1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Scanner
  5. M3097E Plus
  6. Operator's manual

Fujitsu M3097E Plus Operator's Manual

Image scanner
Hide thumbs Also See for M3097E Plus:
Table of Contents

Quick Links

C150-E048-02EN
M3097E + AND M3097G +
IMAGE SCANNER
OPERATOR'S GUIDE
Table of Contents
loading

Related Manuals for Fujitsu M3097E Plus

Summary of Contents for Fujitsu M3097E Plus

  • Page 1 C150-E048-02EN M3097E + AND M3097G + IMAGE SCANNER OPERATOR’S GUIDE...

  • Page 2: Revision Record

    REVISION RECORD Revised contents Specification No.: C150-E048-02EN The contents of this manual is subject to change without prior notice. All Rights Reserved, Copyright ©1996 FUJITSU LIMITED...

  • Page 3: Important Note To Users

    IMPORTANT NOTE TO USERS READ CAREFULLY ALL OF THIS MANUAL BEFORE USING THIS PRODUCT. IF NOT USED CORRECTLY, UNEXPECTED DAMAGES MAY BE CAUSED TO THE USERS OR THE BYSTANDERS. Conventions for Alerts This manual uses the following coventions for alerts to prevent physical or property damages to users or bystanders.

  • Page 4: Table Of Contents

    CHAPTER 2 COMPONENTS ... 2-1 2.1 Checking the Components ... 2-1 2.2 Part Names and Functions ... 2-2 2.2.1 Exterior view of image scanner ... 2-2 2.2.2 Functions of each part ... 2-3 2.3 Operator Panel Functions ... 2-4 2.3.1 Indicators ... 2-5 2.3.2 Buttons and liquid crystal display screen (M3097E+) ...
  • Page 5 CHAPTER 5 MAINTENANCE ... 5-1 5.1 Removing Jammed Documents ... 5-1 5.2 Notes on Daily Use... 5-2 5.3 Cleaning ... 5-2 5.3.1 Cleaning the document cover, document holding pad, and document bed ... 5-2 5.3.2 Cleaning the ADF... 5-3 5.3.3 Cleaning the coupled feed roller ... 5-4 5.3.4 Cleaning the mirror ...
  • Page 6 Figure 2.1 Received components ... 2-1 Figure 2.2 M3097E+/G+ parts names ... 2-2 Figure 2.3 M3097E+ operator panel ... 2-4 Figure 2.4 M3097G+ operator panel ... 2-4 Figure 4.1 Flatbed reading ... 4-3 Figure 4.2 Removing the document cover ... 4-4 Figure 4.3 ADF paper chute setting ...
  • Page 7 Table 1.1 The differences between the M3097E+ and the M3097G+ ... 1-1 Table 6.1 Check items ... 6-1 Table A.1 Installation specifications ... A-1 Reader Comment Form TABLES page...

  • Page 8: Chapter 1 Preface

    RS232C VIDEO M3097G+ SCSI2 This manual should be read before operating the image scanner to ensure correct operation. Note on Copyright Act This document cannot be reproduced or copied for any use other than private without the author’s permission. Shipping...
  • Page 9 This page is intentionally left blank. 1 – 2...

  • Page 10: Chapter 2 Components

    2.1 Checking the Components These high precision components must be handled with care. Confirm that all the components shown in figure 2.1 have been received. If any component is missing, please contact your local Fujitsu sales person. Image scanner Operator’s Guide...

  • Page 11: Part Names And Functions

    This section shows the exterior view of image scanner. This section also provides names of each part and describes their functions. 2.2.1 Exterior view of image scanner The image scanner can read a document of A3 or double-letter size at maximum. Document cover...

  • Page 12: Functions Of Each Part

    Stacks the read documents. Keeps the stacked documents from overhanging. Turns the power on or off. Used to control image scanner opera- tions. See the next section for details of the functions. Holds the documents to be fed by the automatic document feeder.

  • Page 13: Operator Panel Functions

    2.3 Operator Panel Functions The operator panel has indicators and a liquid crystal display screen for displaying image scanner status. The operator panel also has operation buttons. Liquid crystal display screen Figure 2.3 M3097E+ operator panel Liquid crystal display screen Figure 2.4 M3097G+ operator panel...

  • Page 14: Indicators

    Lights to indicate the power is on. Ready (for reading) indicator (Green) (M3097E+): Lights when the image scanner becomes ready to read a docu- ment in the manual mode. This indicator turns off when the start button is pressed to read a document.
  • Page 15 Liquid crystal display screen The screen has two message lines. The current read mode status is displayed in the upper line, and messages and the modes set by the buttons are displayed in the lower line. Upper line Lower line Reading mode Flatbed Automatic document feeder...
  • Page 16 The ADF, size, density, resolution, landscape, half-tone, document, and mode 1 and 2 buttons described below are effective unless other- wise specified by the host system. Automatic document feeder (ADF) button: Selects whether to feed documents automatically by ADF or manually on the flatbed.
  • Page 17 Density button: Selects a density for the read operation. When this button is pressed, the lower line is displayed as shown in Screen 3. Each time this switch is pressed, the blinking part in the lower line changes, and the density indicated on the upper line changes according to the blinking part.
  • Page 18 Landscape button: Specifies whether reading is done in landscape or portrait mode. When this button is pressed, the lower line is displayed as shown in Screen 5. Each time this button is pressed, the blink- ing part changes in turn, and the mode indicated on the upper line changes accordingly.
  • Page 19 Document button: Selects the type of document. When this button is pressed, the lower line is displayed as shown in Screen 7. Each time this button is pressed, “LINE” or “PHOTO” starts blinking in turn, and the document selection indication displayed on the upper line changes accordingly.

  • Page 20: Buttons And Liquid Crystal Display Screen (M3097G+)

    Mode 2 button: See Section 5.3.4, 5.4 and 5.5. 2.3.4 Messages Error messages (temporary errors) If a temporary error occurs in the scanner, one of the following mes- sages is displayed. This message is displayed if there is no more paper on the ADF paper chute during a read operation in ADF mode.
  • Page 21 Device errors One of the following messages is displayed if an device errors in the scanner. If one of the following error messages is displayed, turn the power off and then on again. If the same message is displayed again, contact your service representative.

  • Page 22: A.1 Installation Specifications

    This chapter explains how to install and connect the image scanner. 3.1 Precautions Do not install the image scanner in the following places and environ- ments. See the appendix A.1 “Installation Specifications” for the information such as size of installation space.

  • Page 23: Removing The Carrier Fixing Bracket

    Place the image scanner on the edge of the desk top so that the left side (where ADF is placed) of the scanner extends from the desk top. Do not set the image scanner upside down or on its side.

  • Page 24: Connections

    Connect the image scanner using the following procedure. Set the power switch to off. Connect the power cable. Connect the power cable to the power inlet on the back of the image scanner. Connect the other end of the power cable to a power outlet. Power inlet Connect the interface cables (for M3097E+).
  • Page 25 Connect the interface cables to the interface connectors and fasten the cables with the catches. Connect the other ends of the cables to the host system. If the image scanner is at the terminal side, connect the terminator. Back of the image scanner...

  • Page 26: Mounting The Stacker

    3.4 Mounting the Stacker Mount the stacker and extensions using the following procedure. Mount the stacker. Hook the pins on the stacker to the claws on the image scanner. Stacker Claw Mount the extensions. Mount extensions to the stacker and to the ADF paper chute.
  • Page 27 This page is intentionally left blank. 3 – 6...

  • Page 28: Chapter 4 Operations

    CHAPTER 4 OPERATIONS 4.1 Turning on the Power 4.2 Reading a Document in Flatbed Mode 4.3 Reading Documents in ADF Mode Documents can be read in the flatbed mode or automatic document feeder (ADF) mode. In the flat-bed mode, each document is placed on the document bed and is read one by one. In ADF mode, documents are fed and read automatically.

  • Page 29: Reading A Standard-Size Document

    For M3097E+, select a reading mode from the operator panel and start the read operation. For the M3097G+, the scanner starts the read operation by a command from the host system. Do not press on or open the document cover during the read operation.

  • Page 30: Reading A Page From A Thick Book

    Reference mark Document Operator panel Figure 4.1 Flatbed reading Landscape mode 4.2.2 Reading a page from a thick book To read a page from a thick book, remember the following points: Do not close the document cover forcibly. Keep the cover open for reading.

  • Page 31: Reading A Document Larger Than The Document Board

    NOTICE Do not remove the document cover for any other purpose. Do not use a different screw to fix the document cover to the scanner. 4 – 4 Document cover Figure 4.2 Removing the document cover...

  • Page 32: Reading Documents In Adf Mode

    4.3 Reading Documents in ADF Mode This section explains how to read documents using the automatic document feeder. If the following steps are not closely followed, a feed error may occur. After documents have been read in ADF mode, a squeaking noise is sometimes heard.

  • Page 33: Figure 4.3 Adf Paper Chute Setting

    Pull up the ADF paper chute as follows: • Hold the document cover with one hand and pull up the ADF paper chute with the other hand to unlock the ADF paper chute. Fan the documents as follows: • Take a 15 to 20 mm thickness of documents. Lightly hold both ends with both hands.
  • Page 34 Take documents to be placed in the ADF paper chute. The thickness of the documents to be placed in the ADF paper chute is limited depending on the size of the documents as follows: A4 or letter size or smaller: 8 mm or less Size larger than A4: Angling the documents Angle the document edges as follows:...

  • Page 35: Figure 4.4 Loading The Document

    10 For the M3097E+, select the reading mode from the operator panel and start the read operation. For the M3097G+, the scanner starts the read operation by a command from the host system. If an incorrect document size or mode (portrait or landscape) is selected, the document may not be read entirely.

  • Page 36: Chapter 5 Maintenance

    CHAPTER 5 MAINTENANCE 5.1 Removing Jammed Documents 5.2 Notes on Daily Use 5.3 Cleaning 5.4 Replacing the Lamp Unit 5.5 SCSI Address Setting (M3097G+) 5.6 Replacing the Pad 5.7 Document counter display and reset This section explains how to remove jammed documents, and provides notes on daily use and cleaning.

  • Page 37: Notes On Daily Use

    NOTICE Do not use organic solvents such as a thinner. • Make sure that no liquid enters the scanner from the edges of the document bed glass. Document cover Document holding pad Figure 5.2 Cleaning the document cover, document holding pad, and document bed...

  • Page 38: Cleaning The Adf

    5.3.2 Cleaning the ADF Clean the ADF once every 5,000 pages. The cycle depends on the types of documents used (page quality, a level of toner fusing on paper). Pull the ADF lever up to open the ADF. Use the dry cloth or a cloth with ethyl alcohol to softly remove dirt and dust as follows.

  • Page 39: Cleaning The Coupled Feed Roller

    5.3.3 Cleaning the coupled feed roller Pull the ADF lever up to open the ADF. Pull the ADF lamp replacement lever up while pushing the lever in the direction indicated by the arrow in Figure 5.4. Clean the surface of the coupled feed roller by the cloth with ethyl alcohol.

  • Page 40: Replacing The Lamp Unit

    5.4 Replacing the Lamp Unit Hot: Replace the lamp unit in the following procedure. If an optical alarm occurs, and the following message is displayed, replace the lamp unit as follows. • Turn off the power once. Then, turn on the power while pressing the mode 1 button.

  • Page 41: Figure 5.4 Lamp Unit Removal 1

    • Pull the ADF lever up and open the ADF. • Pull the ADF lamp replacement lever up while pushing the lever in the direction indicated by the arrow in Figure 5.4. • Hold the lamp unit levers and pull the glass up. Wipe the bottom surface of the glass if it is dirty.

  • Page 42: Figure 5.6 Lamp Unit Replacement

    • Then carefully pull it up with the front and ( 1 in Figure 5.6) first and the back and ( 2 in Figure 5.6) next. If the levers are pulled up carelessly, the lamp may be broken. CAUTION Hot: The lamp surface may be very hot. Be careful not to touch the lamp surface.

  • Page 43: Figure 5.7 Inserting The Glass

    Glass Levers Openings Figure 5.7 Inserting the glass • Close the ADF to lock ADF lever. 5 – 8...

  • Page 44: Scsi Address Setting (M3097G+)

    5.5 SCSI Address Setting (M3097G+) Press the power switch while pressing the mode 1 button. The liquid crystal display unit displays the following screen. Press the mode 2 button to shift the blinking position. To set a device address, press the mode 1 button while “SCSI ID” is blinking. The liquid crystal display screen displays this screen.

  • Page 45: Replacing The Pad

    5.6 Replacing the pad (1) Pull up the ADF open and close lever to open the ADF. (2) Remove the four screws shown in Figure 5.8 to remove the two (3) Install the pad by reversing the removal procedure. NOTICE Attach the pad so that the corner cut is top left.

  • Page 46: Document Counter Display And Reset

    Continue pressing the Mode 1 button until the scanner displays the screen A. Screen A (2) Press the Mode 2 button. The scanner displays Screen B. When the Mode 1 button is pressed from now on the scanner alterna- tively displays Screen A or B.
  • Page 47 This page is intentionally left blank. 5 – 12...

  • Page 48: Chapter 6 Troubleshooting

    Turn off the power once and make an attempt to turn on the power again. If the power is not turned on, contact your Fujitsu service representative. If the ready indicator is on, press the start button. Insert the first a few pages into the slot.
  • Page 49 Section 3.2, “Removing the Carrier Fixing Bracket.” Turn the power off then on again. If the check indicator turns on again, contact the sales person in charge or a Fujitsu service representative. Clean the mirror as explained in Sec- tion 5.3.4.

  • Page 50: Appendix

    APPENDIX A.1 Installation Specifications Table A.1 Installation specifications Item External dimensions (mm) Weight (kg) Input power Voltage Number of phases Frequency Power Temperature and humidity allowed ranges Temperature Humidity Specification Width Depth 100 to 120 VAC, 220 to 240 VAC Single-phase 50/60 Hz 150 VA...

  • Page 51: External Dimensions

    A.2 External Dimensions (Unit: mm) Figure A.1 External dimensions A – 2...
  • Page 54 FUJITSU LIMITED International Operations Marunouchi 1-6-1, Chiyoda-ku, Tokyo 100 JAPAN TEL: (81-3) 3216-3211 FAX: (81-3) 3213-7174 TLX: J22833 Cable: “FUJITSU LIMITED TOKYO” FUJITSU COMPUTER PRODUCTS OF AMERICA, INC. 2904 Orchard Parkway, San Jose, California 95134-2022, U.S.A. TEL: 1-408-432-6333 FAX: 1-408-432-3908 FUJITSU CANADA INC.
  • Page 55 Your other comments may be entered here. Please be specific and give page, paragraph and line number references where applicable. Thank you for your interest. Please send this sheet to one of the addresses in the left page. FUJITSU LIMITED Is the material presented effectively? Fully...

This manual is also suitable for:

M3097g+M3097eM3097g

Table of Contents