Table of Contents
4) Auto restart
Enable or disable automatic restart after a power interruption.
Setting description
Enable
Disable
* Auto restart is an emergency function such as for power outage etc.
Do not attempt to use this function in normal operation.
Be sure to operate the unit by remote controller or external input device.
5) Room temperature sensor switching
(Only for wired remote controller)
When using the Wired remote controller temperature sensor, change the setting to "Both" (01).
Setting description
Indoor unit
Both
00: Sensor on the indoor unit is active.
01: Sensors on both indoor unit and wired remote controller are active.
6) Remote controller custom code
(Only for wireless remote controller)
The indoor unit custom code can be changed.
Select the appropriate custom code.
Setting description
A
B
C
D
7) External input control
"Operation/Stop" mode or "Forced stop" mode can be selected.
Setting description
Operation/Stop mode
(Setting prohibited)
Forced stop mode
8) Indoor unit fan control for energy saving for cooling
Enable or disable the power-saving function by controlling the indoor unit fan rotation when the
outdoor unit is stopped during cooling operation.
Setting description
Disable
Enable
00: When the outdoor unit is stopped, the indoor unit fan operates continuously following
the setting on the remote controller.
01: When the outdoor unit is stopped, the indoor unit fan operates intermittently at a very
low speed.
( ... Factory setting)
Function number
Setting value
40
( ... Factory setting)
Function number
Setting value
42
( ... Factory setting)
Function number
Setting value
44
( ... Factory setting)
Function number
Setting value
46
( ... Factory setting)
Function number
Setting value
49
- (01 - 27) -
00
01
00
01
00
01
02
03
00
01
02
00
01
Hide quick links:
Chapters
Table of Contents
