Page 1
READ AND SAVE THESE INSTRUCTIONS CF711 shown 50” PRO SERIES II 42” PRO SERIES II Model No. Model No. CF711AB02 CF711ORS02 CF710AB02 CF711AW02 CF711PB02 CF710AW02 CF711BS02 CF711WB02 CF710BS02 CF711CK02 CF711WW02 CF710ORB02 CF711ORB02 CF710PB02 CF710WW02 15.0 19.8 Net Weight: Lbs. Net Weight: Lbs.
Page 2
NOTE: The CF711 fan is suitable for use with solid-state speed controls. WARNING: To avoid fire, shock or injury, do not use an Emerson or any other brand of control not specifically approved for this fan.
Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. 1. Check to see that you have received the following A.
Page 4
HANGER BALL/DOWNROD IMPORTANT DECORATIVE ASSEMBLY Your ceiling fan is designed to be installed CEILING either in the standard manner, or in the HAIRPIN COVER CLIP close-to-the-ceiling manner. Using the SETSCREW standard method, the hanger ball/downrod assembly will suspend the fan several inches CLEVIS below the ceiling cover.
NOTE: The hanger bracket must be mounted Installing The flush with the ceiling in order for the ceiling cover Hanger Bracket to install properly. If necessary, use leveling washers (not supplied) between the outlet box and the hanger bracket. WARNING 2.
Electrical Requirements Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds. WARNING HANGER BRACKET...
2. Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector INSTALL SCREW AND WASHER TIGHTEN SCREW supplied (Figure 9). Securely connect the fan motor black wire and blue wire to the supply black (hot) wire using wire connector supplied (Figure 9).
Page 8
2. Mount one blade assembly to the motor hub by Removal Of The mating the alignment post (Figure 11) of the flange Light Fixture with one of the alignment slots in the motor hub (Figure 12). Then tighten the two captive screws in the flange to secure the flange to the motor hub.
Using Your Ceiling Fan 1. Restore electrical power to the outlet box by turning the electricity on at the main fuse box. SPEED CONTROL 2. Check the operation of the light by gently pulling on PULL CHAIN SWITCH the light switch pull chain. REVERSING SWITCH 3.
What Will Emerson Electric Co. Do To Correct Problems: Emerson Electric Co. will replace a defective Emerson Air Comfort Ceiling Fan motor, blade, component or other accessory at no charge to you. If repair of the motor or blades is not practical or possible within a reasonable time and no replacement can be provided, Emerson Electric Co. will refund the actual purchase price of your fan.
Repair Parts Before discarding packaging material, be certain all parts have been removed. HOW TO ORDER REPAIR PARTS WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION: • PART NUMBER • PART DESCRIPTION • NAME OF ITEM • MODEL NUMBER For repair parts, phone 1-800-654-3545.
Page 12
— Owner's Manual BP7258-8 BP7258-8 BP7258-8 BP7258-8 BP7258-8 BP7258-8 — Air Comfort Products Form No. BP7258-8 Part No. F40BP72580008 Printed in China 06/10 DIVISION OF Emerson Electric Co. U.L. Model No.: 42-ANT/52-ANT 8100 W. Florissant • St. Louis, MO 63136...