Table of Contents
TRANSMISSION AND FRONT GEARCASE
SPECIFICATION CHART
GEARCASE
LUBRICANT
Transmission
Front Gearcase
Demand Drive Fluid
TRANSMISSION LUBRICATION
NOTE
It is important to follow the transmission maintenance
intervals described in the Periodic Maintenance Chart.
Regular lubricant level inspections should be performed
as well.
The transmission lubricant level should be checked and
changed in accordance with the maintenance schedule.
• Be sure vehicle is positioned on a level surface when
checking or changing the lubricant.
• Check vent hose to be sure it is routed properly and
unobstructed.
Transmission Lubricant Level Check
The fill plug is located on the rear portion of the
transmission gearcase. Access the fill plug at the rear of
the vehicle. Maintain lubricant level even with the bottom
of the fill plug hole.
1. Position vehicle on a level surface.
q
2. Remove the fill plug
and check the lubricant level.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
CAPACITY
without turf mode:
44 oz
(1300 mL)
AGL
with turf mode
(INT'L):
40.5 oz
(1200 mL)
8.5 oz
(250 mL)
3. If lubricant level is not even with bottom threads
4. Reinstall the fill plug and torque to specification.
5. Remove the fill plug (see Chapter 2 – Transmission
6. Place a drain pan under the transmission drain plug.
7. Remove drain plug
8. Clean the drain plug magnetic surface.
9. Reinstall the drain plug and torque to specification.
FILL / DRAIN PLUG TORQUE
14 ft-lbs (19 Nm)
10 ft-lbs (14 Nm)
add recommended lubricant as needed. Do not
overfill.
TORQUE
Transmission Fill / Drain Plug Torque:
14 ft-lbs (19 Nm)
Transmission Lubricant Change
The drain plug is located on the bottom of the
transmission gearcase. Access the drain plug
through the drain hole in the skid plate.
Lubrication, page 2.27).
e
and allow lubricant to drain
completely.
MAINTENANCE
2
w
,
2.27
Chapters
Table of Contents
Troubleshooting
