Fujitsu fi-4110CU Operator's Manual

Image scanner
Hide thumbs Also See for fi-4110CU:

Quick Links

C150-E194-01EN
fi-4110CU Image Scanner
Operator's Guide
Table of Contents
loading

Summary of Contents for Fujitsu fi-4110CU

  • Page 1 C150-E194-01EN fi-4110CU Image Scanner Operator’s Guide...
  • Page 2 FOR SAFE OPERATION Treatment of This Manual Since this manual contains important information for using the fi-4110CU, read it thoroughly before using the product. Use the fi-4110CU only after thoroughly reading and understanding especially the section "Important Alert Messages" in this manual. Keep this manual handy, and store it carefully.
  • Page 3 Notice to Hiermit wird bescheinigt, daß der/dieldas German Users · fi-4110CU in Übereinsstimmung mit den Bestimmungen der · AmtsblVfg 243/1991 funkentstört ist. Der Deutschen Bundespost wurde das Inverkehrbringen dieses Gerätes angezeigt und die Berechtigung zur Überprüfung der Serie auf Einhaltung der Bestimmungen eingeräumt.
  • Page 4 NERGY Trademark Acknowledgment Fujitsu is a registered trademark of Fujitsu Limited. The contents of this manual may be revised without prior notice. The contents of this manual shall not be disclosed in any way or reproduced in any media without the express written permission of Fujitsu Limited.
  • Page 5 Preface Thank you very much for your purchase of the fi-4110CU Image Scanner. The fi-4110CU Image Scanner can read very fine color images. As this manual explains the basic handling of the scanner, read it carefully to use the scanner properly.
  • Page 6 Every user is requested to use this product including the manuals and software supplied with the product at the user's own responsibility. Fujitsu assumes no liability with respect to any damage or loss caused to data as the result of using this product.
  • Page 7: Table Of Contents

    CHAPTER 1 Notes Concerning Use ... 1-1 Outline ... 1-1 1.1.1 fi-4110CU Image Scanner ... 1-1 Confirming the Content of Packing Box ... 1-1 Component Names and Functions ... 1-2 CHAPTER 2 Installation and Connection... 2-1 Notes Concerning Installation ... 2-1 Mounting the Document Support ...
  • Page 8 Regular Replacement Components ... 4-6 4.4.2 Procedure for Replacing the Pad Unit... 4-6 4.4.3 Procedure for Replacing the Pick Roller Unit... 4-7 CHAPTER 5 When You Suspect That a Fault Occurred...5-1 APPENDIX Installation Specifications ... A-1 fi-4110CU Image Scanner Operator’s Guide...
  • Page 9: Chapter 1 Notes Concerning Use

    This section provides an outline of the fi-4110CU Image Scanner and explains its characteristics. 1.1.1 fi-4110CU Image Scanner The fi-4110CU Image Scanner can read very fine color images. It can also work with attached software as follows: · Scan software enables the saving of data scanned with the scanner in TIFF format in a personal computer.
  • Page 10: Component Names And Functions

    1.3 Component Names and Functions This section shows the components of the scanner and explains their functions. Front Automatic document feeder Stacker Component Name Document support Document guide Automatic document feeder (ADF) Document support Document guide Operator panel Function Accommodates documents to be read by the automatic document feeder.
  • Page 11 If the application software fails to get ready and the function No. display is restored, the Send to or Scan processing is canceled. fi-4110CU Image Scanner Operator’s Guide Function Adjusts copy density (dark/light) in five stages.
  • Page 12 Inlet Function Opens and closes the automatic document feeder. Accommodates the AC adapter. Accommodates an interface cable to be connected to a personal computer. (Type B connector) Facing roller Function Sends documents. fi-4110CU Image Scanner Operator’s Guide Plastic roller...
  • Page 13: Chapter 2 Installation And Connection

    CHAPTER This section explains how to install the image scanner and connect it to a personal computer. See Appendix A, “Installation Specifications,” for the external dimensions of the image scanner. 2.1 Notes concerning Installation When installing the image scanner, adhere to the following installation location and environment notes: fi-4110CU Image Scanner Operator’s Guide...
  • Page 14: Mounting The Document Support

    For information regarding the setup of the document support and the stacker, see Section 2.4, “Setting up the stacker and Document Support.” fi-4110CU Image Scanner Operator’s Guide...
  • Page 15: Connection

    2.3 Connection This section explains how to connect this scanner and the computer, and also how to install the driver and other software. 2.3.1 Notes concerning Connection When connecting cables, adhere to the following notes: fi-4110CU Image Scanner Operator’s Guide...
  • Page 16: Confirming The System Conditions

    2) Insert the AC adapter into the outlet. ACアダプタ用コネクタ u Key point - The image scanner is not equipped with a power switch. When connecting a cable or changing the setting, first be sure to disconnect the power cable from the outlet.
  • Page 17: Connecting To The Computer

    2) Connect the type A connector (opposite) of the interface cable to the USB port of the computer or a USB hub. u Note - Be sure to use the USB cable which comes as an accessory with this scanner. (Note that we does not certify the correct operation of a commercial USB cable.) - When connecting to a USB hub, use the first stage USB hub that is closest to the computer.
  • Page 18: Setting Up The Stacker And Document Support

    1) Hold the tab of the stacker and pull. 2) Insert a finger into the dent at the center of the stacker, then lift and pull the Stacker B. Stacker B Dent fi-4110CU Image Scanner Operator’s Guide...
  • Page 19 3) When using an A4-size document, raise the Paper Extension of the document support as shown below. Paper Extension fi-4110CU Image Scanner Operator’s Guide...
  • Page 20: Chapter 3 Operation

    This section provides notes concerning operation, and explains how to read each document. 3.1 Notes concerning Operation When operating the equipment, adhere to the following points: fi-4110CU Image Scanner Operator’s Guide Operation Fire or electrical shock - If heat, smoke, offensive odor, or noise is...
  • Page 21: Before Scanning Or Copying A Document

    If lightening occurs nearby, disconnect the power plug from the outlet; otherwise, the equipment may be damaged. - Fault Do not push auto-fed paper too strongly or place heavy objects on it. Doing so may cause the equipment to malfunction. fi-4110CU Image Scanner Operator’s Guide...
  • Page 22: Confirming Document Condition

    · Paper lighter than 45 kg /ream (52.3 g/m · Paper of uneven width fi-4110CU Image Scanner Operator’s Guide - High-quality paper - PPC paper (paper specified by Xerox Corporation) 45 to 90 kg/ream (52.3 to 104.7 g/m A4, A5, B5, letter size, legal size, and name card size (A8)
  • Page 23: Setting Documents

    Key point Set the documents as follows: For single-side reading: Place the reading side facing the document support surface. For double-sided reading: Place the surface (first page) facing the document support surface. and similarly loosen it. fi-4110CU Image Scanner Operator’s Guide...
  • Page 24: Scanning Documents

    Base side 3.3 Scanning Documents This section explains how to scan documents. 1) Make sure that the powers of the personal computer and the scanner are ON. 2) Check the document condition. For details, see Section 3.2.1, "Confirming Document Condition."...
  • Page 25 TWAIN driver, you must select "Follow Instructions on the Operator Panel of the Equipment" on the operation environment setting screen of the device driver. Document guide Function No. display panel Duplex button Scan button Stacker fi-4110CU Image Scanner Operator’s Guide...
  • Page 26: Chapter 4 Daily Maintenance

    2) Open the automatic document feeder by pulling it toward you while raising the cover opening lever. Automatic Document 3) Remove the jammed document. fi-4110CU Image Scanner Operator’s Guide Daily Maintenance Be aware of high – temperature in the glass surface of Automatic Document Feeder (ADF).
  • Page 27: Daily Maintenance

    Check that both edges are closed completely 4.2 Daily Maintenance To use the image scanner over a long period of time, you must perform some tasks daily. Keep the following point in mind: · If the equipment surface, document support, or automatic document feeder is soiled, clean it according to Section 4.3, "Cleaning."...
  • Page 28: Cleaning

    This section explains how to clean the image scanner. 4.3.1 Cleaning the Surface of the Scanner and the Document Support This section explains how to clean the scanner surface and the document support. · Use a dry cloth or a cloth moistened with a small amount of neutral detergent or isopropyl alcohol.
  • Page 29 (As a guideline, the eject roller rotates one revolution every seven presses.) If many foreign matters stick to the roller, the roller becomes slippery; therefore, thoroughly clean it. fi-4110CU Image Scanner Operator’s Guide...
  • Page 30 Pick spring Round button Parts to be Cleaned on the Automatic Document Feeder 3) Restore the automatic document feeder into position. fi-4110CU Image Scanner Operator’s Guide Feed roller Pick arm Facing roller Cover open lever Operator panel After restoring the automatic document feeder into position, make sure that it is closed completely.
  • Page 31: Consumables And Regular Replacement Components

    Pull out the pad unit by using such as a ballpoint pen at both ends (a and b) of the pad unit. fi-4110CU Image Scanner Operator’s Guide Replacement cycle (standard) Every 12,000 sheets or annually Every 50,000 sheets or annually...
  • Page 32: Procedure For Replacing The Pick Roller Unit

    4) Remove the pick roller unit. Press the paw of the pick roller unit inward, hold the knob, and raise the pick roller unit while turning it (in the arrow direction). fi-4110CU Image Scanner Operator’s Guide Pick arm Pad unit Pad unit Check that the pad unit is mounted completely.
  • Page 33 Push the paw and the center of the pick roller unit with your hands to completely insert the pick roller. Knob Check that the pick roller unit is mounted completely. If the pick roller unit is mounted correctly, a document feeding error such as a paper jam may occur. fi-4110CU Image Scanner Operator’s Guide...
  • Page 34: Chapter 5 When You Suspect That A Fault Occurred

    CHAPTER When you suspect a fault occurred while using the image scanner, check the items listed below. Problem Power is not turned on Reading does not start Result of reading graphics and photographs is unsatisfactory. Results of reading characters and...
  • Page 35 *1 Double feeding means that two or more sheets of paper are fed together. Item to be Checked Clean the pick roller according to Section 4.3, "Cleaning." Replace the pick roller unit. Remove foreign matter from the transfer path (see Section 4.1, "Handling a Paper Jam"). fi-4110CU Image Scanner Operator’s Guide Correction...
  • Page 36: Installation Specifications

    Operating consumption Not operating Permissible range Equipment status of temperature and humidity Temperature ( Humidity (%) External dimensions fi-4110CU Image Scanner Operator’s Guide Installation Specifications Width 308.5 Operating 5 to 35 30 to 80 Specification Depth Height 100 V to 240 V...
  • Page 37 Image Scanner Operator’s Guide...
  • Page 38: Declaration Of Conformity

    Declaration of Conformity fi-4110CU Image Scanner Operator’s Guide...
  • Page 39 Image Scanner Operator’s Guide...

This manual is also suitable for:

C150-e194-01en

Table of Contents