Page 1
OWNER'S MANUAL LG CLOUD V SERIES BOX Please read the safety information carefully before using the product. LG Cloud V Series Box Model List CBV42 www.lg.com...
Table of Contents ASSEMBLING AND PREPARING Unpacking Parts and Buttons Product Installation - Using in Horizontal Position - Using in Vertical Position - Mounting on the Back of the Monitor CONNECTING LAN/ PERIPHERALS - LAN Connection - DVI Connection - Extended Monitor Connection - Peripheral device connection TROUBLESHOOTING SPECIFICATIONS Power Indicator USING CLOUD SOLUTION...
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here. Owner's Manual/Card Power Cord AC/DC Adapter Four Screws Main Unit Stand Base Mount Bracket CAUTION Only use an approved LG power adapter. Damage caused by other power adapters is not covered by warranty. NOTE Note that the components may look different from those shown here. Without prior notice, all information and specifications in this manual are subject to change to improve the performance of the product. To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product.
ASSEMBLING AND PREPARING Parts and Buttons Power Indicator & Power Button On: Power On Off: Power Off Front Side DC-IN DVI-D OUT DVI-I OUT Rear Side 0.1A DC-IN DVI-D OUT DVI-I OUT 0.1A Input Connectors...
ASSEMBLING AND PREPARING Product Installation Mounting on the Back of the Monitor Using in Horizontal Position Fix the mount bracket on the back of the monitor with 4 screws as illustrated below. NOTE DC-IN If this product is used with upside down, it DVI-D OUT DVI-I OUT may not work properly. 0.1A Use the product with the Kensington lock facing upward. Using in Vertical Position Firmly attach the stand on the bottom of the product as illustrated below. Using a coin, turn the screw clockwise to secure the stand base. Put the product on the two latches as illustrated below. Assemble the product by aligning the below two holes out of 4 holes on the product.
Connecting LAN/Peripherals CONNECTING LAN/PERIPHERALS LAN Connection DVI Connection Connect the router or switch to the monitor using a Transmits digital video signals to the monitor. Con- LAN cable as illustrated below. nect the product using the DVI cable as illustrated below. CAUTION NOTE Connect the input signal cable The LAN cable is sold separately. and turn in the direction of the The following LAN cable type can be used: arrow. To prevent disconnection Standard: IEEE 802.3 ETHERNET secure the cable tightly. Connect the LAN cable and the peripheral de- vices to use the CITRIX cloud monitor. NOTE When connecting the power cord to the outlet, use a grounded (3-hole) multi-socket or a grounded power outlet. DVI cable is not included in the basic com- ponents. Use the DVI cable provided with the monitor or the standard DVI cable.
Connecting LAN/Peripherals Extended Monitor Connection Peripheral device connection Transmits digital video signals to the monitor. Con- Connect peripheral devices to the monitor using nect the product using the DVI cable as illustrated USB, microphone and headphone ports. below. Front Side Rear Side NOTE If the main/sub screen was changed after extended monitor was connected, the main/ sub can be changed in Setup.
Page 8
Connecting LAN/Peripherals NOTE Peripheral devices are sold separately. The USB ports can be used to connect the keyboard, mouse, and other USB devices. For an angle plug earphone/microphone, it is difficult connect it with a peripheral device, so use a straight type. Angle Type Straight Type NOTE The cloud server settings may affect the perfor- mance of the headphones, earphones or speak- ers depending on the connected cloud server. The cloud server settings may affect the functions or speed of the specific USB stor- age device depending on the connected cloud server.
TROUBLESHOOTING TROUBLESHOOTING Nothing is displayed on the screen Is the power adapter of the Box y Check if the power cord is correctly plugged in to the power outlet. plugged in ? Is the power indicator on? y Check the power indicator. Is the power indicator displaying as y Adjust the brightness and the contrast of the connected monitor. red? y Check whether the monitor and the Box are properly connected to DVI Are the BOX and the monitor con- nected with the signal cable? cable or D-SUB cable (using DVI to D-Sub gender). NOTE This box type product is used by connecting the monitor. If the monitor does not work normally, the screen may not be displayed correctly.
Recommended Resolution 1920 x 1200 @ 60 Hz (DVI-I, DVI-D) Power Voltage 19 V 1.2 A Power consumption (Typ.) Cloud Mode 6 W (Cloud) Off Mode ≤ 0.5 W Dimension Dimensions (Width x Height x Depth) With stand 70.3 mm x 189.3 mm x 143.6 mm Without Stand 185 mm x 30.5 mm x 143.6 mm Weight (Without 0.65 kg Packaging) AC/DC adapter Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC Or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd Output: 19 V 1.3 A Environmental Operating Condition Temperature: 10°C to 35°C; Humidity: 10% to 80% Conditions Storing Condition Temperature: -20°C to 60°C; Humidity: 5% to 90% The specifications are subject to change without notice. Power Indicator Mode LED Color On Mode Off Mode...
Using CLOUD Solution USING CLOUD SOLUTION NOTE Menus and functions in CLOUD mode may be slightly different depending on the firm- ware version.You can download the user manual for each version from the Teradici homepage: http://www.teradici.com To check the firmware version, see page <47>. Connect Screen The Connect screen is shown during start-up, except when the portal has been configured for a If the network is connected and IP is being ac- managed start-up or auto-reconnect. The logo dis- quired, the message "Network connection detect- played above the Connect button can be changed ed. Acquiring IP address …" is displayed on the by uploading a replacement image via the admin Connection screen. Figure 2-3 shows the message interface. displayed when the network is ready and the IP is being acquired. If the network is not properly connected (e.g., dur- The below is the Connection screen displayed ing portal boot up), or connection is being created, when network is completely ready. the "Network connection lost. Waiting for connec- tion …" message is displayed on the Connection screen. Figure 2-2 shows the message displayed when the network is not ready.
Page 12
Using CLOUD Solution If you select the Connect button, the connection Configuration Window session is started. When the connection is pend- In the Configuration window, the administrator can ing, the "Discovering hosts, please wait…" mes- access the window tabs that contain the settings to sage is displayed on the OSD local GUI.When the configure and manage the portal environment. connection is established, the OSD local GUI will The Configuration window has the following tabs: disappear and be replaced by the session image. y Network y Label y Connection Management y Discovery y Session y RDP y Language y OSD y Reset y Display y VMware View Each tab contains OK, Cancel and Apply buttons ...
Page 13
Using CLOUD Solution Network Tab y Gateway The Network tab allows the administrator to config- The Gateway field contains the gateway IP ad- ure the portal network parameters. dress of the device. If DHCP is disabled, this field is required. If DHCP is enabled, this field cannot be edited. NOTE The network parameters can also be con- y Primary DNS Server figured using the Webpage Administration The Primary DNS Server field contains the primary Interface. DNS IP address of the device. This field is option- al. If DHCP is enabled, this field cannot be edited. y Secondary DNS Server The Secondary DNS Server field contains the sec- ondary DNS IP address of the device. This field is optional. If the DHCP is enabled, this field cannot be edited. y Domain Name The Domain Name field contains the domain name used, e.g. "domain local". This field is optional. It speci- fies on which domain the host or portal operates. y FQDN The FQDN field represents the Fully Qualified Do- main Name of the host or portal. The default value is PCoIP-host-MAC or PCoIP-portal-MAC, where MAC...
Page 14
Using CLOUD Solution Tab y Secondary DNS Server The IPv6 tab is used when the portal is connected The Secondary DNS Server field contains the sec- to the network configured with the IP v6. ondary DNS IP address of the device. This field is optional. If DHCPv6 is enabled, this field cannot beedited. y Domain Name The Domain Name field contains the domain name used, e.g. "domain local". This field is optional. It specifies on which domain the host or portal oper- ates. y FQDN The FQDN field represents the Fully Qualified Do- main Name of the host or portal. The default value is PCoIP-host-MAC or PCoIP-portal-MAC, where MAC is the MAC address of the host or portal. If there is a domain name, it will be added to the FQDN in the format of PCoIP-host-MAC.domain. local. y Enable SLAAC Select the Enable SLAAC field to use the stateless auto-configuration of the device. y Enable IPv6 If you select Enable IPv6, the portal in use can be y Enable Manual Address connected to the network configured with the IPv6.
Page 15
Using CLOUD Solution Discovery Tab Label Tab The Label tab allows the administrator or host to The Discovery tab allows the administrator to eas- add customized information to the portal. ily find a portal in the PCoIP system. NOTE NOTE The portal label parameters can also be con- The Discovery parameters can also be con- figured using the Webpage Administration figured using the Webpage Administration Interface. Interface. y PCoIP Device Name In the PCoIP Device Name field, the administrator y Enable Discovery can specify a logical name to the host or portal. If the Enable Discovery option is selected, a device The default value is PCoIP-host-MAC or PCoIP- will use SLP Discovery to dynamically locate the portal-MAC, where MAC is the MAC address of the peer device without requiring any information about host or portal. the location of the device in the network. This means that the configuration and maintenance y PCoIP Device Description work in a complicated system can be significantly In the PCoIP Device Description field, the administra- reduced.
Page 16
Using CLOUD Solution Session Tab See below for information how to set for each op- The Session tab allows the administrator to set the tion. method to connect the device to a peer device. NOTE The Session parameters can also be con- figured using the Webpage Administration Interface. y Direct to Host You can view the screen of the host PC by estab- lishing 1:1 connection between the PCI host card connected to the host PC through the entered IP address of the host PC and the portal. y DNS Name or IP Address Enter the DNS name or IP address of the host PC. y Connection Type The Connection Type field allows the user to select the device to be connected with the portal. The Connection Type field has following options: y Direct to Host y Direct to Host + SLP Host Discovery y View Connection Server y View Connection Server + Auto-Logon y View Connection Server + Kiosk...
Page 17
Using CLOUD Solution y Direct to Host + SLP Host Discovery You can view the screen of the host PC by discov- ering the host PC within the network and estab- lishing 1:1 connection between the PCI host card connected to the host PC and the portal. y Enable Auto-Reconnect If this option is selected, reconnection is attempted automatically when a session is disconnected or the user is logged off. NOTE This setting is provided only for the client. y Enable Peer Loss Overlay The "Connection Lost" message is displayed.The display is the same as in the VDI environ-ment. The default is Disable. NOTE This setting is provided only for the client. y Enable Preparing Desktop Overlay If this option is selected, the "Preparing Desk-top"...
Page 18
Using CLOUD Solution y View Connection Server In the Session tab, you can select to enable the user client to access the VMware View Connec- tionServer. To do this, select View Connection Server for Connection Type. y Enable Auto-Reconnect If this option is selected, reconnection is attempted automatically when a session is disconnected or the user is logged off. NOTE This setting is provided only for the client. y DNS Name or IP Address Enter the DNS name or IP address of the VM- ware View Connection Server. y Enable Peer Loss Overlay The "Connection Lost" message is displayed.The display is the same as in the VDI environ-ment. The default is Disable. NOTE This setting is provided only for the client. y Enable Preparing Desktop Overlay If this option is selected, the "Preparing Desk-top"...
Page 19
Using CLOUD Solution y Prefer GSC-IS If this option is selected, the GCS-IS interface is used when a smart card supports more than one interface. If the smart card supports only one interface, it is not used. NOTE This setting is provided only when a smart card is used. y Enable Peer Loss Overlay If this option is selected, the "Network Connection is confirmed that the network is disconnected. The display is the same as in the VDI environ- y Desktop Name to Select ment. The default is Disable. Enter the name of the pool/desktop which the user client uses upon starting a session. y Port NOTE For the default setting, leave the port field empty. When the VMware View Connection Server uses This setting is provided only for the client. the SSL authentication, enter 443 in the Port field.If the server where a user tries to access uses a port other than a general port, enter the port.
Page 20
Using CLOUD Solution y View Connection Server with Auto-Logon In the Session tab, you can select to enable the user client to automatically access the VMware View Connection Server.To do this, select View Connection Server with Auto-Logon for Connection Type. y Desktop Name to Select Enter the name of the pool/desktop which the user client uses upon starting a session. y Port For the default setting, leave the port field empty. When the VMware View Connection Server uses the SSL authentication, enter 443 in the Port field.If the server where a user tries to access uses a port y Auto Connect If this option is enabled, the selected VMware View y DNS Name or IP Address Connection Server is automatically connected Enter the DNS name or IP address of the VM- when the user client is powered on.
Page 21
Using CLOUD Solution y Prefer GSC-IS y View Connection Server + Kiosk If this option is selected, the GSC-IS interface Select View Connection Server + Kiosk to use is used when a smart card supports more than the kiosk mode. You can configure the View Con- one interface. If the smart card supports only one nection Server + Kiosk mode using the Webpage interface, it is not used. Administration Interface. NOTE NOTE This setting is provided only when a smart You cannot use the kiosk mode by connect- card is used. ing to the host PC. y Enable Peer Loss Overlay If this option is selected, the "Network Connection Lost" message is displayed on the screen when it is confirmed that the network is disconnected. The display is the same as in the VDI environ- ment. The default is Disable. NOTE This setting is provided only for the client. y Enable Preparing Desktop Overlay If this option is selected, the "Preparing Desk- top" message is displayed on the screen when the
Page 22
Using CLOUD Solution y Enable Preparing Desktop Overlay If this option is selected, the "Preparing Desk- top" message is displayed on the screen when the user is logged in. y Disconnect Message Filter This option determines the type of message to display when a session is disconnected. - Show All: Shows all the error messages. - Show Error and Warning Only: Shows the error and warning messages only. - Show Error Only: Shows the error messages only. - Show None: Shows nothing. y View Connection Server + Imprivata OneSign Connection sign Connection to use the Imprivata One- sign Connection for the client authentication. y Port For the default setting, leave the port field empty. When the VMware View Connection Server uses the SSL authentication, enter 443 in the Port field.
Page 23
Using CLOUD Solution y Enable Preparing Desktop Overlay If this option is selected, the "Preparing Desk- top" message is displayed on the screen when the user is logged in. y Disconnect Message Filter This option determines the type of message to display when a session is disconnected. - Show All: Shows all the error messages. - Show Error and Warning Only: Shows the error and warning messages only. - Show Error Only: Shows the error messages only. - Show None: Shows nothing. y Connection Management Interface In the Connection Management Interface setting, you can manage the connection by entering the IP ing the IP address of the VMware View Connection y Remember Username Server and can select to enable or disabled the If this option is selected, the username which is management interface. previously used to access the VMware View Connection Server is automatically entered in the username field.
Page 24
Using CLOUD Solution Language Tab The Language tab allows the administrator to set the OSD language. NOTE The Language parameters can also be con- figured using the Webpage Administration Interface. y Enable Peer Loss Overlay If this option is selected, the "Network Connection Lost" message is displayed on the screen when it is confirmed that the network is disconnected. The display is the same as in the VDI environ- ment. The default is Disable. NOTE This setting is provided only for the client. y Enable Preparing Desktop Overlay y Language If this option is selected, the "Preparing Desk- The Language field is used to set the display top" message is displayed on the screen when the language of the OSD and the user level event log user is logged in. messages. y Enable Event Log Notification y Keyboard Layout With this option, you can select whether to allow The Keyboard Layout field allows the administrator...
Page 25
Using CLOUD Solution OSD Tab Display Tab The OSD tab allows the administrator to modify the The Display tab allows the user to configure the On Screen Display (OSD) parameters. EDID function of the monitor. NOTE NOTE The OSD parameters can also be configured The Enable display override function can be using the Webpage Administration Interface. used when the EDID function of the monitor is not running. y Screen-Saver Timeout The Screen-Saver Timeout field allows the ad- ministrator to set a time limit for the screen saver. The time limit is defined in seconds. The maximum time is 9999 seconds. If it is set to 0 seconds, the screen saver will be turned off.
Page 26
Using CLOUD Solution Reset Tab Diagnostics Window The Reset tab allows the administrator to reset all In the Diagnostics window, the administrator can configurable parameters stored in Flash. access the window tab to diagnose the portal. The Diagnostics window has the following tabs: y Event Log NOTE y Session Statistics The Reset function can also be accessed y PCoIP Processor through the Webpage Administration Inter- y Ping face. Each tab has the Close button to close the window. Event Log Tab The Event Log tab allows the administrator to view and delete the event log messages from the portal. NOTE The event log (regardless of the quantity) can also be reset using the Webpage Admin- istration Interface. y Reset Parameters Pressing the Reset Parameters button will reset all settings and options to the factory default settings.
Page 27
Using CLOUD Solution Session Statistics Tab PCoIP Processor Tab The Session Statistics tab allows the administrator The PCoIP Processor tab allows the administrator to view the PCoIP specific statistics of the last ac- to view the portal PCoIP processor's uptime since tive PCoIP session from the portal. its last booting. NOTE NOTE The session statistics (regardless of the quantity) can also be viewed using the Web- The PCoIP Processor Uptime can also be page Administration Interface. viewed using the Webpage Administration Interface. y PCoIP Packets Statistics y PCoIP Packets Sent The PCoIP Packets Sent field shows the total number of PCoIP packets sent from the portal to the host in the last active session. y PCoIP Packets Received The PCoIP Packets Received field shows the total number of PCoIP packets received from the host to the portal in the last active session. y PCoIP Packets Lost The PCoIP Packets Lost field shows the total number of PCoIP packets lost in the last ac- tive session.
Page 28
Using CLOUD Solution Ping Tab The Ping tab allows the administrator to perform a ping test to the device and check if it can reach the overall IP network. This is useful to check whether the device can reach the host. NOTE The Ping tab has no corresponding menu in to the Webpage Administration Interface of Section 1. y VPD Information The Vital Product Data (VPD) is information that uniquely identifies each portal or host. y MAC Address The portal MAC address y Unique Identifier The portal ID y Serial Number The portal serial number y Firmware Part Number The part number of the PCoIP firmware y Hardware Version y Ping Settings The portal hardware version y Destination y Firmware Information The IP address or FQDN to perform the ping The Firmware Information shows the details of the...
Page 29
Using CLOUD Solution User Settings Window Mouse Tab In the User Settings window, the administrator can The Mouse tab allows the user to modify the OSD access the tab to select the mouse and keyboard and RDP session's mouse cursor speed setting. and define the PCoIP image quality. The User Settings window has the following tabs: y VMware View NOTE y Mouse y Keyboard The OSD mouse cursor speed setting does y Image not affect the mouse cursor settings when y Display Topology a PColP session is active unless the Local y Touch Screen Keyboard Host Driver function is being used (see PColP Host Software User Guide for more information). y VMware View Tab The Mouse tab has no corresponding menu The VMware View tab allows user to specify the in the Webpage Administration Interface of client behavior for when a user cannot check the Section 1.
Page 30
Using CLOUD Solution Keyboard Tab Image The Keyboard tab allows the user to modify the The Image tab allows a user to change the image OSD and RDP session's keyboard repeat setting. settings on the PCoIP system. NOTE NOTE The Image parameters can also be con- The OSD keyboard setting does not affect figured using the Webpage Administration the keyboard settings when a PColP session Interface. is active unless the Local Keyboard Host Driver function is being used (see PColP Host Software User Guide for more informa- tion). The Keyboard tab has no corresponding menu in the Webpage Administration Inter- face of Section 1. y Minimum Image Quality The Minimum Image Quality slider allows the ad- ministrator to make compromises between image quality and frame rate when network bandwidth is limited. Sometimes, lower-quality images at a higher frame rate may be required, while at other times, higher-quality images at a lower frame rate may be preferred. y Keyboard Repeat Delay In environments where the network bandwidth is The Keyboard Repeat Delay field allows the user limited, moving the slider towards Reduced en-...
Page 31
Using CLOUD Solution y Touch Screen Tab y Display Topology Tab The Touch Screen tab allows the user to specify The Display Topology tab allows the user to specify the touch sensitivity and alignment when the moni- the position and alignment of a connected second- tor supports the touch screen function. ary monitor. NOTE It is applicable when the VMware View Con- nection Server version is 4.5 or later. y Enable right click on hold If this option is selected, clicking and holding the touch screen for several seconds works the same as the mouse right click. y Right Click Delay This option allows the user to make moving the pointer position work the same as the mouse right y Enable Configuration click. You can also specify the distance to move When this option is selected, you can set the (from Long to Short).
Page 32
Declaration of Conformity Trade Name: LG Model : CBV42L Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 *above information is only for USA FCC Regulatory This device meets the EMC require- ments for home appliances (Class B) and is intended for home use.
