronics This Document can not be used without Samsung's authorization...
  • Page 2: Table Of Contents

    2.1 Specifications 2.1.1 Mechanical dimensions 2.1.2 Mini PCI Express interface 2.1.3 Antenna connectors 2.1.4 Connector location 2.1.5 Conducted RF measurement 2.1.6 RFx information SAMSUNG Proprietary-Contents may change without notice | Samsung Electronics This Document can not be used without Samsung's authorization...
  • Page 3: Introduction

    Y3400 module product. 1.1.1 Product description The GT-Y3400 module described in this manual are PCI Express Mini Cards support WWAN (UMTS/HSPA+/HSUPA & GSM/GRPS/EDGE) connectivity to SAMSUNG notebooks. The module is manufactured and installed by SAMSUNG. It includes diversity receiver and equalization.
  • Page 4: Key Features And Specifications

    Modem -ICERA ICE8060T Memory -MCP 1Gb/512Mb (Nand/SDRAM) -ICERA ICE8260B Mini PCI Express Card for Samsung Mini PC. (Half Type) General GSM/GPRS/EDGE/UMTS/HSPA+ & HSUPA Support. Features Main Power is 3.3V and Rated Power Consumption is 900mA. UART, USB2.0 and Nexus IF Support (ICERA IF) - High data rate (HSUPA 5.76Mbps, HSPA+ 21Mbps)
  • Page 5: Mechanical Specifications

    Figure 3.Mechanical dimensions of the GT-Y3400 module 2.1.2 Mini PCI Express interface The card edge connector of the GT-Y3400 module complies with the PCI Express Mini Card specification and mates with a 52 pin Mini PCI Express connector. This specification defines an implementation for small form factor PCI Express cards. The specification uses a qualified sub-set of the same signal protocol, electrical definitions, and configuration definitions as the PCI Express Base Specification, Revision 1.1.
  • Page 6 Communications media interfaces may be provided via separate I/O connectors and RF connectors each with independent cables as illustrated in Figure 5. SAMSUNG Proprietary-Contents may change without notice | Samsung Electronics This Document can not be used without Samsung's authorization...
  • Page 7: Antenna Connectors

    GT-Y3400 Installation Guide and User Manual Figure 5. PCI Express Mini Card Add-in Card Installed in a Mobile Platform 2.1.3 Antenna connectors The SMD connectors used for the antenna connections on the GT-Y3400 module are delivered Hirose Ltd. SAMSUNG Proprietary-Contents may change without notice...
  • Page 8: Connector Location

    Figure 7. Detail of mated height 2.1.4 Connector location The GT-Y3400 module supports receiver diversity. Both require a secondary antenna connection. The antenna connectors can be identified by the letters “M” for the main antenna and “D” for the Diversity, printed on the PCB.
  • Page 9: Conducted Rf Measurement

    GT-Y3400 Installation Guide and User Manual Figure 8. placement of the antenna connectors for the GT-Y3400 2.1.5 Conducted RF measurement HSUPA / HSPA+ / UMTS . Multi-bands variants / 850 / 900 / 1900 / 2100 MHz . UMTS Power Class 3 (24 dBm) .
  • Page 10 $QWHQQDB6SHF 2. Frequency Band Service *60 80 *60 1900 WCDMA 2.1G Band Tx ( MH z) 824 ~ 849 1850 ~ 1910 1920 ~ 1980 Rx ( MHz ) 869 ~ 894 1930 ~ 1990 2110 ~ 2170 2.2 Impedance 2.2.1 Normal Value 50Ÿ...
  • Page 11 Gain(dBi) 2.4.1 Measuring Method The connection is done according to 2.3.2. Radiation patterns are measured at 3 different Plane The antenna measured according to the figure 1 below. Confidential Proprietary 5/16...
  • Page 12 2-4-2. Radiation Pattern Figure 2 (a) Confidential Proprietary 6/16...
  • Page 13 IC: 649E-GTY3400X Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

Table of Contents