Table of Contents
Quick Links
20V MAX* CORDLESS DRILL
INSTRUCTION MANUAL
CATALOG NUMBER
BDCDD220C
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you can't find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured
under a workload, nominal voltage is 18.
To register your new product, call 1-800-544-6986
or visit www.BlackandDecker.com/NewOwner
Table of Contents
Related Manuals for Black & Decker BDCDD220C
Summary of Contents for Black & Decker BDCDD220C
- Page 1 20V MAX* CORDLESS DRILL INSTRUCTION MANUAL CATALOG NUMBER BDCDD220C Thank you for choosing BLACK+DECKER! PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON. If you have a question or experience a problem with your BLACK+DECKER purchase, go to http://www.blackanddecker.com/instantanswers If you can’t find the answer or do not have access to the Internet, call 1-800-544-6986 from 8 a.m.
-
Page 2: Safety Guidelines - Definitions
SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. - Page 3 Use of dust collection can reduce may cause burns or a fire. d) Under abusive conditions, dust-related hazards. 4) POWER TOOL USE AND CARE liquid may be ejected from the a) Do not force the power tool. Use battery, avoid contact. If contact the correct power tool for your accidentally occurs, flush with application.
-
Page 4: Functional Description
n o ....no load speed and work with approved safety equipment, such as those dust masks that are specially ....Class I Construction designed to filter out microscopic particles. (grounded) • Avoid prolonged contact with dust ....earthing terminal from power sanding, sawing, grinding, ....safety alert symbol drilling, and other construction ....Class II Construction... - Page 5 IMPORTANT SAFETY INSTRUCTIONS Calibre mínimo para cables de extensión FOR BATTERY CHARGERS Volts Longitud total del cable en pies 120V 0-25 26-50 51-100 101-150 SAVE THESE INSTRUCTIONS: This (0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m) manual contains important safety Amperaje instructions for battery chargers. Más No más American Wire Gage •...
-
Page 6: Charging Procedure
charger. DO NOT modify the battery pack transporting individual batteries, make sure in any way to fit into a non-compatible that the battery terminals are protected and charger as battery pack may rupture well insulated from materials that could causing serious personal injury. contact them and cause a short circuit. - Page 7 Delay, suspending charging until the battery allow any liquid to get inside charger. Never has normalized. After this happens, the attempt to open the battery pack for any charger automatically switches to the Pack reason. If the plastic housing of the battery Charging mode.
- Page 8 To insert a drill bit or other accessory: OPERATING INSTRUCTIONS 1. Grasp the rear half of the chuck (4) WARNING: To reduce the risk of with one hand and use your other serious personal injury, turn tool off and hand to rotate the front half (4a) in the disconnect tool from power source before counterclockwise direction, as viewed making any adjustments or removing/...
- Page 9 ON BOARD BIT HOLDER MAINTENANCE A bit holder (9) is built-in to the area just WARNING: To reduce the risk of above the battery pack. serious personal injury, turn tool off and disconnect tool from power source before LED WORK LIGHT making any adjustments or removing/ When drill is activated by pulling the trigger installing attachments or accessories.
- Page 10 LIMITED TWO-YEAR HOME USE received, including interference that may cause undesired operation. WARRANTY NOTE: This equipment has been tested BLACK+DECKER warrants this product for and found to comply with the limits for two years against any defects in material or a Class B digital device, pursuant to workmanship.
-
Page 11: Troubleshooting
TROUBLESHOOTING Problem Possible Cause Possible Solution • Unit will not start. • Battery pack not installed • Check battery pack properly. installation. • Battery pack not charged. • Check battery pack charging requirements. • Battery pack will not • Battery pack not inserted into •...