Summary of Contents for LG Therma V PHDPA
- Page 1 INSTALLATION MANUAL DRAIN PAN • Please read this installation manual completely before install- ing the product. • Please retain this installation manual for future reference after reading it thoroughly. TYPE : Air-to-Water Heat Pump PHDPA www.lg.com P/NO : MFL67259901...
- Page 2 Drain Pan Installation Manual TABLE OF CONTENTS 1. Safety Precautions..................3 2. Supplies ......................5 3. How to Install....................6 4. Attention .......................7 2 Air-to-Water Heat Pump...
-
Page 3: Safety Precautions
Safety Precautions 1. Safety Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. n Be sure to read before installing the product. n Be sure to observe the cautions specified here as they include important items related to safety. n Incorrect operation due to ignoring instruction will cause harm or damage. - Page 4 Safety Precautions n Installation Install the drain hose to ensure that water is Do not install the Product without gloves. drained away properly. • A bad connection may cause water leakage • There are sharp and moving parts that could and unpleasant odor.
-
Page 5: Supplies
Supplies 2. Supplies 1. Drain Pan (a) .......................1 EA 2. Drain Pan (b) .......................1 EA 3. Insulator (a) .........................1 EA 4. Insulator (b) .........................1 EA 5. Insulator (c) ........................1 EA 6. Screw ...........................4 EA 7. Tie ..........................4 EA 8. Installation manual .......................1 EA Drain pan (a) (at the bottom of the front panel) Insulator (c) -
Page 6: How To Install
How to Install 3. How to Install 1. Uncover the front panel. 2. Assemble the Drain pan(b). - Four pipes are fastened by ties. - Cut the unnecessary part of ties. 3. Attach the Insulator (c) to the rear side of the 4. -
Page 7: Attention
Attention 4. Attention 1. Four pipes (two refrigerant pipes and two water pipes) should be fastened to the Drain Pan (b) with ties. 2. The drain hose (field supply) should be wrapped by thermal insulator (field supply) with minimum 10 mm thickness. - Be sure that there is no water leakage at the connection of the drain hose.