Fujitsu Lifebook LH530 Operating Manual

Fujitsu lifebook lh530: user guide
Hide thumbs Also See for Lifebook LH530:
Table of Contents
Available languages

Available languages

Quick Links

System
Operating Manual
LIFEBOOK LH530
Table of Contents
loading

Summary of Contents for Fujitsu Lifebook LH530

  • Page 1 System Operating Manual LIFEBOOK LH530...
  • Page 2 For automatic driver updates, go to: Should you have any technical questions, please contact: • our Hotline/Service Desk (see Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") • Your sales partner • Your sales office We hope you really enjoy using your new Fujitsu system. "http://support.ts.fujitsu.com/com/support/index.html"...
  • Page 4 Brand names may be protected trademarks of the respective manufacturer and/or protected by copyright. Use of these by third parties for their own purposes may constitute an infringement of the holders’ rights. Further information can be found at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26391-K317-Z320-1-8N19, edition 1...
  • Page 5 LIFEBOOK LH530 Operating Manual English ‫عربي‬...
  • Page 6 All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright © Fujitsu Technology Solutions GmbH 2010 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole.
  • Page 7: Table Of Contents

    Loudspeakers and microphones ............32 Fujitsu Technology Solutions...
  • Page 8 ....... 36 ..... . . 53 Fujitsu Technology Solutions...
  • Page 9 FCC regulatory information for notebooks with radio device ......66 Fujitsu Technology Solutions...
  • Page 10: Innovative Technology

    With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better protect your system against unauthorised access by using the powerful password properties. Information on the connections and user components of your notebook can be found in "Ports and controls", Page 6 - English Fujitsu Technology Solutions...
  • Page 11: Further Information

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.
  • Page 12: Ports And Controls

    Front 1 = Microphone 2 = WebCam 3 = Keyboard 4 = ON/OFF switch 5 = Loudspeakers 6 = Touchpad 7 = Touchpad buttons 8 = Memory card slot 9 = Status indicators Fujitsu Technology Solutions...
  • Page 13 2 = LAN port 3 = USB port Right-hand side 1 = USB port 2 = Kensington Lock Fujitsu Technology Solutions 4 = USB port 5 = Microphone jack 6 = Headphone port 3 = Optical drive 4 = DC input connector (DC IN)
  • Page 14: Important Notes

    Importantnotes This chapter contains essential safety information which must be followed when working with your notebook. Other notes also provide useful information which will help you with your notebook. 3 = Kensington Lock 4 = Battery compartment Fujitsu Technology Solutions...
  • Page 15: Safety Notes

    fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page 33 - Fujitsu Technology Solutions "Technical data", Page 61 - before preparing English.
  • Page 16: Energy Saving

    ► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 63 - ""Using the power-management English). Fujitsu Technology Solutions...
  • Page 17: Notebook: Transporting

    To clean the keyboard and the touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu Technology Solutions "Removing and installing the battery", Page 26 - English).
  • Page 18: First-Time Setup Of Your Device

    ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. "Important notes", Page 8 - "Mains adapter connecting", Page 13 - English. English. The Fujitsu Technology Solutions...
  • Page 19: Selecting A Location

    The supplied power cable conforms to the requirements of the country in which you purchased your device. Make sure that the power cable is approved for use in the country in which you intend to use it. Fujitsu Technology Solutions ► Connect the power cable (1) to the mains adapter.
  • Page 20: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet at "http://ts.fujitsu.com/support". ► Switch on your device. Fujitsu Technology Solutions...
  • Page 21: Working With The Notebook

    Description Wireless components indicator • • Fujitsu Technology Solutions "Important notes", Page 8 - The indicator is lit: The wireless components are switched on. The indicator is not lit: The wireless components are switched off. for instructions on how to...
  • Page 22: Switching On The Notebook

    The virtual numerical ► Open the LCD screen. Switching on ► Press the ON/OFF switch for about one second to switch the notebook on. Fujitsu Technology Solutions...
  • Page 23: Notebook: Switching Off

    The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Fujitsu Technology Solutions ► Shut down the operating system properly (e. g. from the Windows Start menu, by clicking on Start –...
  • Page 24 CapsLock Shift key The Shift key causes uppercase characters to appear. In the case of overlay keys, the character printed on the upper left of the key appears when that key is pressed. Shift Shiftkey Alt Gr Fujitsu Technology Solutions...
  • Page 25 Cursor controlkeys Cursor keys Start key The Start key opens the Windows Start menu. Startkey Menu key The Menu key invokes the menu for the marked item. Fujitsu Technology Solutions key enables the special functions indicated on overlay keys (see English).
  • Page 26: Virtual Numeric Keypad

    ► While holding the first key down, press the other key or keys in the combination. Combination 2 = Valid characters when the is activated Description Switching the loudspeakers on and off This key combination switches your notebook’s loudspeakers off and on. Loudspeakers Loudspeakers Fn+F3 "Status Fujitsu Technology Solutions...
  • Page 27 Combination Fujitsu Technology Solutions Description Switching the touchpad and touchpad buttons on/off This key combination switches the touchpad and the touchpad buttons on or off. Fn+F4 Touchpadbuttons Touchpad Touchpad Switching the wireless components on / off This key combination switches the wireless components off or on.
  • Page 28: Country And Keyboard Settings

    This key combination opens the Windows security/Task-Manager window. If the device is locked, the window for entering a password will be opened. Ctrl+Alt+Del Back tab This key combination moves the cursor back to the previous tab stop. Shift+Tab Backtab Fujitsu Technology Solutions...
  • Page 29: Touchpad And Touchpad Buttons

    ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu Technology Solutions 1 = Touchpad 2 = Touchpad buttons "Key combinations", Page 20 -...
  • Page 30: Dragging Items

    Notes LCDscreen High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution which differs from the specification can result in an unclear picture.
  • Page 31: Webcam

    Further information on use of the webcam and additional settings can be found in the help function of the program which uses the webcam. If you wish to carry out a function test with your webcam, you can use the corresponding test software available at "http://ts.fujitsu.com/support/". Rechargeable battery Battery...
  • Page 32: Charging, Caring For And Maintaining The Battery

    If you do not use the batteries for long periods, remove them from the notebook. Never store the batteries in the device. Removing and installing the battery Only use rechargeable batteries approved by Fujitsu Technology Solutions for your notebook. Never use force when fitting or removing a battery.
  • Page 33 ► Remove the battery from the battery compartment (3). Inserting battery ► Position the battery at the edge. ► Place the battery into the battery compartment until you feel it engage. ► Complete the removal, see chapter "Finishing component removal", Page 51 - English. Fujitsu Technology Solutions...
  • Page 34: Optical Drive

    If the CD/DVD indicator does not go out after a data carrier has been inserted, but instead continues to flash, this means that the drive cannot access the data carrier. Either the data carrier is damaged or dirty or you are using a data carrier that the drive cannot read. Fujitsu Technology Solutions...
  • Page 35: Inserting Or Removing A Data Carrier

    CD/DVD: Manualremovalofdatacarrier In the event of a power failure or damage to the drive, you can remove the data carrier manually. Fujitsu Technology Solutions ► Push the insert/eject button (1). The drive tray will open. ► Gently pull the drive tray (2) completely out.
  • Page 36: Using The Power-Management Features

    ► Close all opened programs and completely shut down the notebook. On external power After 10 minutes After 15 minutes After 20 minutes After 1 hour to open the Microsoft Help. On battery power After 5 minutes After 10 minutes After 15 minutes After 30 minutes Fujitsu Technology Solutions...
  • Page 37: Memory Cards

    SDHC • Memory Stick / Memory Stick pro (Sony®) Inserting the memory card Fujitsu Technology Solutions ► Carefully slide the memory card into the slot. The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged.
  • Page 38: Removing The Memory Card

    Information on connecting headphones and a microphone can be found in "Connecting external devices", Page 38 - Wireless LAN/Bluetooth radio components The installation of radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device. ► On devices with card locking: Press on the storage card (1).
  • Page 39: Switching The Wireless Components On And Off

    Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu Technology Solutions to start the WirelessSelector. ► Connect the network cable to the LAN port of the notebook (1).
  • Page 40: Security Functions

    Your password can be up to eight characters long and contain letters and numbers. No distinction is made between uppercase and lowercase. ► Fit the Kensington MicroSaver on the device on your notebook. Kensington MicroSaver UsingaKensington Lock Anti-theftprotection Mechanicalbackup Fujitsu Technology Solutions...
  • Page 41: Protecting Bios Setup Utility (Supervisor And User Password)

    To remove a password (without setting a new password) perform the following steps: User password Supervisorpassword Password ► Start the BIOS Setup Utility and go to the Security menu. Fujitsu Technology Solutions ""Settings in BIOS Setup Utility", Page 52 - English section for...
  • Page 42: Password Protection For Booting Of The Operating System

    If you have not assigned BIOS passwords yet, define the supervisor and the user password now, if desired (see ► Mark the Hard Disk Security field and press the Enter key. "Security functions", Page 34 - English), you English). Fujitsu Technology Solutions...
  • Page 43: Deactivating Hard Disk Protection

    ► To cancel the password for the second hard disk (Drive1), go to the Drive1 area and select the field Set Master Password, then proceed in exactly the same way as for cancelling the password for the first hard disk (Drive0). Fujitsu Technology Solutions...
  • Page 44: Connecting External Devices

    1. Turn off your notebook and all external devices. 2. Unplug your notebook and all devices from the mains sockets. 3. Disconnect the cables for your external devices following the instructions. Devices Peripheraldevices "Important notes", Page 8 - English Fujitsu Technology Solutions...
  • Page 45: Connecting An External Monitor

    You can also use a key combination to switch back and forth between the external monitor and the notebook’s LCD screen, see chapter You can display the same picture on the external monitor and the notebook LCD screen simultaneously. Fujitsu Technology Solutions "Key combinations", Page 20 - "Key English.
  • Page 46: Connecting Usb Devices

    Wait for the dialogue box which tells you that it is now safe to remove the device. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Fujitsu Technology Solutions...
  • Page 47: Connecting External Audio Devices

    The headphone port on your notebook is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu Technology Solutions ► Connect the audio cable to the external device.
  • Page 48: Removing And Installing Components During Servicing

    The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu Technology Solutions...
  • Page 49: Preparing To Remove Components

    As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page 42 - Fujitsu Technology Solutions "Removing the battery", Page 26 - English). "Important notes", Page 8 - English).
  • Page 50: Removing The Cover

    Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu Technology Solutions...
  • Page 51: Installing A Memory Module

    ► Place the cover into its installation position in the direction of the arrow (1). ► Secure the cover with the screws (2). Fujitsu Technology Solutions ► Insert the memory module with the contacts and the recess (a) facing the slot (1).
  • Page 52: Removing And Installing The Hard Disk

    If you install the wrong screws, components may be damaged. ► Lift the cover off the notebook (2). "Removing the battery", Page 26 - English). Fujitsu Technology Solutions...
  • Page 53: Removing A Hard Disk

    If you install the wrong screws, components may be damaged. ► Use the pulling aid to pull the hard disk in the direction of the arrow (2) until the contacts disengage. ► Remove the hard disk from the hard disk compartment (3). Fujitsu Technology Solutions...
  • Page 54: Installing A Hard Disk

    If you install the wrong screws, components may be damaged. ► Place the hard disk into the hard disk compartment (1). ► Push the hard disk in the direction of the arrow (2) until the contacts engage. ► Fasten the screws (3). Fujitsu Technology Solutions...
  • Page 55: Attaching The Cover

    If you install the wrong screws, components may be damaged. ► Tighten the screw (2). ► Insert the battery (see Chapter Fujitsu Technology Solutions "Inserting battery", Page 27 - English).
  • Page 56: Removing And Installing The Optical Drive

    Removing the optical drive ► Prepare for removal, see Harddisk ► Remove the screws (1). The drive is released. ► Pull the drive out of the drive bay (2). "Preparing to remove components", Page 43 - English. Fujitsu Technology Solutions...
  • Page 57: Installing The Optical Drive

    ► Install the battery again (see "Inserting battery", Page 27 - English). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu Technology Solutions...
  • Page 58: Settings In Bios Setup Utility

    ► For future reference, make a note of the changes you have made (for example, in this manual). to select the menu you wish to access to make changes. → ↑ ↓ Fujitsu Technology Solutions...
  • Page 59: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu Technology Solutions...
  • Page 60: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://ts.fujitsu.com/support/downloads.html"...
  • Page 61: Help If Problems Occur

    The SystemDiagnostics program is already installed on devices which were delivered with a Windows operating system. ► To start the SystemDiagnostics program, click on Startsymbol - Program - Fujitsu - SystemDiagnostics. ► If a problem is found during a test run, the SystemDiagnostics program outputs a code (e.g.
  • Page 62: The Notebook's Date Or Time Is Incorrect

    ► Press the key combination to switch the screen output, see "Key combinations", Page 20 - English. Troubleshooting ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen. Fujitsu Technology Solutions...
  • Page 63: The External Monitor Remains Blank

    Cause The wrong external monitor has been selected or the wrong screen resolution has been set for the application program. Fujitsu Technology Solutions Troubleshooting ► Switch the external monitor on. ► Press any key to continue. ► Adjust the brightness of the monitor.
  • Page 64: The Notebook Cannot Be Started

    ► Close the application program or restart the notebook (by restarting the operating system or switching the device off and back on again). ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. Fujitsu Technology Solutions...
  • Page 65: The Printer Does Not Print

    If the error message appears repeatedly, despite troubleshooting measures, please contact the place of purchase or our customer service centre. Error message/cause Fujitsu Technology Solutions Troubleshooting ► Make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer).
  • Page 66 ► Contact your sales outlet or our customer service centre. ► Contact your sales outlet or our customer service centre. ► Contact your sales outlet or our customer service centre. Fujitsu Technology Solutions to access the to access the...
  • Page 67: Technical Data

    Weight (including 6-cell rechargeable battery) The data sheet for the device provides further technical data. You will find the data sheet on your device or on the Internet at "http://ts.fujitsu.com/support". Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://ts.fujitsu.com/support".
  • Page 68: Manufacturer's Notes

    The "Declarations of Conformity" for the device can be found at our Internet address under: "http://ts.fujitsu.com/ce". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Monitor switched off after < 15 minutes of inactivity Automatic activation of energy saving mode (ACPI S3): <...
  • Page 69: Ce Marking

    Federal Communications Commission (FCC) of the USA. Although it is not explicitly forbidden to travel in the US trading area carrying this device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area.
  • Page 70 Places where telephones are specifically installed to alert emergency authorities such as fire, police or medical assistance personnel. • Hospital rooms, residential health care facilities, convalescent homes and prisons. • Hotel, motel or apartment lobbies. • Stores where telephones are used by patrons to order merchandise. Fujitsu Technology Solutions...
  • Page 71: Doc (Industry Canada) Notices

    Repairs to telecommunication equipment should be made by a Canadian authorised maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line.
  • Page 72: Fcc Regulatory Information For Notebooks With Radio Device

    Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.
  • Page 73 In cases in which the policy regarding use of radio devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. Regulatory Information/Disclaimers Fujitsu Technology Solutions...
  • Page 74 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorised by Fujitsu Technology Solutions may invalidate the user’s right to operate this equipment. Fujitsu Technology Solutions...
  • Page 76 ‫المحتوى‬ ١ ...‫التقنية المبتكرة‬ ١ ...‫المزيد من المعلومات‬ ١ ...‫وسائل اإليضاح‬ ٣ ...‫المنافذ وعناصراالستعمال‬ ٦ ...‫إرشادات هامة‬ ٦ ...‫إرشادات السالمة‬ ٦ ...‫إرشادات سالمة إضافية لألجهزة المزودة بمكونات السلكية‬ ٦ ...‫توفير الطاقة‬ ٧ ... Windows ‫توفير الطاقة في نظام التشغيل‬ ٧ ...‫التنقل...
  • Page 77 ٢٦ ... ‫ الالسلكية / تقنية بلوتوث‬LAN ‫المكونات الالسلكية بشبكة‬ ٢٦ ...‫تشغيل وإيقاف المكونات الالسلكية‬ ٢٦ ...WLAN ‫إعداد الدخول لشبكة‬ ٢٧ ...LAN ‫ وشبكة‬Ethernet ‫شبكة‬ ٢٨ ...‫وظائف األمان‬ ٢٨ ... ‫استخدام قفل كينسينجتون‬ ٢٨ ...«‫ ‏‬B IOS ‫ ‏»برنامج المساعدة في إعداد‬BIOS Setup Utility ‫إعداد حماية كلمة السر في برنامج‬ ٢٨...
  • Page 78 ‫المحتوى‬ ٤٩ ...‫بعد التشغيل ال يبدأ الكمبيوتر المحمول في العمل‬ ٤٩ ...‫الكمبيوتر المحمول متوقف عن العمل‬ ٤٩ ...‫الطابعة ال تعمل‬ ٥٠ ...‫االتصال الالسلكي بالشبكة ال يعمل‬ ٥٠ ...‫بالغ الخطأ الصوتي‬ ٥٠ ...‫بالغات الخطأ على الشاشة‬ ٥٢ ...‫المواصفات الفنية‬ ٥٢ ...LIFEBOOK ٥٢...
  • Page 79 ‫المحتوى‬ 1 ‫, اإلصدار‬A26391-K317-Z320-1-8N19 ‫العربية‬...
  • Page 80 ‫ لجهازك على موقعنا على اإلنترنت. هذا الجهاز مصمم من قبل المصنع‬Windows ‫تجد برامج التشغيل الخاصة بنظام التشغيل‬ ‫ أية مسؤولية في حالة استخدام‬Fujitsu Technology Solutions ‫بحيث ال يدعم أية أنظمة تشغيل أخرى. ال تتحمل شركة‬ .‫، إذا كانت هذا المنتجات تدخل ضمن حجم التجهيزات‬Microsoft ‫الموضوعات المتعلقة بالبرامج في هذا الدليل تشير إلى منتجات‬...
  • Page 81 ‫إشارة عرضية إلى فصل آخر مثل إرشادات السالمة‬ ‫إشارة عرضية إلى مصدر خارجي، مثل عنوان إلكتروني على االنترنت: يرجى متابعة القراءة في‬ http://ts.fujitsu.com ‫صفحة‬ ‫ وكذلك توصيفات وعناوين المواد األخرى، مثل: "أسطوانة‬DVD ‫ وأسطوانات‬CD ‫أسماء أسطوانات‬ "‫ الخاصة ببرامج التشغيل وأدوات المساعدة" أو كتيب "السالمة‬CD/DVD F10 :‫يميز...
  • Page 82 ‫المنافذ وعناصراالستعمال‬ ‫في هذا الفصل تتعرف على مختلف المكونات الصلبة الموجودة في الجهاز الخاص بك. وتحصل على عرض عام بشأن المبينات والمنافذ الموجودة‬ ‫= أزرار لوحة اللمس‬ ‫= موضع تركيب بطاقات الذاكرة‬ ٣ - ‫العربية‬ ‫المنافذ وعناصراالستعمال‬ .‫بالجهاز. احرص على أن تكون على دارية ومعرفة بهذه العناصر، قبل البدء في استخدام الجهاز‬ ‫= لوحة...
  • Page 83 ‫= منفذ سماعة الرأس‬ ‫= وحدة التشغيل الضوئية‬ (DC IN) ‫= مقبس التيار المستمر‬ 1 ‫, اإلصدار‬A26391-K317-Z320-1-8N19 USB ‫= منفذ‬ ‫= منفذ ميكروفون‬ ‫المنافذ وعناصراالستعمال‬ VGA ‫= منفذ شاشة‬ LAN ‫= منفذ‬ USB ‫= منفذ‬ ‫الجانب األيمن‬ USB ‫= منفذ‬ ‫= تجهيزة...
  • Page 84 ‫المنافذ وعناصراالستعمال‬ ‫= تجهيزة قفل كينسينجتون‬ ٥ - ‫العربية‬ ‫= درج البطارية‬ ‫= درج خدمة وحدة الذاكرة‬ ‫= درج خدمة القرص الصلب‬ 1 ‫, اإلصدار‬A26391-K317-Z320-1-8N19...
  • Page 85 ‫إرشادات هامة‬ ‫إرشادات هامة‬ ‫تجد في هذا الفصل إرشادات السالمة التي يجب عليك مراعاة عند التعامل مع كمبيوترك المحمول. كما أن اإلرشادات األخرى‬ .‫تزودك بمعلومات مفيدة حول كمبيوترك المحمول‬ ‫إرشادات السالمة‬ .‫احرص على مراعاة إرشادات السالمة الواردة في كتيب السالمة وقم باتباع هذه اإلرشادات وااللتزام بها‬ .‫احرص...
  • Page 86 ‫إرشادات هامة‬ .٢٤ ‫"استخدام وظائف توفير الطاقة" صفحة‬ ‫لدواعي حماية البيانات قم بإيقاف المكونات الالسلكية. عند نقل البيانات عن طريق وصلة السلكية قد يتسلمها شخص ثالث غير مصرح له‬ .‫تجد إرشادات حول تفعيل عملية تشفير البيانات في المستندات الخاصة بالمكونات الالسلكية‬ .‫إذا...
  • Page 87 ‫إرشادات هامة‬ ‫تنظيف الكمبيوتر المحمول‬ .‫ال يجوز تنظيف الحيز الداخلي للجسم إال عن طريق الخبراء الفنيين المعتمدين‬ ‫استخدم مواد التنظيف الخاصة بالكمبيوتر فقط. يمكن أن تتسبب المنظفات المنزلية العادية أو مواد التلميع في تعرض الكتابة‬ .‫الموجود على أزرار الكمبيوتر المحمول أو الطالء أو الكمبيوتر المحمول نفسه للضرر‬ .‫احرص...
  • Page 88 ‫تشغيل جهازك ألول مرة‬ ‫، فإن الجهاز يكون قد تم تجهيزه مسبقا بالبرامج الضرورية للتحكم في المكونات‬Windows ‫إذا كان جهازك مزودا بنظام تشغيل‬ ‫"توصيل مهايئ التيار‬ ‫قبل التشغيل ألول مرة قم بتوصيل الجهاز بالجهد الكهربائي عن طريق مهايئ التيار الكهربائي، انظر‬ .‫يجب...
  • Page 89 ‫قبل أن تقوم بنصب كمبيوترك المحمول، فينبغي عليك أن تختار مكان مناسب له. احرص أثناء ذلك على مراعاة اإلرشادات‬ .‫ال تقم أبدا بوضع الجهاز أو المهايئ على قاعدة حساسة للسخونة. وإال فقد ينتج عن ذلك تعرض القاعدة للضرر‬ ‫ال تضع أبدا الجهاز على سطح رخو )مثال سجادة، تنجيد، سرير(. فمن خالل ذلك قد تتعذر التهوية ويمكن أن تنشأ أضرار‬ ‫فأثناء...
  • Page 90 .‫اتبع اإلرشادات التي تظهر على الشاشة أثناء عملية التثبيت‬ ◄ ‫ مثبتا على جهازك، فسوف تجد المزيد من المعلومات حول نظام التشغيل وكذلك برامج‬Windows ‫إذا كان نظام التشغيل‬ .http://ts.fujitsu.com/support ‫التشغيل وبرامج المساعدة والترقيات والكتيبات وخالفه على جهازك أو على موقع اإلنترنت‬ ١١ - ‫العربية‬ 1 ‫, اإلصدار‬A26391-K317-Z320-1-8N19...
  • Page 91 ‫العمل باستخدام الكمبيوتر المحمول‬ ‫العمل باستخدام الكمبيوتر المحمول‬ ‫شرحا لكيفية‬ ٣٢ ‫"توصيل جهاز خارجي" صفحة‬ ‫يتضمن هذا الفصل شرحا لقواعد استعمال الكمبيوتر المحمول الخاص بك. يتضمن فصل‬ .‫توصيل أجهزة خارجية )مثل فأرة أو طابعة( بجهاز الكمبيوتر المحمول الخاص بك‬ .٦ ‫"إرشادات هامة" صفحة‬ ‫احرص...
  • Page 92 ‫العمل باستخدام الكمبيوتر المحمول‬ .‫المبين يومض باللون البرتقالي: هناك خطأ. ال يمكن شحن البطارية‬ ‫المبين مطفأ: النظام يتواجد في وضع تشغيل البطارية ولم يتم توصيل مهايئ الشبكة أو البطارية غير‬ .(CD/DVD ‫المبين يضيء: يتم الدخول إلى وحدة تشغيل )مثال قرص صلب، أسطوانات‬ ‫...
  • Page 93 ‫احفظ البيانات الخاصة بك وأغلق جميع التطبيقات‬ .‫قبل إيقاف جهازك. وإال فقد تتعرض لفقدان البيانات‬ ‫قم بإنهاء نظام التشغيل بطريقة صحيحة )مثال في نظام التشغيل‬ Start ‫ )ابدأ( عن طريق الوظيفة‬Start ‫ في القائمة‬Windows .((‫ – )ابدأ - إيقاف - موافق‬Turn Off – OK ،‫إذا...
  • Page 94 ‫العمل باستخدام الكمبيوتر المحمول‬ .‫يقوم زر اإلدخال بإنهاء سطر األوامر. إذا قمت بالضغط على زر اإلدخال، يتم تنفيذ األمر المعني المدخل‬ ‫بالضغط على زر كتابة األحرف الكبيرة يتم تفعيل وضع الكتابة باألحرف الكبيرة، وتظهر أيقونة بهذا المعنى‬ ‫. في وضع الكتابة باألحرف الكبيرة تظهر جميع األحرف المكتوبة كبيرة، أما‬Windows ‫في نطاق معلومات‬ ‫عند...
  • Page 95 ‫العمل باستخدام الكمبيوتر المحمول‬ ‫الشرح‬ ‫الزر‬ ‫أزرار المؤشر‬ .‫تعمل أزرار المؤشر على تحريك المؤشر تبعا التجاه السهم، إلى أعلى أو إلى أسفل أو إلى اليمين أو إلى اليسار‬ Start ‫ابدأ‬ .Windows‫يعمل ابدأ على استدعاء قائمة البداية الخاصة بال‬ ‫زر القائمة‬ .‫يقوم...
  • Page 96 ‫العمل باستخدام الكمبيوتر المحمول‬ .‫وفي الوقت نفسه اضغط على الزر أو األزرار الضرورية لتشغيل الوظيفة المطلوبة‬ ◄ ‫الشرح‬ ‫مجموعة األزرار‬ ‫إيقاف/تشغيل السماعات‬ .‫باستخدام هذه المجموعة يمكنك إيقاف وتشغيل سماعات الكمبيوتر المحمول‬ ‫تشغيل/إيقاف لوحة اللمس والزرين الخاصين بها‬ .‫باستخدام مجموعة األزرار هذه يمكن إيقاف أو تشغيل لوحة اللمس والزرين الخاصين بها‬ ‫تشغيل/إيقاف...
  • Page 97 ‫العمل باستخدام الكمبيوتر المحمول‬ ‫الشرح‬ ‫مجموعة األزرار‬ ‫التنقل بين التطبيقات المفتوحة‬ .‫باستخدام مجموعة األزرار هذه يمكن التنقل بين عدة تطبيقات مفتوحة في الجهاز‬ ‫مدير المهام‬Windows/ ‫أمان‬ .‫مدير المهام‬Windows/ ‫مجموعة األزرار هذه تبدأ وظيفة أمان‬ .‫إذا كان الجهاز مقفالً، فإنه يتم فتح نافذة إلدخال كلمة المرور‬ Tab ‫التنقل...
  • Page 98 .١٦ ‫"مجموعات األزرار" صفحة‬ ‫ عالية الجودة. وألسباب‬TFT ‫ يتم تركيب شاشات‬Fujitsu Technology Solutions GmbH ‫في الكمبيوترات المحمولة التي تنتجها شركة‬ ‫ فإنه يتم إنتاج هذه الشاشات الستخدامها بدرجة وضوح معينة. وال يمكن الحصول على صورة‬TFT ‫متعلقة بالتقنيات المستخدمة إلنتاج شاشات‬...
  • Page 99 ‫مضيئ و 2 بيكسل مظلم باإلضافة إلى 5 بيكسالت فرعية مضيئة أو 01 بيكسالت فرعية مظلمة أو مزيج من ذلك )واحد بيكسل فرعي مضيء‬ ‫البيكسل يتكون من ثالثة بيكسالت فرعية في العادة أحمر وأخضر وأزرق. يُعد البيكسل‬ .‫هو أصغر عنصر يمكن أن يقوم بأداء الوظيفية الكاملة للشاشة‬ ‫يُعد...
  • Page 100 ‫في حالة عدم استخدام البطاريات القابلة إلعادة الشحن لفترة طويلة، قم بفكها من الكمبيوتر المحمول. ال تقم بتخزين البطارية‬ .‫القابلة إلعادة الشحن في الجهاز‬ ‫فك وتركيب البطارية‬ .Fujitsu Technology Solutions ‫ال تستخدم إال البطاريات المخصصة لجهازك والتي صرحت بها شركة‬ .‫ال تستخدم القوة عند فك وتركيب البطارية‬ .‫احرص على عدم وصول أية أجسام غريبة إلى داخل وصالت البطارية‬...
  • Page 101 ‫، ولذلك ال يجوز‬IEC 825 1:1993: LASER KLASSE 1 ‫هذه الوحدة تشتمل على ضوء منبعث من الدايود، بتصنيف‬ ‫احفظ وسائط البيانات دائما في العلب المخصصة لها. حيث يمكنك من خالل ذلك تجنب تعرض وسيط البيانات لألتربة أو الخدوش أو‬ 1 ‫, اإلصدار‬A26391-K317-Z320-1-8N19 .‫قم...
  • Page 102 ‫العمل باستخدام الكمبيوتر المحمول‬ ‫ عندما يتم إدخال وسيط البيانات. وينطفئ المبين عندما تكون وحدة التشغيل جاهزة للقراءة. ويضيء المبين‬CD/DVD ‫يومض مبين أسطوانات‬ .‫عندما يتم الوصول إلى وحدة التشغيل. طالما المبين يضيء، فال يجوز بأي حال من األحوال إخراج وسيط البيانات‬ ‫...
  • Page 103 .‫قم بإطفاء الكمبيوتر المحمول‬ ‫اضغط باستخدام سن قلم أو سلك رفيع )مثال مشبك ورق( بقوة‬ ‫فينفتح درج وحدة التشغيل للخارج. يمكنك اآلن سحب الدرج‬ .‫)2( إلى خارج وحدة التشغيل‬ ‫عندما تقوم باستخدام وظائف توفير الطاقة المتاحة، فإن الكمبيوتر المحمول يستهلك معدل أقل من الطاقة. ومن خالل ذلك يمكنك تشغيل البطارية‬ ‫تزداد...
  • Page 104 ‫العمل باستخدام الكمبيوتر المحمول‬ .‫أخرج من وضع توفير الطاقة، إن كان مشغال، عن طريق تحريك الفأرة أو الضغط على المفاتيح أو تشغيل الكمبيوتر المحمول‬ ‫قم بإدخال بطاقة الذاكرة بحرص في موضع التركيب. يجب أن‬ ‫يشير مجال الكتابة إلى أعلى. ال تقم بالضغط عليها بقوة، وإال‬ ‫فقد...
  • Page 105 ‫ الالسلكية / تقنية بلوتوث‬LAN ‫المكونات الالسلكية بشبكة‬ ‫ يجعل التراخيص الممنوحة لهذا‬Fujitsu Technology Solutions ‫تركيب مكونات السلكية غير مصرح بها من شركة‬ LAN ‫ وكذلك عنصر اإلرسال بشبكة‬UMTS ‫إذا قمت بإيقاف المكونات الالسلكية، فإنه يتم إيقاف وحدة بلوتوث ووحدة شبكة‬...
  • Page 106 ‫العمل باستخدام الكمبيوتر المحمول‬ .‫ في المستندات الخاصة بنظام التشغيل‬WLAN ‫تجد المعلومات حول إعدادات الدخول لشبكة‬ LAN = Local) ‫. وبذلك يمكنك عمل اتصال مع شبكة كمبيوتر محلية‬Ethernet-LAN ‫وحدة الشبكة الداخلية بكمبيوترك المحمول تدعم شبكة‬ ‫ الموجود بالكمبيوتر‬LAN ‫قم بتوصيل كابل الشبكة بمنفذ‬ .(2) ‫قم...
  • Page 107: Bios Setup Utility

    .‫كمبيوترك المحمول يحتوي على عدة وظائف لألمان يمكنك بها حماية نظامك وبياناتك الشخصية لمنع قيام أشخاص غير مصرح لهم من استخدامها‬ .‫تذكر أنك في بعض المواقف - مثال إذا نسيت كلمة السر الخاصة بك - أنك أنت نفسك لن تتمكن أيضا من الوصول إلى بياناتك‬ ‫قم...
  • Page 108 ‫وظائف األمان‬ ‫سواء باستخدام كلمة سر مدير النظام أو أيضا بكلمة سر المستخدم فإنك بهذا تحول دون قيام أشخاص غير مصرح لهم باستخدام برنامج المساعدة‬ ‫، ومن خالل كلمة سر‬BIOS ‫ ‏. من خالل كلمة سر مدير النظام يمكنك التعامل مع جميع وظائف برنامج المساعدة في إعداد‬B IOS ‫في إعداد‬ .‫المستخدم...
  • Page 109 ‫ »برنامج المساعدة في إعداد‬BIOS Setup Utility ‫عن طريق كلمة سر مدير النظام التي قمت بتخصيصها في برنامج‬ .‫يمكنك أيضا منع بدء تشغيل النظام‬ ‫ )كل تشغيل(( ثم قم بالضغط على زر‬Every Boot (‫ )أول تشغيل‬First Boot ‫ )تعطيل( أو‬Disabled) ‫اختر الخيار المرغوب‬ .‫إعادة...
  • Page 110 ‫وظائف األمان‬ .‫ )تأكيد كلمة المرور الجديدة( سوف يُطلب منك تأكيد كلمة المرور‬Confirm new Password ‫عن طريق البند‬ ‫ )مالحظة اإلعداد: تم حفظ التغييرات( تحصل على تأكيد بأن‬Setup Notice: Changes have been saved ‫عن طريق البند‬ Set Master ‫ بتحديد خانة‬Drive1 ‫(، قم في نطاق‬Drive1) ‫عندما ترغب في تحديد كلمة المرور الخاصة بالقرص الصلب الثاني‬ ‫...
  • Page 111 ‫قبل القيام بتوصيل جهاز‬ ،٦ ‫"إرشادات هامة" صفحة‬ :‫التزم بالترتيب التالي شرحه، عندما تقوم بتوصيل جهاز خارجي بالكمبيوتر المحمول أو تقوم بفصله من الكمبيوتر المحمول‬ .‫، إيقاف الكمبيوتر المحمول والجهاز المعني قبل التوصيل أو الفصل‬USB ‫ليس من الضروري مع بعض األجهزة، مثل أجهزة‬ ‫تجد...
  • Page 112 ‫توصيل جهاز خارجي‬ "‫"مجموعات األزرار‬ ‫ الخاصة بالكمبيوتر المحمول، انظر فصل‬LCD ‫كما يمكنك أيضاً التحويل ما بين الشاشة الخارجية وشاشة‬ .‫ للكمبيوتر المحمول في وقت واحد‬LCD ‫وبذلك يمكنك إظهار نفس الصورة على الشاشة الخارجية وشاشة‬ ‫ أو طابعة أو ماسح ضوئي‬DVD ‫ )مثل وحدة تشغيل أسطوانات‬USB ‫ توصيل أجهزة خارجية مزودة بوصلة‬USB ‫يمكنك باستخدام وصالت‬ ‫("دون...
  • Page 113 ‫ أو‬MP3 ‫ أو مشغل‬MiniDisc ‫عن طريق مقبس الميكروفون/مقبس جهاز الصوتيات يمكنك توصيل ميكروفون خارجي أو مشغل أسطوانات‬ .‫قم بتوصيل كابل الصوتيات بالجهاز الخارجي‬ Line ‫قم بتوصيل كابل الصوتيات في مقبس الميكروفون/مقبس‬ .‫ بالكمبيوتر المحمول‬In .‫قم بتوصيل كابل الصوتيات بالجهاز الخارجي‬ ‫قم...
  • Page 114 ‫فك وتركيب المكونات في حالة الخدمة‬ ‫ال يجوز القيام بأعمال اإلصالحات على الكمبيوتر المحمول إال عن طريق الخبراء الفنيين المعتمدين. يؤدي الفتح غير المصرح‬ ‫به أو أعمال اإلصالحات التي تُجرى بطريقة غير سليمة إلى إلغاء الضمان وقد تُعرض المستخدم ألخطار بالغة )صدمة‬ .‫يمكنك...
  • Page 115 :‫إذا طلب منك مكتب الخط الساخن/الخدمة أن تقوم بنفسك بفك وتركيب الذاكرة اإلضافية، فاتبع الخطوات التالية‬ ‫أثناء تركيب/فك وحدات الذاكرة يجب أن تكون البطارية مفكوكة من الكمبيوتر المحمول، كما أنه ال يجوز بأي حال من األحوال‬ .٣٥ ‫"تحضير فك المكونات" صفحة‬ .٥٢...
  • Page 116 ‫فك وتركيب المكونات في حالة الخدمة‬ .(1) ‫اضغط مشبكي التثبيت بحرص للخارج‬ .(2) ‫تتحرك وحدة الذاكرة إلى أعلى‬ .(3) ‫اجذب وحدة الذاكرة في اتجاه السهم من موضع التركيب‬ ‫أدخل وحدة الذاكرة في مكان تركيبها )1( بحيث تبدأ بأطراف‬ .‫( أوال‬a) ‫التالمس والتجويف‬ ‫حرك...
  • Page 117 ‫فك وتركيب المكونات في حالة الخدمة‬ ‫تثبيت الغطاء‬ .‫ضع الغطاء في اتجاه السهم )1( على موضع التركيب‬ ◄ .(2) ‫قم بتثبيت الغطاء بواسطة المسامير‬ ◄ ‫فك وتركيب القرص الصلب‬ ‫اخلع الغطاء‬ .٢١ ‫"فك البطارية" صفحة‬ ‫قم بفك البطارية، انظر فصل‬ ◄...
  • Page 118 ‫فك وتركيب المكونات في حالة الخدمة‬ ‫احرص على حفظ المسامير في موضع آمن. في حالة قيامك بفك العديد من األجزاء في نفس الوقت، فاحرص على حفظ المسامير‬ .‫الخاصة بكل جزء على حدة في موضع منفصل. إذا قمت بتركيب مسامير خاطئة فقد تتعرض األجزاء لحدوث أضرار‬ ٣٩...
  • Page 119 ‫احرص على حفظ المسامير في موضع آمن. في حالة قيامك بفك العديد من األجزاء في نفس الوقت، فاحرص على حفظ المسامير‬ .‫الخاصة بكل جزء على حدة في موضع منفصل. إذا قمت بتركيب مسامير خاطئة فقد تتعرض األجزاء لحدوث أضرار‬ .‫قم بسحب القرص الصلب من عند طرف الجذب في اتجاه السهم )2(، إلى أن يتم فك المالمسات‬ ‫في...
  • Page 120 ‫فك وتركيب المكونات في حالة الخدمة‬ ‫في حالة قيامك بفك العديد من األجزاء في نفس الوقت، فاحرص على حفظ المسامير الخاصة بكل جزء على حدة في موضع‬ ‫منفصل واحرص على مراعاة أن يتم استخدام المسامير الصحية. إذا قمت بتركيب مسامير خاطئة فقد تتعرض األجزاء لحدوث‬ ٤١...
  • Page 121 ‫فك وتركيب المكونات في حالة الخدمة‬ .(1) ‫قم بخلع المسامير‬ ◄ .‫فيتم تحرير قفل وحدة التشغيل‬ .(2) ‫قم بإخراج وحدة التشغيل من فتحة وحدة التشغيل‬ ◄ ‫تركيب وحدة التشغيل الضوئية‬ .(1) ‫قم بإدخال وحدة التشغيل في الكمبيوتر المحمول‬ ◄ .(2) ‫قم بتثبيت المسامير‬ ◄...
  • Page 122 ‫فك وتركيب المكونات في حالة الخدمة‬ :ً‫في حالة قيامك بفك أو تغيير مكونات النظام المرغوبة، فاحرص على تحضير جهازك إلعادة التشغيل كما هو مشروح الحقا‬ ٤٣ - ‫العربية‬ ‫إتمام عملية فك المكونات‬ .٢٢ ‫"تركيب البطارية" صفحة‬ ‫قم بإعادة تركيب البطارية مرة أخرى، انظر‬ .‫ضع...
  • Page 123 BIOS-Setup-Utility ‫اإلعدادات في برنامج‬ .‫ يمكن ضبط إعدادات النظام وتهيئة األجهزة والمكونات الموجودة بالكمبيوتر المحمول‬BIOS-Setup-Utility ‫عن طريق برنامج‬ ‫. تصبح‬BIOS-Setup-Utility ‫عند تسليم الكمبيوتر المحمول تكون اإلعدادات القياسية مفعلة. يمكنك تغيير اإلعدادات في قوائم برنامج‬ ‫تهئية أجزاء المكونات الصلبة المختلفة مثل الفأرة ولوحة المفاتيح والمعالج‬ «‫...
  • Page 124: Exit Discarding Changes

    BIOS-Setup-Utility ‫اإلعدادات في برنامج‬ BIOS ‫ - حفظ التغييرات وإنهاء برنامج المساعدة في إعدادات‬Exit Saving Changes ‫(، اختر‬BIOS ‫ )برنامج المساعدة في إعدا ¯ات‬BIOS-Setup-Utility ‫حتى يمكن تخزين المدخالت الحالية في القوائم وإنهاء برنامج‬ ‫ – إلغاء التغييرات وإنهاء برنامج المساعدة في إعداد‬Exit Discarding Changes .(‫...
  • Page 125 ‫ثالثية األبعاد انخفاض طفيف في الكفاءة الوظيفة مقارنة بالكمبيوتر الشخصي المكتبي. قد تؤدي عملية تحديث برامج التشغيل‬ ‫ في بعض األحوال إلى حدوث تدهور في األداء وفقدان‬Fujitsu Technology Solutions ‫التي لم تصرح بها شركة‬ http://ts.fujit- :‫ من موقع اإلنترنت‬BIOS ‫البيانات وأخطاء وظيفية. يمكنك تنزيل برامج التشغيل واإلصدارات الحالية لنظام‬...
  • Page 126 ‫حلول المشاكل ونصائح‬ ‫أثناء عملية إعادة التثبيت يتم محو جميع البيانات الشخصية والبرامج التي تم تثبيتها على الجهاز من قبل. ولذلك يلزم عمل نسخ‬ .‫، قبل القيام بدء عملية التثبيت من جديد‬CD/DVD ‫احتياطية من جميع الملفات على قرص صلب خارجي أو أسطوانة‬ ‫بعد...
  • Page 127 .‫في هذه الحالة يرجى االتصال بمركز البيع التابع لك أو االتصال بمكتب الخط الساخن/الخدمة الخاصة بنا‬ ‫عند إدخال عالمة محددة على لوحة المفاتيح فإنه يتم كتابة األرقام فقط‬ . Num ‫اضغط على الزر‬ .‫اضغط على أحد األزرار أو قم بلمس لوحة اللمس‬ ،‫اضغط...
  • Page 128 ‫حلول المشاكل ونصائح‬ ‫ عن‬Windows ‫قم بإنهاء البرنامج المستخدم في نظام التشغيل‬ ‫ . في حالة استمرار ظهور الخطأ بعد إنهاء‬F4 + Alt ‫طريق‬ ‫البرنامج، فاستخدم مجموعة األزرار لتغيير الشاشة المشغلة )انظر‬ LCD ‫لتحويل إلى شاشة‬ ،(١٦ ‫"مجموعات األزرار" صفحة‬ :‫الخاصة...
  • Page 129 ‫تحقق من أن كابل نقل البيانات بين الكمبيوتر المحمول والطابعة‬ ‫تحقق من أن البرنامج الصحيح لتشغيل الطابعة يتم تحميله )انظر‬ .(‫األوراق المرفقة مع الطابعة‬ ‫قم بتشغيل المكونات الالسلكية )انظر‬ .(٢٦ ‫"تشغيل وإيقاف المكونات الالسلكية" صفحة‬ ‫قم بمراجعة عما إذا كان االتصال الالسلكي مشغل عن طريق‬ ‫تجد...
  • Page 130 ‫حلول المشاكل ونصائح‬ .‫قم باالتصال بمركز البيع التابع لك أو مركز الخدمة الخاص بنا‬ .‫قم بإيقاف الكمبيوتر المحمول‬ .‫قم بتشغيل الكمبيوتر المحمول‬ BIOS- ‫ ، للوصول إلى برنامج‬F2 ‫اضغط على الزر الوظيفي‬ .(BIOS ‫ )إعدادات‬Setup Exit ‫( القائمة‬BIOS ‫ )إعدادات‬BIOS-Setup ‫اختر في‬ ‫...
  • Page 131 ‫ ‏ 4,53 مم‬x ‫ ‏ 542 مم‬x ‫043 مم‬ ‫تقدم نشرة البيانات الخاصة بالجهاز المزيد من المواصفات الفنية. تجد نشرة البيانات على جهازك أو على موقع اإلنترنت‬ .http://ts.fujitsu.com/support ‫تجد المعلومات المتعلقة بالبطاريات المستخدمة في جهازك على الموقع اإللكتروني‬ (‫0044 مللي أمبير/ساعة )84 واط/ساعة‬...
  • Page 132 (Declarations of Conformity) ‫بيانات المطابقة‬ .http://ts.fujitsu.com/ce ‫( الخاصة بالجهاز تجدها على موقع اإلنترنت‬Declarations of Conformity) ‫بيانات المطابقة‬ ‫ بأن جهازك يتطابق مع المتطلبات األساسية واللوائح األخرى المتعلقة بالمواصفة‬Fujitsu Technology Solutions ‫بموجب هذا تقر شركة‬ .(‫(، )فيينا‬BMWi) ‫/5/999 1 ‏‬EC ٥٣ - ‫العربية‬...
  • Page 133: Notice To Users Of Radios And Television

    Fujitsu Technology Solutions GmbH recommends not to bring this ‫المعلومات التنظيمية ألجهزة الكمبيوتر المحمول غير المزودة بجهاز الراديو‬ Changes or modifications not expressly approved by Fujitsu Technology Solutions could void this These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 134 ‫إرشادات الجهة الصانعة‬ Your notebook may be supplied with an internal modem which complies with Part 68 of the FCC rules. On this notebook is a label that contains the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment among other information. If requested, the user must provide their The equipment requires a standard modular jack type USOC RJ-11C which is FCC Part 68 com- This equipment is designed to be connected to the telephone network or premises wiring using a standard modular jack type USOC RJ-11C which is FCC Part 68 compliant and a line cord between...
  • Page 135 Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the The Ringer Equivalence Number (REN) for this terminal equipment is 0.0.
  • Page 136 ‫إرشادات الجهة الصانعة‬ interface téléphonique. La terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les Pour assurer la sécurité, les utilisateurs doivent vérifier que la prise de terre du service d’électricité, les lignes télphoniques et les conduites d’eau métalliques sont connectées ensemble.
  • Page 137 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference Connect the equipment to an outlet on a circuit different from the one the receiver is connected .Please note the following regulatory information related to the optional radio device This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF...
  • Page 138 ‫إرشادات الجهة الصانعة‬ 2) this device must accept any interference received, including interference that may cause undesirable) .operation Modifications not expressly authorized by Fujitsu Technology Solutions may invalidate the user's right .to operate this equipment ٥٩ - ‫العربية‬ 1 ‫, اإلصدار‬A26391-K317-Z320-1-8N19...

Table of Contents