Quick Links
1. Dismantle the luminaire by sliding the
mounting part as shown in the picture.
3. Connect the cable to the respective
connector as shown in the picture.
4. Refer to the installation manual to
complete the electrical connections and
push carefully the electronics back until
the side plastic reaches its original position.
Page 1 from 2
Honeywell Life Safety AS, Postboks 236, 1372 Asker
290087.1
298100.8
LUMINAIRE PREPARATION
3
Recessed Accessory for ExiLED
2. Cut the plastic for cable entry.
5. Install the indications plastic and connect
the cable to the respective connector as
shown in the picture.
6. Follow the next steps (page 2) to
complete the installation.
http://www.hls-nordic.com
2
5
290087.1-01
Related Manuals for Honeywell 290087.1
Summary of Contents for Honeywell 290087.1
- Page 1 6. Follow the next steps (page 2) to push carefully the electronics back until complete the installation. the side plastic reaches its original position. Page 1 from 2 290087.1-01 Honeywell Life Safety AS, Postboks 236, 1372 Asker http://www.hls-nordic.com...
- Page 2 9. Push upwards the base. Make sure that the retaining tags are not expanded. Page 2 from 2 290087.1-01 Honeywell Life Safety AS, Postboks 236, 1372 Asker http://www.hls-nordic.com...