Motorola MR535 User Manual

Motorola MR535

LED Flashlight User Guide

Congratulations on your purchase of the Motorola MR535 high- performance, high durability flashlight.

The Motorola MR535 utilizes CREE XP-G2 LED technology that is geared for optimum effectiveness and

high efficiency. Its ability to endure rugged use is enabled by the aircraft grade aluminum with premium

Type II anodized anti-abrasive finish. It is lightweight and compact in design making it a great option for

portability. Use it in any situation such as hunting, hiking, camping, caving, general household, recreational

activities, rugged sports, industrial work or emergency situations. Please take a few moments to read this

user guide to ensure that you get the best performance and years of trouble free service.

Package includes

· 1 Motorola MR535 LED Flashlight

· 1 16340 Rechargeable Li-ion Battery, 550mAh

· 1 Belt Clip

· 1 micro-USB Cable

· 1 User Guide

Product Description

Battery Installation

1. Unscrew the tail switch cap and insert 1x16340

rechargeable (Li-ion) battery (included).The (+) terminal on

the battery should face toward the flashlight's head.

2. Replace the tail switch cap and turn on the flashlight as

indicated in any of the options listed below.

16340

With the light on, the charge indicator light (located on the side switch) will flash once per second when the

battery charge has reached 30% of full charge. When the battery charge has reached 10%, the charge

indicator light will flash to indicate low battery capacity.

Charging the MR535

The Motorola MR535 charge indicator light will blink during the ON modes to indicate the battery is

depleted and needs to be charged.

1. With the light in the OFF mode, open the rubber plug on the micro-USB charging port to reveal the

micro-USB charging connector.

2. Connect the MR535 to a power outlet using the included cable.

3. The charge indicator light will turn red to indicate the battery is charging.

4. Once the battery is fully charged, the charge indicator light will turn blue.

5. Remove the micro-USB cable and re-seat the rubber plug on the micro-USB charging port to maintain

waterproof integrity.

NOTE: The flashlight will not illuminate while charging.

Head

micro-USB

Port

Switch

Tall Cap

Flashlight Operation

Your Motorola MR535 flashlight has a side switch for on/off operation and is equipped with 4 illumination

light modes to suit your varied needs.

Turn ON

Press and hold the side switch for 1 to 3 seconds and release to turn the light on.

Turn OFF

Press and hold the side switch for 1 to 3 seconds. The light will turn off. Release the side switch.

Lockout Mode

Your Motorola MR535 is equipped with a lockout mode to minimize or prevent unintended operation

Enter Lockout Mode.

With the light off, press and hold the side switch for 3 to 4 seconds. The MR535 will flash 2 times to

indicate the light is in lockout mode.

Exit Lockout Mode.

With the light off and in lockout mode, press and hold the side switch until the light turns on. The MR535

will exit lockout mode and return to the brightness setting selected when placed into lockout mode.

Changing the Brightness Setting

Your Motorola MR535 has 3 different preset brightness levels as follows:

high → medium → low

With the light on, single press and release the side switch to cycle through the different brightness levels.

Memory Function

Your Motorola MR535 flashlight has a memory function. The light will memorize the selected brightness

setting when turning the light off. The next time the light is turned on, it automatically resumes to the

previously selected brightness level.

Note that the memory function does NOT include the strobe mode. If the light is turned off while in strobe

mode, the light will come back on in the last brightness setting (high, medium, low) that was active prior

to strobe mode.

Strobe Mode

Your Motorola MR535 flashlight is equipped with a strobe mode that can be accessed from any light

setting including the OFF position, except when the light is in lockout mode. When strobe mode is

entered, the light will automatically switch to the high brightness setting.

To enter strobe, quickly double click the side switch to activate the strobe mode.

To exit strobe mode, quickly double click again. The flashlight will exit from strobe mode and return to the

last light setting, including OFF.

Battery Charge Indicator Light

Note: When the charge indicator light is blinking, it means to indicate the battery is

nearly depleted and needs to be charged.

Maintenance and Precautions

· Do not disassemble the sealed head. Doing so can cause damage to the flashlight and will void the

warranty.

· Use a high-quality battery to mitigate the risk of the flashlight being damaged by electrolyte leakage or

battery breakage.

· If the flashlight will not be used for a long time, remove the battery to avoid damage caused from battery

leakage.

· Lubricate the O-rings regularly using a Q-Tip

the contacts to prevent corrosion. Doing so will keep the flashlight properly sealed against water. If the

O-rings are damaged after prolonged use, replace them.

. Apply a small dab of silicone grease or petroleum jelly to

®