Related Manuals for Bosch use IP FLEXIDOME IP starlight 6000 VR
Summary of Contents for Bosch use IP FLEXIDOME IP starlight 6000 VR
- Page 1 FLEXIDOME IP starlight 6000 VR NIN-63013 | NIN-63023 www.use-ip.co.uk 01304 827609 Installation Manual...
-
Page 3: Table Of Contents
Mounting flush to ceiling 5.4.2 Mounting to ceiling with SMB-IP Camera positioning and field-of-view 5.5.1 5.5.2 Tilt 5.5.3 Twist Local set-up 5.6.1 Using the install wizard 5.6.2 Reset Mount inner and outer dome Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711... - Page 4 | Table of Contents 6000 VR Connection via web browser Configuration Troubleshooting Resolving problems Testing the network connection Customer service Maintenance Cleaning 9.1.1 Lens cleaning Repair Decommissioning 10.1 Transfer 10.2 Disposal Technical data 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems...
-
Page 5: Safety
Do not install device near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat. Never spill liquid of any kind on the device. Take precautions to protect the device from power and lightning surges. Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711... - Page 6 10. Protect all connection cables from possible damage, particularly at connection points. 11. Connect the yellow/green earth wire of the camera to the system earth of the installation to ensure correct safety and EMC/RFI protection. 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems...
-
Page 7: Short Information
For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. -
Page 8: System Overview
Refer to the software manual for more information on the browser interface. The web browser is the most direct way of using the camera, however, the Bosch download store provides several other free applications (listed below) for viewing and controlling the camera. - Page 9 IP cameras and appliances. The software supports up to 16 cameras. Bosch Video Client The Bosch Video Client is a free Windows application to view, operate, control, and administer surveillance cameras and installations at remote locations. It offers a user-friendly interface for easy live viewing of multiple cameras, playback, forensic search and export.
-
Page 10: Application Variants
Starlight mode (default) – to continue viewing in color at very low light levels – Extended Dynamic mode - simultaneously see details in very bright and very dark objects in the same scene 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems... -
Page 11: Planning Information
Verify that all parts are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packaging is the safest container in which to transport the unit and can be used if returning the unit for service. -
Page 12: Installation
3 screws. To remove the desiccant sachet: Slide the sachet out of its storage slot in the camera. Dispose of the sachet in an environmentally friendly way. DESICCANT SILICA GEL 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems... -
Page 13: Local Storage
Notice! Use proper surge suppression on network/video/power/audio/ data/alarm cables that are routed outdoors, or close to large inductive loads or electrical mains supply cables. Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711... -
Page 14: Cable Tree
Alarm In 2 White Audio In (Shield) Ground (Audio) Black Audio Out CVBS analog connector 5.3.2 Earthing Caution! This device must be connected to earth (ground). Safety (power) ground is indicated by the symbol. 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems... -
Page 15: Network (And Poe Power)
The auxiliary power supply unit must be isolated from earth. 5.3.5 Alarm Use the stranded and solid wires with maximum diameter AWG 22-28; only cut back 5 mm (0.2 in) of insulation. Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711... -
Page 16: Audio
5.3.7 Video Use the composite video connector (CVBS) on the camera to connect an analog monitor for setting up the camera or as a permanent analog output for viewing or recording: 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems... -
Page 17: Mounting The Camera Module
(not supplied). 57.6 (2.27) 57.6 (2.27) 4S box (x2) 133 ( 5.25) Ø Ø mm (in) Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711... -
Page 18: Mounting To Ceiling With Smb-Ip
Cut out the cable hole in the ceiling, and use a 8 mm (0.31 in) bit to drill the three mounting holes. Insert the supplied mounting plugs (8 x 40) into the mounting holes. 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems... - Page 19 12. If IP66 water ingress protection is required, connect the camera cabling to the source cabling inside an IP66 approved box. 13. Mount the camera to the SMB using the 3 supplied screws (M5x16mm torx). Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711...
-
Page 20: Camera Positioning And Field-Of-View
Apply power to the camera. After power-up, wait a little (about 20 seconds). Press the Menu button. This stops the IP video stream and enables the service video analog output. 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems... -
Page 21: Pan
5.5.1 For horizontal adjustment (pan): Rotate the camera module (1) in the base. Do not rotate more than 180° in either direction. Tighten the locking screw (2) with the supplied screwdriver bit. Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711... -
Page 22: Tilt
90°. Tighten the two thumbwheels (1). ≤90° 5.5.3 Twist To obtain a horizontal horizon (for tilted ceilings or sidewall mounting), twist the camera module to align the picture shown on the monitor. 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems... -
Page 23: Local Set-Up
To change the variant, briefly press Menu a number of times until the desired variant is shown (remember that changing the variant will reboot the system and may eventually need a reset to return to factory defaults). Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711... -
Page 24: Reset
Any changes to the settings are overwritten by the factory defaults. A reset may be necessary, for example, if the unit has invalid settings that prevent it from functioning as desired. 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems... -
Page 25: Mount Inner And Outer Dome
Check that the lens can move freely in the dome opening. Mount the outer dome by screwing in the 3 attachment bolts. Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711... - Page 26 FLEXIDOME IP starlight en | Installation 6000 VR Desiccant Desiccant >1 Nm 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems...
- Page 27 Identity and Password. Only after these have been configured can communication with the unit via the network occur. IP Helper tool Alternatively, use the IP Helper tool to detect Bosch devices on the network: Access the Bosch download store (http:// downloadstore.boschsecurity.com/).
- Page 28 If required, configure the parameters in other menus to suit your working environment (for example, ID, passwords, date and time). Refer to the operation manuals of the software for more information. 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems...
- Page 29 Faulty data Check the data transmission within transmission with the LAN. ping. The maximum Wait until there is a number of free connection and connections has call the transmitter been reached. again. Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711...
- Page 30 Alarm alarm. sources configuration page. No alarm response Specify the desired specified. alarm response on the Alarm connections configuration page; if necessary change the IP address. 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems...
- Page 31 The device is not properly connected to the network. Check the cable connections in this case. – The device is not correctly integrated into the network. Check the IP address, subnet mask, and gateway address. Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711...
- Page 32 6000 VR Customer service If a fault cannot be resolved, please contact your supplier or system integrator, or go directly to Bosch Security Systems Customer Service. The version numbers of the internal firmware can be viewed on a service page. Please note this information before contacting Customer Service.
- Page 33 Repair Notice! Never open the casing of the unit The unit does not contain any user-serviceable parts. Refer all repairs to suitable qualified specialists. Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711...
- Page 34 The unit should only be passed on together with this installation guide. 10.2 Disposal Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material.
- Page 35 Flush mount or surface mount Color White (RAL9010) trim ring with black inner liner Adjustment range 360º pan, 90º tilt, ±90º twist Dome bubble Polycarbonate, clear with UV blocking anti-scratch coating Trim ring Aluminum Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711...
- Page 36 5% to 93% relative humidity Storage humidity Up to 98% relative humidity Impact protection IK10 Water/dust IP 66 and NEMA Type 4X (with protection appropriate installation standards) Dimensions Ø158 (6.22) Ø95 (3.7) mm (in) 2016.06 | v1.0 | AM18-Q0711 Bosch Security Systems...
- Page 37 FLEXIDOME IP starlight Technical data | en 6000 VR Ø158 (6. 22) (i n) Bosch Security Systems 2016.06 | v1.0 | AM18-Q0711...
- Page 40 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2016...