Husqvarna BV 30 Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Power Tool Accessories
  5. BV 30
  6. Operator's manual

Husqvarna BV 30 Operator's Manual

Hide thumbs
Table of Contents

Quick Links

BV 30
EN
Operator's manual
2-17
Table of Contents
loading

Related Manuals for Husqvarna BV 30

Summary of Contents for Husqvarna BV 30

  • Page 1 BV 30 Operator's manual 2-17...

  • Page 2: Table Of Contents

    Contents Introduction..............2 Troubleshooting............11 Safety................4 Transportation, storage and disposal......12 Assembly................ 7 Technical data ............. 13 Operation................ 9 Accessories..............14 Maintenance..............10 Declaration of Conformity..........16 Introduction Product description For concrete layers thicker than 100 mm, vibration with an internal vibrator is necessary. The product is a vibrating walk-behind concrete screed with a gasoline combustion engine.
  • Page 3 5. Throttle control 6. Handle 7. Support 8. Lock levers for the handle 9. Vibration damping unit 10. Square washer 11. M12 screw 12. Type plate 13. Operator's manual Symbols on the product WARNING: This product can be dangerous and cause serious injury or death to the operator or others.

  • Page 4: Safety

    UKCA label 1. Product type 2. Product number 3. Product weight 4. Serial number 5. Manufacturer 6. Rated power 7. Production year Product liability The product agrees with the applicable UK directives. Type plate As referred to in the product liability laws, we are not liable for damages that our product causes if: •...
  • Page 5 Safety instructions for operation in fingers, hands, wrists, arms, shoulders, and/or nerves and blood supply or other body parts. The injuries can be debilitating and/or permanent, and can increase gradually during weeks, months or WARNING: Read the warning instructions years. Possible injuries include damage to the blood that follow before you use the product.
  • Page 6 • Do not breathe the exhaust fumes. Husqvarna service agent. • Make sure that the airflow in the work area is sufficient. This is very important when you operate...

  • Page 7: Assembly

    To do a check of the vibration damping system • Do not use your fingers to examine the engine for leaks. 1. Make sure that there are no cracks or deformation • Keep fuel in approved containers only. on the vibration damping units. •...
  • Page 8 a) Attach the square washers (A) with the M12 2. Remove the 7 screws and the cover for the eccentric screws (B). Torque the M12 screws to 80 Nm element. with a 18 mm wrench. The square washers and the M12 screws are supplied with the product. 3.

  • Page 9: Operation

    Operation Introduction b) If the engine is warm or the ambient temperature is high, open the choke. 3. Make sure that the throttle control is set to idle speed. WARNING: Read and understand the safety chapter before you use the product. To do before you operate the product •...

  • Page 10: Maintenance

    To operate the product b) Operate the product between the wet concrete areas to make 2 parallel strips (B). The strips 1. Spray the lowest part of the beam with concrete form must be 30-45 cm/11.8-17.7 in. wide. oil or concrete release agent. This makes it easier to clean the product after operation because the concrete does not attach to the beam.

  • Page 11: Troubleshooting

    Maintenance Each 2 After the Yearly or Each use Each 25h Each 50h years or first 10h each 100h each 300h Make sure that there are no fuel or oil leaks. Make sure that nuts and screws are tightened. Do a check of the fuel level and the engine oil level.

  • Page 12: Transportation, Storage And Disposal

    Discard all chemicals, such as engine oil or fuel, at a service center or at an applicable disposal location. • When the product is no longer in use, send it to a Husqvarna dealer or discard it at a recycling location. 1294 - 004 - 01.12.2021...

  • Page 13: Technical Data

    Technical data Weight, kg/lb 14/30 Engine brand / Type * Honda / GX35 Engine power *, kW/hp @rpm 1.2/1.6 @7400 Fuel * Unleaded gasoline, max. 10% ethanol Fuel tank capacity *, l/qts 0.65/0.69 Oil tank capacity *, l/qts 0.1/0.1 * = For further information and questions about this specific engine, refer to the engine manual or the web site of the engine manufacturer.

  • Page 14: Accessories

    Product dimensions Max. handle width, mm/in. 700/27.5 Width without handles, mm/in. 580/22.8 Height without handles, mm/in. 670/26.4 Length, mm/in. 800/31.5 Height including handles, mm/in. 800–1300/31.5–51.2 Beam width, 5 different dimensions, mm/in. 1.8/6, 2.4/8, 3.0/10, 3.6/12, 4.2/14 Accessories Beams Length, m/ft Weight, kg/lb 1.82/6.0 6.6/14.7...
  • Page 15 Refer to the spare part list (IPL) for part numbers for the beams. 1294 - 004 - 01.12.2021...

  • Page 16: Declaration Of Conformity

    Declaration of Conformity EC Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Concrete Compactor, Vibrating Beam Brand Husqvarna Type/Model BV 30 Identification Serial numbers dating from 2021 and onwards...
  • Page 17 UK Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, SWEDEN, Tel: +46 36 146500 declare on our sole responsibility that the product: Description Concrete Compactor, Vibrating Beam Brand Husqvarna Type/Model BV 30 Identification Serial numbers dating from 2021 and onwards...
  • Page 18 1294 - 004 - 01.12.2021...
  • Page 19 1294 - 004 - 01.12.2021...
  • Page 20 www.husqvarnacp.com Original instructions 1159985-26 2021-12-01...

Table of Contents