Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
HP A9508-V Switch Chassis（JC474B）
HP A8808-V Router Chassis （JC149B）
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
11
1
0
0
0
0
1
2
0
7
0
0
0
Page 1
Related Manuals for HP A9508-V
Summary of Contents for HP A9508-V
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
- Page 3 38. Remove film 6-3 from front panel 6-1. 39. Remove plastic panel 10-1. 40. Unscrew the screw on plastic panel 10-2, and then remove plastic panel 10-2 from frame 10-3. 41. Unscrew the screws on plastic panel 11-1, and then remove plastic panel 11-1 from panel 11-2. 42.
- Page 4 Figure 3 Remove wire channel Figure 4 Treatments to the product (rear view) EL-MF877-00 Page 4 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 5 Figure 5 Part 1 Figure 6 Treatments to wire channel 7 Figure 7 Treatments to front panel 4 EL-MF877-00 Page 5 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 6 Figure 8 Treatments to front panel 5 Figure 9 Treatments to blank filler panel 6 Figure 10 Treatments to blank poe module panel 10 Figure 11 Treatments to blank power module panel 11 Figure 12 Treatments to fan frame 13 EL-MF877-00 Page 6 Template Revision B...