Siemens 17 Replacement Parts And Instruction Manual

s

Combination Starters, Classes 17, 18, 25, 26 and 32

Starter Sizes 0 - 4

Replacement Parts and Instruction Guide

THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS IN

EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET IN

CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD

FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE

WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER'S PURPOSES, THE

MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.

THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF OR

MODIFY ANY PRIOR OR EXISTING AGREEMENT, COMMITMENT OR RELATIONSHIP.

THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE

WARRANTY CONTAINED IN THE CONTRACT BETWEEN PARTIES IS THE SOLE

WARRANTY OF SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE

NEW WARRANTIES OR MODIFY THE EXISTING WARRANTY

Siemens Industry, Inc. 3617 Parkway Ln, Peachtree Corners, GA 30092 www.usa.siemens.com

IMPORTANT

.

E87010-A0137-T003-A4

Hazardous voltage.

Will cause death, serious personal injury,

or property damage.

Always de-energize and ground the equipment before

maintenance. Read and understand this manual before

installing, operating or maintaining the equipment.

Maintenance should be performed only by qualified

personnel. The use of unauthorized parts in the repair of

the equipment or tampering by unqualified personnel may

result in dangerous conditions which may cause death or

serious personal injury or equipment or property damage.

Follow all safety instructions contained herein.

Short-Circuit Explosion Hazard. Can cause death, serious

personal injury, or property damage. Fully engage all

door latches and spread ends of door hinge pins

approximately 45 degrees before energizing equipment.

SIGNAL WORDS

The signal words "Danger","Warning" and "Caution"

used in this manual indicate the degree of hazard that

may be encountered by the user.

These words are defined as below:

Danger - Indicates death, severe personal injury or

property damage will result if proper

precautions are not taken.

Warning - Indicates death, severe personal injury, or

property damage can result if proper

precautions are not taken.

Caution - Indicates personal injury or property

damage may result if proper precautions

are not taken.

QUALIFIED PERSON

For the purpose of this manual and product labels a

qualified person is one who is familiar with the installa-

tion, construction, operation, or maintenance of the

equipment and the hazards involved. In addition this

person has the following qualifications:

(a) is trained and authorized to energize,

de-energize, clear, ground, and tag circuits

and equipment in accordance with established

safety practices.

(b) is trained in the proper care and use of

protective equipment such as rubber gloves,

hard hat, safety glasses or face shields, flash

clothing, etc., in accordance with established

safety practices.

(c) is trained in rendering first aid.

August 2020

Supersedes Issue of

June 2015

A5E31166526A-003