Related Manuals for Fujitsu F2MC-8L
Summary of Contents for Fujitsu F2MC-8L
- Page 3 • Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of Fujitsu or any third party or does Fujitsu warrant non-infringement of any third-party' s intellectual property right or other right by using such information.
-
Page 4: Handling Precautions
1. Checking the Delivered Product and Accessories Before using the MB2144-222 or MB2144-222-01, confirm that the following components are included in the product package. ❍ For the MB2144-222: • • • • (*1) MB2144-210A (universal cable assembly) • • • • MB2144-222-01 (probe header): 1 •... -
Page 5: Electric Shock
3. Using the Products I Setting the jumper plug to switch the subclock source The jumper plug for switching the subclock source on the probe header is used to switch the source supplying the subclock. A subclock oscillation circuit of 32.768 kHz is mounted on the probe header to supply the subclock. Depending on the operating environment, change the setting of the jumper plug to select whether the subclock is supplied from a user system or from the probe header. - Page 6 I Setting the jumper plug to switch the C terminal The jumper plug for switching the C terminal on the probe header is used to switch the C terminal capacitive-termination. A 0.1 µF capacitor is mounted on the probe header to perform C terminal capacitive-termination. Depending on the operating environment, change the setting of the jumper plug to select whether C terminal capacitive-termination is performed on a user system or on the probe header.
- Page 7 I Connecting the universal cable assembly To connect the universal cable assembly and the probe header, connect the two 34-pin connectors of the universal cable assembly and the two 34-pin connectors on the probe header. The connectors on the universal cable assembly, and the mounting section of the connectors on the probe header are marked "A"...
- Page 8 I Connecting the probe header to a user system To connect the probe header and the user system, connect the probe header to the NQPACK064RZ mounted on the user system using the YQPACK064RZ. An index mark (one corner of the YQPACK064RZ or NQPACK064RZ is clipped) indicates the first pin on the YQPACK064RZ and on the NQPACK064RZ.
- Page 9 I Mounting the MCU When mounting the MCU on the user system without connection to an emulator, use the HQPACK064RZ to secure the MCU. An index mark (one corner of the NQPACK064RZ or HQPACK064RZ is clipped) indicates the first pin on the NQPACK064RZ and the HQPACK064RZ. Also, an index mark (G in a depression) on the MCU indicates the first pin.
- Page 10 4. Note on Using the MB2144-222 and MB2144-222-01 A limit exists on the height of components to be mounted on the user board around the probe header to ensure connection between the probe header and the user system. Take this limit into consideration when designing a PC board for the user system. 42.0 mm 67.4 mm Approximately 14 mm...
- Page 11 SS01-25002-1E FUJITSU SEMICONDUCTOR • SUPPORT SYSTEM MC-8L QFP-64 PROBE and PROBE HEADER for MB89690 Series MB2144-222/MB2144-222-01 OPERATION MANUAL April 2003 the first edition FUJITSU LIMITED Electronic Devices Published Edited Business Promotion Dept.