Quick Links
AFN Atlantic SATNET on Galaxy 16
AFN7500HD Decoder Settings and Channel Guide
NOTE: The settings in this guide are applicable starting at 1200 EDT / 1600 GMT, 3 Nov 2021. Do
not change the settings before that time as there is NO dual illumination period on the satellite.
This guide contains the Cisco 9865 decoder settings changes for the Atlantic Satellite Network (SATNET)
service and the new AFN Channel Guide. If you use a satellite dish that is three meters in diameter,
receive the eight-channel SATNET programming service and live within the area identified in the map
below, you need these decoder settings to get the AFN HD service. Refer to page two for the decoder
settings for AFN customers in the area below.
Important information about this satellite feed
Satellite Name: Galaxy 16
Satellite Orbital Location: 99° West
Transponder: NAC
Band: C-band
Satellite Dish Low Noise Blocker (LNB) Technical Specifications
a. Right-hand circular feedhorn
b. 20° Kelvin Low Noise Blocker
Current as of 20211104
1
Related Manuals for Cisco 9865
Summary of Contents for Cisco 9865
- Page 1 NO dual illumination period on the satellite. This guide contains the Cisco 9865 decoder settings changes for the Atlantic Satellite Network (SATNET) service and the new AFN Channel Guide. If you use a satellite dish that is three meters in diameter, receive the eight-channel SATNET programming service and live within the area identified in the map below, you need these decoder settings to get the AFN HD service.
- Page 2 AFN Atlantic SATNET on Galaxy 16 AFN7500HD Decoder Settings and Channel Guide To set up your decoder you must access the decoder settings “Satellite Setup” menu. Using the circular navigation wheel on your AFN7500HD remote control, access the “Main Menu” and scroll to the “Settings”...
- Page 3 AFN Atlantic SATNET on Galaxy 16 AFN7500HD Decoder Settings and Channel Guide The “Select Satellite” screen (below) gives you the option to load a pre-set satellite configuration for your area or enter the decoder settings manually. We’ll cover the automatic settings first. The gray bar, displayed below, highlights the current selection.
- Page 4 AFN Atlantic SATNET on Galaxy 16 AFN7500HD Decoder Settings and Channel Guide You can also manually enter the decoder settings for your decoder by following the instructions below. From the “Select Satellite” menu page, use the circular navigation wheel on your AFN7500HD decoder remote control to select the “Transponder”...
- Page 5 AFN Atlantic SATNET on Galaxy 16 AFN7500HD Decoder Settings and Channel Guide The next screen will show a progress bar. When configuration is complete, the next screen will show that the decoder is acquiring the AFN services. Current as of 20211104...
- Page 6 AFN Atlantic SATNET on Galaxy 16 AFN7500HD Decoder Settings and Channel Guide When you see Services found: ## (shown below), press “Continue.” Note: The number of ‘Services found’ will vary depending upon your location and the specific satellite you are receiving the signal from. Press OK to continue, and the decoder will return to the Satellite Setup menu, with the channel image displayed behind the menu.
- Page 7 AFN Atlantic SATNET on Galaxy 16 AFN7500HD Decoder Settings and Channel Guide This programming is available to AFN Direct to Home and AFN Satellite Network (SATNET) customers outside of the United States, its territories and possessions in North and Central America and the Caribbean.