Yamaha 2006 Virago XV250V Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motocycles
  5. 2006 Virago XV250V
  6. Owner's manual

Yamaha 2006 Virago XV250V Owner's Manual

Hide thumbs
Table of Contents

Quick Links

OWNER'S MANUAL
XV250V
2UJ-28199-23
Table of Contents
loading

Related Manuals for Yamaha 2006 Virago XV250V

Summary of Contents for Yamaha 2006 Virago XV250V

  • Page 1 OWNER’S MANUAL XV250V 2UJ-28199-23...
  • Page 3 EAU10100 Welcome to the Yamaha world of motorcycling! As the owner of the XV250V, you are benefiting from Yamaha’s vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
  • Page 4 This manual should be considered a permanent part of this motorcycle and should remain with it even if the motorcycle is subsequently sold. Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current product information available at the time of printing, there may be minor discrepancies between your motorcycle and this manual.
  • Page 5 IMPORTANT MANUAL INFORMATION EAU10200 XV250V OWNER’S MANUAL ©2005 by Yamaha Motor Co., Ltd. 1st edition, April 2005 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd. is expressly prohibited. Printed in Japan.

  • Page 6: Table Of Contents

    TABLE OF CONTENTS SAFETY INFORMATION ....1-1 PRE-OPERATION CHECKS ..... 4-1 Spoke wheels ......6-14 Location of important labels ....1-5 Pre-operation check list ....4-2 Adjusting the clutch lever free play ........6-14 DESCRIPTION ........2-1 OPERATION AND IMPORTANT Adjusting the brake lever Left view ..........2-1 RIDING POINTS.........
  • Page 7 TABLE OF CONTENTS Checking the wheel bearings ..6-26 Battery ..........6-26 Replacing the fuses ......6-28 Replacing the headlight bulb ..6-28 Replacing the tail/brake light bulb ...........6-30 Replacing a turn signal light bulb ...........6-30 Supporting the motorcycle ....6-31 Front wheel ........6-32 Rear wheel ........6-33 Troubleshooting ......6-35 Troubleshooting chart ....6-36 MOTORCYCLE CARE AND...

  • Page 8: Safety Information

    SAFETY INFORMATION EAU10251 AND/OR WHEN MADE NECES- • Ride where other motorists can SARY BY MECHANICAL CONDI- see you. Avoid riding in another MOTORCYCLES SINGLE TIONS. motorist’s blind spot. TRACK VEHICLES. THEIR SAFE USE Many motorcycle accidents in- AND OPERATION ARE DEPENDENT Safe riding volve inexperienced operators.
  • Page 9 Modifications made to this motorcycle other motorists can see you. the single most critical factor in the pre- not approved by Yamaha, or the re- The posture of the operator and vention or reduction of head injuries. moval of original equipment, may ren- passenger is important for proper Always wear an approved helmet.
  • Page 10 Maximum load: been specifically designed for use on create instability due to improper 196 kg (432 lb) this motorcycle. Since Yamaha cannot weight distribution or aerody- test all other accessories that may be namic changes. If accessories When loading within this weight limit,...
  • Page 11 SAFETY INFORMATION tor and may limit control ability, Always turn the engine off before eyes, see your doctor immediately. therefore, such accessories are leaving the motorcycle unattended If any gasoline spills on your skin not recommended. and remove the key from the main or clothing, immediately wash the Use caution when adding electri- switch.

  • Page 12: Location Of Important Labels

    SAFETY INFORMATION EAU10381 Location of important labels Please read the following important labels carefully before operating this vehicle.
  • Page 13 SAFETY INFORMATION Before you operate this vehicle, read the owner’s manual. Cold tire normal pressure should be set Prima di usare il veicolo, as follows. leggete il manuale di istruzioni. Lire le manuel du propriétaire avant d’utiliser ce véhicule. 1.75 Lesen Sie die Bedienungsanleitung 2.00 bevor Sie dieses Fahrzeug fahren.

  • Page 14: Description

    DESCRIPTION EAU10410 Left view 1. Headlight (page 6-28) 10.Shift pedal (page 3-4) 2. Steering lock (page 3-8) 3. Fuel tank (page 3-5) 4. Battery (page 6-26) 5. Fuses (page 6-28) 6. Helmet holder (page 3-9) 7. Shock absorber assembly spring preload adjusting ring (page 3-9) 8.

  • Page 15: Right View

    DESCRIPTION EAU10420 Right view 1. Tail/brake light (page 6-30) 9. Shock absorber assembly spring preload adjusting ring (page 3-9) 2. Rear turn signal lights (page 6-30) 3. Rider seat (page 3-8) 4. Air filter element (page 6-9) 5. Front turn signal light (page 6-30) 6.

  • Page 16: Controls And Instruments

    DESCRIPTION EAU10430 Controls and instruments 1. Clutch lever (page 3-3) 2. Left handlebar switches (page 3-2) 3. Speedometer unit (page 3-2) 4. Indicator lights (page 3-1) 5. Right handlebar switches (page 3-2) 6. Brake lever (page 3-4) 7. Throttle grip (page 6-12) 8.

  • Page 17: Instrument And Control Functions

    INSTRUMENT AND CONTROL FUNCTIONS EAU10450 EAU10980 EAU11090 Main switch Indicator lights High beam indicator light “HIGH BEAM” This indicator light comes on when the high beam of the headlight is switched 1. High beam indicator light “HIGH BEAM” The main switch controls the ignition 2.

  • Page 18: Speedometer Unit

    INSTRUMENT AND CONTROL FUNCTIONS EAU11630 EAU12343 Right Speedometer unit Handlebar switches Left 1. Engine stop switch “ENGINE STOP” 2. Hazard switch “HAZARD” 1. Odometer 3. Start switch “START” 2. Tripmeter 1. Pass switch “PASS” 3. Tripmeter reset knob 2. Dimmer switch “LIGHTS” 4.

  • Page 19: Clutch Lever

    INSTRUMENT AND CONTROL FUNCTIONS ter position. To cancel the turn signal EAU12751 EAU12820 Hazard switch “HAZARD” Clutch lever lights, push the switch in after it has re- With the key in the “ON” position, use turned to the center position. this switch to turn on the hazard light (simultaneous flashing of all turn signal EAU12510...

  • Page 20: Shift Pedal

    INSTRUMENT AND CONTROL FUNCTIONS EAU12870 EAU12890 EAU12941 Shift pedal Brake lever Brake pedal 1. Shift pedal 1. Brake lever 1. Brake pedal The shift pedal is located on the left The brake lever is located at the right The brake pedal is on the right side of side of the engine and is used in com- handlebar grip.

  • Page 21: Fuel Tank Cap

    INSTRUMENT AND CONTROL FUNCTIONS EAU13040 EAU13210 Fuel tank cap NOTE: Fuel The fuel tank cap cannot be closed un- less the key is in the lock. In addition, the key cannot be removed if the cap is not properly closed and locked. EWA11090 WARNING Make sure that the fuel tank cap is...

  • Page 22: Fuel Cock

    With the fuel cock lever in this position, as well as to the exhaust system. fuel flows to the carburetor when the Your Yamaha engine has been de- engine is running. Turn the fuel cock le- signed to use regular unleaded gaso-...

  • Page 23: Starter (Choke) Lever

    INSTRUMENT AND CONTROL FUNCTIONS EAU13630 Starter (choke) lever 1. Arrow mark positioned over “RES” 1. Arrow mark positioned over “PRI” 1. Starter (choke) lever This indicates reserve. With the fuel This indicates prime. With the fuel cock Starting a cold engine requires a richer cock lever in this position, the fuel re- lever in this position, the engine can be air-fuel mixture, which is supplied by...

  • Page 24: Steering Lock

    INSTRUMENT AND CONTROL FUNCTIONS EAU13730 To unlock the steering EAU14220 Steering lock Rider seat 1. Open the steering lock cover, and then insert the key. To remove the rider seat 2. Push the key in, turn it 1/8 turn Remove the bolts, and then pull the rid- counterclockwise so that it moves er seat off.

  • Page 25: Helmet Holder

    INSTRUMENT AND CONTROL FUNCTIONS EAU14281 EAU14880 Helmet holder Adjusting the shock absorber assemblies 1. Projection 2. Seat holder 1. Helmet holder 2. Place the rider seat in the original 2. Unlock. 1. Spring preload adjusting ring position, and then tighten the bolts. 2.

  • Page 26: Sidestand

    INSTRUMENT AND CONTROL FUNCTIONS EWA10210 EAU15301 below and have a Yamaha dealer re- Sidestand WARNING pair it if it does not function proper- The sidestand is located on the left side Always adjust both shock absorber of the frame. Raise the sidestand or...

  • Page 27: Ignition Circuit Cut-Off System

    Periodically check the operation of the ignition circuit cut-off system according to the following procedure. EWA10250 WARNING If a malfunction is noted, have a Yamaha dealer check the system be- fore riding. 3-11...
  • Page 28 5. Push the start switch. Does the engine start? The neutral switch may be defective. The motorcycle should not be ridden until checked by a Yamaha dealer. With the engine still running: 6. Move the sidestand up. 7. Keep the clutch lever pulled.

  • Page 29: Pre-Operation Checks

    PRE-OPERATION CHECKS EAU15591 The condition of a vehicle is the owner’s responsibility. Vital components can start to deteriorate quickly and unexpectedly, even if the vehicle remains unused (for example, as a result of exposure to the elements). Any damage, fluid leakage or loss of tire air pressure could have serious consequences.

  • Page 30: Pre-Operation Check List

    • Make sure that operation is smooth. • Check cable free play. Throttle grip 6-12, 6-23 • If necessary, have Yamaha dealer adjust cable free play and lubricate cable and grip housing. • Make sure that operation is smooth. Control cables 6-22 •...
  • Page 31 • Correct if necessary. • Check operation of ignition circuit cut-off system. Sidestand switch 3-10 • If system is defective, have Yamaha dealer check vehicle. • Check fluid level. Battery 6-26 • Fill with distilled water if necessary.

  • Page 32: Operation And Important Riding Points

    Become thoroughly familiar system to enable starting, one of the Yamaha dealer check the electrical cir- with all operating controls and following conditions must be met: cuit. their functions before riding. The transmission is in the neutral Consult a Yamaha dealer re- position.

  • Page 33: Starting A Warm Engine

    OPERATION AND IMPORTANT RIDING POINTS ECA11130 EAU16640 EAU16671 Starting a warm engine Shifting CAUTION: Follow the same procedure as for start- For maximum engine life, always ing a cold engine with the exception warm the engine up before starting that the starter (choke) is not required off.

  • Page 34: Tips For Reducing Fuel Consumption

    OPERATION AND IMPORTANT RIDING POINTS ECA10260 EAU16800 EAU16841 Tips for reducing fuel Engine break-in CAUTION: consumption There is never a more important period Even with the transmission in in the life of your engine than the period Fuel consumption depends largely on the neutral position, do not between 0 and 1600 km (1000 mi).

  • Page 35: Parking

    CAUTION: touch them. If any engine trouble should occur Do not park on a slope or on soft during the engine break-in period, ground, otherwise the vehicle immediately have a Yamaha dealer may overturn. check the vehicle.

  • Page 36: Periodic Maintenance And Minor Repair

    If you are not familiar with mainte- certain maintenance work correctly. nance work, have a Yamaha dealer do it for you. NOTE: If you do not have the tools or experi- ence required for a particular job, have a Yamaha dealer perform it for you.

  • Page 37: Periodic Maintenance And Lubrication Chart

    The annual checks must be performed every year, except if a kilometer-based maintenance is performed in- stead. From 50000 km, repeat the maintenance intervals starting from 10000 km. Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills. ODOMETER READING (× 1000 km)
  • Page 38 PERIODIC MAINTENANCE AND MINOR REPAIR ODOMETER READING (× 1000 km) ANNUAL ITEM CHECK OR MAINTENANCE JOB CHECK √ √ √ √ √ • Check for cracks or damage. 9 * Brake hose • Replace. Every 4 years • Check runout, spoke tightness and for damage. √...
  • Page 39 PERIODIC MAINTENANCE AND MINOR REPAIR ODOMETER READING (× 1000 km) ANNUAL ITEM CHECK OR MAINTENANCE JOB CHECK √ √ √ √ Rear suspension relay • Check operation. 21 * arm and connecting √ √ • Lubricate with lithium-soap-based grease. arm pivoting points •...

  • Page 40: Removing And Installing The Panel

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU18751 EAU19543 Removing and installing the Checking the spark plugs panel The spark plugs are important engine components, which are easy to check. The panel shown needs to be removed Since heat and deposits will cause any to perform some of the maintenance spark plug to slowly erode, the spark jobs described in this chapter.
  • Page 41 If any spark plug shows a distinctly dif- ferent color, the engine could be defec- tive. Do not attempt to diagnose such 1. Spark plug gap problems yourself. Instead, have a Yamaha dealer check the vehicle. Spark plug gap: 0.6–0.7 mm (0.024–0.028 in)

  • Page 42: Engine Oil And Oil Filter Element

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU19751 2. Place an oil pan under the engine Engine oil and oil filter NOTE: to collect the used oil. The engine oil should be between the element 3. Remove the engine oil filler cap minimum and maximum level marks.
  • Page 43 PERIODIC MAINTENANCE AND MINOR REPAIR Tightening torque: NOTE: Engine oil drain bolt: Skip steps 4–6 if the oil filter element is 34 Nm (3.4 m·kgf, 24 ft·lbf) not being replaced. 8. Add the specified amount of the 4. Remove the oil filter element cover recommended engine oil, and then by removing the bolts.

  • Page 44: Cleaning The Air Filter Element

    PERIODIC MAINTENANCE AND MINOR REPAIR Make sure that no foreign mate- EAU32743 Cleaning the air filter element rial enters the crankcase. The air filter element should be cleaned 9. Start the engine, and then let it idle at the intervals specified in the periodic for several minutes while checking maintenance and lubrication chart.
  • Page 45 PERIODIC MAINTENANCE AND MINOR REPAIR 3. Remove the air filter case cover by 5. Remove the sponge material from 7. Pull the sponge material over the removing the screws. the air filter element frame, clean it air filter element frame. with solvent, and then squeeze the 8.

  • Page 46: Adjusting The Carburetor

    Therefore, most car- checked and, if necessary, adjusted as buretor adjustments should be left to a follows at the intervals specified in the Yamaha dealer, who has the neces- periodic maintenance and lubrication sary professional knowledge and expe- chart.

  • Page 47: Checking The Throttle Cable Free Play

    Yamaha dealer at the intervals specified in the periodic Tire air pressure maintenance and lubrication chart. The tire air pressure should be checked and, if necessary, adjusted before each ride.
  • Page 48 LOAD YOUR VEHICLE. Make sure in it, or if the sidewall is cracked, con- Tire air pressure (measured on cold that the total weight of the cargo, rid- tact a Yamaha dealer immediately and tires): er, passenger, and accessories have the tire replaced.

  • Page 49: Spoke Wheels

    WARNING age before each ride. If any dam- The front and rear tires should age is found, have a Yamaha be of the same make and de- dealer replace the wheel. Do not sign, otherwise the handling attempt even the smallest repair to 1.

  • Page 50: Adjusting The Brake Lever Free Play

    PERIODIC MAINTENANCE AND MINOR REPAIR 5. To increase the clutch lever free EAU22092 NOTE: Adjusting the brake lever free play, turn the adjusting nut in direc- If the specified clutch lever free play play tion (a). To decrease the clutch le- could be obtained as described above, ver free play, turn the adjusting nut tighten the locknut and skip the rest of...

  • Page 51: Adjusting The Brake Pedal Position And Free Play

    1. Locknut EWA10670 trol and an accident. WARNING 2. Brake pedal position adjusting bolt It is advisable to have a Yamaha 3. Tighten the locknut. dealer make these adjustments. EWA11230 WARNING After adjusting the brake pedal posi-...

  • Page 52: Adjusting The Rear Brake Light Switch

    The brake pedal free play should mea- obtained as described, have a switch sure 20.0–30.0 mm (0.79–1.18 in) at Yamaha dealer make this ad- the brake pedal end. Periodically check justment. the brake pedal free play and, if neces- After adjusting the brake pedal sary, adjust it as follows.

  • Page 53: Checking The Front Brake Pads And Rear Brake Shoes

    Observe these precautions: the wear indicator groove. If a brake the wear limit line, have a Yamaha pad has worn to the point that the wear dealer replace the brake shoes as a set.

  • Page 54: Changing The Brake Fluid

    Changing the brake fluid make sure that the top of the mas- denly, have a Yamaha dealer Have a Yamaha dealer change the ter cylinder is level by turning the check the cause. brake fluid at the intervals specified in handlebars.

  • Page 55: Drive Chain Slack

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU22760 2. Remove the cotter pin from the Drive chain slack axle nut, and then loosen the axle The drive chain slack should be nut. checked before each ride and adjusted 3. Loosen the chain puller locknut at if necessary.
  • Page 56 PERIODIC MAINTENANCE AND MINOR REPAIR 7. Adjust the brake pedal free play. Tightening torque: (See page 6-16.) Axle nut: EWA10660 104 Nm (10.4 m·kgf, 75 ft·lbf) WARNING 6. Insert a new cotter pin into the axle After adjusting the brake pedal free nut, and then bend its ends as play, check the operation of the shown.

  • Page 57: Cleaning And Lubricating The Drive Chain

    If a cable is damaged wet areas. Service the drive chain as or does not move smoothly, have a follows. Yamaha dealer check or replace it. ECA10581 CAUTION: Recommended lubricant: Engine oil...

  • Page 58: Checking And Lubricating The Throttle Grip And Cable

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU23111 EAU23131 EAU23140 Checking and lubricating the Checking and lubricating the Checking and lubricating the throttle grip and cable brake and shift pedals brake and clutch levers The operation of the throttle grip should The operation of the brake and shift The operation of the brake and clutch be checked before each ride.

  • Page 59: Checking And Lubricating The Sidestand

    Securely support the vehicle so that If the sidestand does not move up there is no danger of it falling over. and down smoothly, have a Yamaha dealer check or repair it. Check the inner tubes for scratches, damage and excessive oil leakage.

  • Page 60: Checking The Steering

    Securely support the vehicle so that fork does not operate smoothly, there is no danger of it falling over. have a Yamaha dealer check or re- pair it. 2. Hold the lower ends of the front fork legs and try to move them for- ward and backward.

  • Page 61: Checking The Wheel Bearings

    Yamaha dealer check tervals specified in the periodic mainte- the wheel bearings. nance and lubrication chart.
  • Page 62 PERIODIC MAINTENANCE AND MINOR REPAIR • INTERNAL: Drink large quan- that the breather hose is properly tities of water or milk and im- routed, in good condition, and not mediately call a physician. obstructed. • EYES: Flush with water for 15 ECA10600 CAUTION: minutes and seek prompt...

  • Page 63: Replacing The Fuses

    4. If the fuse immediately blows 1. Main fuse again, have a Yamaha dealer 2. Signaling system fuse check the electrical system. The main fuse and the signaling sys- tem fuse holders are located under the rider seat.
  • Page 64 7. Have a Yamaha dealer adjust the the glass, the luminosity of the bulb, headlight beam if necessary. and the bulb life will be adversely af- fected.

  • Page 65: Replacing The Tail/Brake Light Bulb

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU24131 EAU24210 Replacing the tail/brake light Replacing a turn signal light bulb bulb 1. Remove the tail/brake light lens by 1. Remove the turn signal lens by re- removing the screws. moving the screws. 1. Tail/brake light bulb 3.

  • Page 66: Supporting The Motorcycle

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU24350 a jack either under each side of the Supporting the motorcycle frame in front of the rear wheel or under Since this model is not equipped with a each side of the swingarm. centerstand, follow these precautions when removing the front and rear wheel or performing other maintenance requiring the motorcycle to stand up-...

  • Page 67: Front Wheel

    EAU24360 Front wheel EAU24600 To remove the front wheel EWA10820 WARNING It is advisable to have a Yamaha dealer service the wheel. Securely support the motor- cycle so that there is no danger 1. Wheel axle 1. Speedometer gear unit of it falling over.

  • Page 68: Rear Wheel

    To remove the rear wheel smoothly. EWA10820 WARNING 8. Connect the speedometer cable. It is advisable to have a Yamaha dealer service the wheel. Securely support the motor- cycle so that there is no danger 1. Speedometer gear unit of it falling over.
  • Page 69 PERIODIC MAINTENANCE AND MINOR REPAIR EAU32760 To install the rear wheel 1. Install the drive chain onto the rear sprocket, and then install the wheel by inserting the wheel axle from the right-hand side. 2. Install the brake rod onto the brake camshaft lever, and then install the brake pedal free play adjusting nut onto the brake rod.

  • Page 70: Troubleshooting

    WARNING self. However, should your motorcycle After adjusting the brake pedal free require any repair, take it to a Yamaha play, check the operation of the dealer, whose skilled technicians have brake light. the necessary tools, experience, and know-how to service the motorcycle properly.

  • Page 71: Troubleshooting Chart

    Remove the spark plugs and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the battery. 4. Battery The engine turns over The battery is good.

  • Page 72: Motorcycle Care And Storage

    MOTORCYCLE CARE AND STORAGE EAU26040 ucts onto seals, gaskets, sprock- cleaning products, solvent or Care ets, the drive chain and wheel thinner, fuel (gasoline), rust re- While the open design of a motorcycle axles. Always rinse the dirt and de- movers or inhibitors, brake flu- reveals the attractiveness of the tech- greaser off with water.
  • Page 73 MOTORCYCLE CARE AND STORAGE After normal use ECA10790 4. To prevent corrosion, it is recom- CAUTION: Remove dirt with warm water, a mild mended to apply a corrosion pro- detergent, and a soft, clean sponge, tection spray metal, Do not use warm water since it in- and then rinse thoroughly with clean including chrome- and nickel-plat- creases the corrosive action of the...

  • Page 74: Storage

    NOTE: and spark plugs. To prevent corrosion, avoid Consult a Yamaha dealer for advice on b. Pour a teaspoonful of engine oil damp cellars, stables (because what products to use. into each spark plug bore.
  • Page 75 MOTORCYCLE CARE AND STORAGE EWA10950 °C (90 °F)]. For more information WARNING on storing the battery, see page To prevent damage or injury from 6-26. sparking, make sure to ground the NOTE: spark plug electrodes while turning Make any necessary repairs before the engine over.

  • Page 76: Specifications

    SPECIFICATIONS Dimensions: Engine oil: Carburetor: Overall length: Type: Manufacturer: 2190 mm (86.2 in) SAE10W30 or SAE10W40 or SAE15W40 MIKUNI Type × quantity: Overall width: or SAE20W40 or SAE20W50 815 mm (32.1 in) BDS26 x 1 Overall height: Spark plug (s): -20 -10 10 20 30 40 50 ˚C 1140 mm (44.9 in)
  • Page 77 SPECIFICATIONS 3rd: Tire air pressure (measured on cold Operation: 29/23 (1.261) Right foot operation tires): 4th: Front suspension: Loading condition: 26/26 (1.000) Type: 0–90 kg (0–198 lb) 5th: Telescopic fork Front: 23/28 (0.821) Spring/shock absorber type: 175 kPa (25 psi) (1.75 kgf/cm²) Chassis: Coil spring/oil damper Rear:...
  • Page 78 SPECIFICATIONS Front turn signal light: 12 V, 21.0 W × 2 Rear turn signal light: 12 V, 21.0 W × 2 Meter lighting: 14 V, 3.0 W × 1 Neutral indicator light: 14 V, 3.0 W × 1 High beam indicator light: 12 V, 1.7 W ×...

  • Page 79: Consumer Information

    Record the key identification number, vehicle identification number and mod- el label information in the spaces pro- vided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehi- cle is stolen. KEY IDENTIFICATION NUMBER: 1.

  • Page 80: Motorcycle Noise Regulation (For Australia)

    This information b. The use of the vehicle after such will be needed when ordering spare device or element of design has parts from a Yamaha dealer. been removed or rendered inoper- ative by any person.
  • Page 81 INDEX Fuel ............3-5 Fuel cock..........3-6 Air filter element, cleaning ...... 6-9 Rear brake light switch, adjusting ..6-17 Fuel consumption, tips for reducing ..5-3 Rider seat ..........3-8 Fuel tank cap...........3-5 Battery ..........6-26 Fuses, replacing........6-28 Brake and clutch levers, Safety information........
  • Page 82 INDEX Valve clearance ........6-12 Vehicle identification number ....9-1 Wheel bearings, checking..... 6-26 Wheel (front) ......... 6-32 Wheel (rear) .......... 6-33 Wheels ..........6-14...
  • Page 84 YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2005.06-0.3×1 CR...

Table of Contents