ABB ControlMaster CM15 Instructions
Hide thumbs
Also See for ControlMaster CM15:
- User manual (104 pages) ,
- Commissioning instructions (28 pages) ,
- Manual (88 pages)
Quick Links
Instruction IN/RandC/003–EN Rev.A
ControlMaster controllers and indicators
ConfigPilot
Creating, uploading and downloading configurations
Measurement made easy
1 Introduction
A configuration for a ControlMaster (both controller and
indicator) can be created, modified and backed up to a
PC using the ConfigPilot software program.
ConfigPilot is a utility used in conjunction with a USB
IrDA adaptor and can be downloaded from:
www.abb.com/recorders.
2 Items required
2.1 ConfigPilot kit
Description
USB IrDA adaptor
This publication
Table 2.1 ConfigPilot kit CM30/0715
Part no.
B12895
IN/RandC/003-EN
3 Firmware revision
The following instrument firmware revisions are compatible with
ConfigPilot:
Instrument
Firmware revision
CM15|P2|00|02|22
CM15
CM15|P2|01|02|22
CM10|P2|00|02|22
CM10
CM10|P2|01|02|22
CM30
CM30|P2|00|02|22
CM50
CM50|P2|00|02|22
CMF160
CMF160|P2|00|02|22
CMF310
CMF310|P2|00|02|22
Table 3.1 Instrument firmware revisions
IMPORTANT (NOTE) If using an earlier firmware
revision, contact your local ABB representative for more
information.
or later
or later
or later
or later
or later
or later
Related Manuals for ABB ControlMaster CM15
Summary of Contents for ABB ControlMaster CM15
- Page 1 2.1 ConfigPilot kit Table 3.1 Instrument firmware revisions Description Part no. USB IrDA adaptor B12895 IMPORTANT (NOTE) If using an earlier firmware This publication IN/RandC/003-EN revision, contact your local ABB representative for more information. Table 2.1 ConfigPilot kit CM30/0715...
- Page 2 CM15 window. d. The Useful Links window displays a number of useful links such as the ABB website and links to product documentation. Section 6 explains the purpose of each of the icons. CMF160 / .
- Page 3 6 Icons 8. Select the Read icon. . If the configuration is already open, a warning dialog Note 6.1 Creating a new configuration is displayed to indicate the existing configuration will be 1. Select the New icon. overwritten – a warning displayed on first read.
- Page 4 Parameters can be excluded / included at the menu level contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts – is forbidden without prior written consent of ABB. by selecting from the tree view on the left hand side and clicking on the Update button.