Available languages
Available languages
Quick Links
Installation
Instructions
Before you begin
STOP
Read these instructions completely
and carefully.
IMPORTANT
for local inspector's use.
IMPORTANT
codes and ordinances.
Note to Installer – Be sure to leave these
instructions with the Consumer.
Note to Consumer – Keep these instructions
with your Owner's Manual for future
reference.
WARNING:
To prevent electric shock, disconnect electrical
power supply to dishwasher before changing
panels. Do not operate dishwasher while
changing panels or when lower access panel
assembly is removed.
TOOLS AND MATERIALS
REQUIRED:
• 1/4" socket driver
• Phillips screwdriver
• Electric drill
• 1/8" drill bit
• Masking tape
• Safety glasses
• Center punch
• Gloves to protect against sharp edges
The GPF325 trim kits provide for the installa-
tion of 1/4" thick custom door and access
panels.
KIT INCLUDES:
• Left, right and bottom door trim
• Top and bottom access panel trim
• Color matched screws
– Save these instructions
– Observe all governing
GPF325 SERIES KITS
1/4" Custom Dishwasher Door
and Access Panel Kit
GPF325A, Almond Trim Kit
GPF325B, Black Trim Kit
GPF325C, Bisque Trim Kit
GPF325W, White Trim Kit
1 CUT 1/4" THICK CUSTOM
PANELS TO SIZE
• Cut door panel and access panel to the
dimensions shown.
NOTE: The trim provided will conceal the cut
edges of the panels.
1/4" Thick
Door Panel
1/4" Thick Access Panel
23-9/16"
18-7/8"
3-11/16"
Related Manuals for GE GPF325 Series
Summary of Contents for GE GPF325 Series
- Page 1 GPF325 SERIES KITS 1/4" Custom Dishwasher Door Installation and Access Panel Kit Instructions GPF325A, Almond Trim Kit GPF325B, Black Trim Kit GPF325C, Bisque Trim Kit GPF325W, White Trim Kit 1 CUT 1/4" THICK CUSTOM Before you begin PANELS TO SIZE...
- Page 2 2 RETIRE EL CONJUNTO DEL PANEL DE ACCESO INFERIOR Escutcheon Escutcheon • Remove the two screws below the access panel. Retain screws. • Loosen the two screws located between the Door Door door and the access panel. Do not attempt Panel Panel to remove these screws.
- Page 3 3 INSTALL DOOR PANEL TRIM AND CUSTOM PANEL (continued) • The notch on the side trim pieces goes • Slide custom door panel under the towards the front. Slide side trim up and “Z” trim and bottom trim. under the escutcheon and over the edge of the custom panel.
-
Page 4: Installation Options
4 INSTALL CUSTOM INSTALLATION OPTIONS ACCESS PANEL This trim kit is designed to accommodate 1/4" thick panels. A raised panel screwed or • Place 1/4" custom panel in position on the glued to 1/4" thick backing can be used. access panel assembly. Use masking tape to The raised portion of the panel must be hold in position. - Page 5 JUEGOS DE LA SERIE GPF325 Juego de panel de acceso y puerta Instrucciones personalizado de 1/4 de pulg. (6 mm) del lavavajillas de instalación GPF325A, Juego de molduras almendra GPF325B, Juego de molduras negras GPF325C, Juego de molduras esmaltadas GPF325W, Juego de molduras blancas 1 CORTE LOS PANELES Antes de comenzar PERSONALIZADOS DE 1/4 DE...
- Page 6 2 RETIRE EL CONJUNTO DEL PANEL DE ACCESO INFERIOR Lámina Escutcheon • Retire los dos tornillos que están debajo del panel de acceso. Conserve los tornillos. • Afloje los dos tornillos situados entre la Panel de puerta Door puerta y el panel de acceso. No trate de Panel retirar estos tornillos.
- Page 7 3 INSTALE LAS MOLDURAS DEL PANEL DE PUERTA Y EL PANEL PERSONALIZADO (CONTINUACIÓN) • La ranura en las molduras laterales se • Deslice el panel de puerta debe orientar hacia el frente. Deslice la personalizado bajo la moldura en moldura lateral hacia arriba y debajo de “Z”...
-
Page 8: Opciones De Instalación
4 INSTALE EL PANEL DE ACCESO OPCIONES DE INSTALACIÓN PERSONALIZADO Este juego de molduras se puede colocar en paneles de 1/4 de pulg. (6 mm) de espesor. • Ponga el panel personalizado de 1/4 de Se puede usar un panel sobresaliente pulg.