Table of Contents
Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds
(page 56, 60).
– Handset: To finish intercom, press
MOFFN. To answer the call, press M
or MCELLN.
– Base unit: To finish intercom, press
MSP-PHONEN. To answer the call, press
MSP-PHONEN again or the
corresponding cellular line key (MCELL
1N or MCELL 2N).
R To change the handset ringer volume and
ringer tone for intercom, see page 56.
Making an intercom call
Handset
1
MMENUN a MbN: "Intercom" a
MSELECTN
2
MbN: Select the desired unit or "Voice
paging". a MSELECTN
R If you select "Voice paging", speak
into the microphone after the beep.
Your voice will be heard using the
speakers of the base unit and all
handsets, until a paged party answers
your page or until you press MOFFN.
After the other party answers, the
speakerphone mode is turned on.
3
When you finish talking, press MOFFN.
Note:
R You can also use the MINTERCOMN soft
key, if displayed, to make intercom calls.
R You cannot use voice paging if other units
are in use.
For assistance, please visit http://shop.panasonic.com/support
Base unit
1
Press MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
2
When you finish talking, press
MSP-PHONEN.
Answering an intercom call
N
Handset
1
Press M
N to answer the page.
2
When you finish talking, press MOFFN.
Base unit
1
Press MSP-PHONEN to answer the page.
2
When you finish talking, press
MSP-PHONEN.
Turning auto intercom on/off
This feature allows the handset or base unit to
answer intercom calls automatically when it is
called. You do not need to press M
handset or MSP-PHONEN on the base unit.
When this feature is set to "On", the
monitoring handset or base unit for the baby
monitor feature (page 65) will also answer
baby monitor calls automatically. The default
setting is "Off".
Handset / Base unit
1
MMENUN#273
2
MbN: Select the desired setting. a
MSAVEN
3
Proceed with the operation for your unit
Handset: MOFFN
Base unit: MEXITN
Note:
R This feature is not available for all handsets
paging and voice paging even if it is turned
on.
Intercom
N on the
37
Table of Contents
