Frigidaire Bern RSF-1/0324 Important Instructions & Operating Manual

Frigidaire Bern RSF-1/0324 Important Instructions & Operating Manual

Floor standing fireplace

Quick Links

IMPORTANT INSTRUCTIONS & OPERATING MANUAL
Bern
Floor Standing Fireplace
Item No: RSF-1/0324
Read these instructions carefully before attempting to assemble, install, operate or maintain
the product. Protect yourself and others by observing all safety information. Failure to comply
with instructions could result in personal injury and / or property damage. Retain instructions
for future reference.
1
loading

Summary of Contents for Frigidaire Bern RSF-1/0324

  • Page 1 IMPORTANT INSTRUCTIONS & OPERATING MANUAL Bern Floor Standing Fireplace Item No: RSF-1/0324 Read these instructions carefully before attempting to assemble, install, operate or maintain the product. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and / or property damage. Retain instructions for future reference.
  • Page 2: General Safety Information

    GENERAL SAFETY INFORMATION When using this fireplace, basic precautions should always be taken to reduce the risk of fire, electric shock and injury to persons, including the following: CAUTION – Due to the high temperature, keep electrical cords, drapery and other furnishings at least 3 feet from the front, side and rear of the fireplace.
  • Page 3 23. Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that the fireplace plug properly fits into the outlet before each use. During use, make sure the fireplace plug does not overheat. If necessary, have a qualified electrician check and / or replace the wall outlet. 24.
  • Page 4 Helpful Advice Before Installation  Please retain all packaging until all the parts and other package contents are accounted for.  It is recommended to place your fireplace near an existing wall outlet for ease of electric connection.  Store your fireplace in a dry, safe and dust-free place while drilling during fireplace installation. ...
  • Page 5: Troubleshooting

    Troubleshooting Problem Possible Solution · Check if the unit is plugged in the power outlet. · Check if the unit is in Standby mode. If so, turn Unit does not work / does not heat the unit ON. · Check if the heat is turned OFF. ·...
  • Page 6 Replacing the Light Bulb (continued)  Access the bulb by removing the four screws located on the back panel.  Replace the bulb with a new one. Extra caution should be taken because the bulb can be hot.  Close the panel lid using screws. ...