Related Manuals for Black & Decker BDH1765SM
Summary of Contents for Black & Decker BDH1765SM
- Page 1 STEAM MOP INSTRUCTION MANUAL CATALOG NUMBER BDH1765SM Thank you for choosing BLACK+DECKER! PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON. SAVE THIS MANUAL FOR FUTURE REFERENCE.
-
Page 2: Safety Guidelines - Definitions
SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. -
Page 3: After Use
• Do not leave the appliance connected to an electrical outlet when not in use. • Never pull the power cord to disconnect the appliance from the socket. Keep the appliance cord away from heat, oil and sharp edges. • Do not handle steam cleaner with wet hands. •... -
Page 4: Functional Description
FUNCTIONAL DESCRIPTION 1. ON/Off switch 2. SmartSelect Button 3. Removable Water Tank 4. Handle Tube 5. Steam Head 6. Micro-Fiber Cleaning Pad 7. Lift and Reach Head Cleaning Pad ASSEMBLY NOTICE: Each steam mop is 100% tested in the factory to ensure product performance and safety. - Page 5 ATTACHING A CLEANING PAD - Fig. D Replacement cleaning pads are available from your BLACK+DECKER dealer (cat. no. SMP20). • Place a micro-fiber cleaning pad (6) on the floor with the ‘hook & loop’ side facing up. • Press steam mop down onto the cleaning pad (6).
-
Page 6: Operation
• Place the tip of the Lift and Reach Head into the steam head (5) and push downward. Ensure it is locked into place by gently pulling upwards on the handle. NOTICE: Do not store with a wet pad as this can damage your floor. Always place the steam mop with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use. - Page 7 SmartSelect Dial - Fig. J The steam mop is equipped with a SmartSelect dial (20) which shows various hard floor surface cleaning applications. A Light will glow next to the selected application. To change the application, press and release the SmartSelect button (2) repeatedly until the light glows next to the correct operating mode for your particular...
-
Page 8: Steam Cleaning
from vinyl or linoleum floors, you can pre-treat them with a mild detergent and some water before using the steam mop. STEAM CLEANING • Place a cleaning pad (6) on the floor with the ‘hook & loop’ side facing up. •... -
Page 9: Troubleshooting
ACCESSORIES Recommended accessories for use with your appliance are available from your local dealer or authorized service center. WARNING: The use of any accessory not recommended for use with this appliance could be hazardous. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION •...