Hitachi CP-X8170 User Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-X8170
  6. User manual

Hitachi CP-X8170 User Manual

Hide thumbs Also See for CP-X8170:
Table of Contents

Quick Links

Projector
CP-X8170/CP-WX8265/CP-WU8460
User's Manual (detailed)
Operating Guide – Technical
Example of computer signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 768
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
1440 x 900
(continued on next page)
37.9
31.5
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
47.7
49.7
60.0
64.0
80.0
55.9
Rating
85.0
VESA
59.9
VESA
72.8
VESA
75.0
VESA
85.0
VESA
56.3
VESA
60.3
VESA
72.2
VESA
75.0
VESA
85.1
VESA
74.5
60.0
VESA
70.1
VESA
75.0
VESA
85.0
VESA
75.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
75.0
VESA
59.9
VESA
Signal mode
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
1152 x 864 (75Hz)
W-XGA (60Hz)
1280 x 800 (60Hz)
1280 x 960 (60Hz)
SXGA (60Hz)
SXGA (75Hz)
WXGA+ (60Hz)
1
Table of Contents
loading

Related Manuals for Hitachi CP-X8170

Summary of Contents for Hitachi CP-X8170

  • Page 1 Projector CP-X8170/CP-WX8265/CP-WU8460 User's Manual (detailed) Operating Guide – Technical Example of computer signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9...
  • Page 2 VESA Reduced Blanking *1) Supported except for HDMI input. *2) Only for CP-X8170. *3) Only for CP-WX8265 and CP-WU8460. *4) Only for CP-WU8460, but except for HDMI input. NOTE • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer.
  • Page 3 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b)

  • Page 4: Monitor Out

    Connection to the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. ►Only the signal that is input from the COMPUTER IN1 or IN2 can be output from the MONITOR OUT port.
  • Page 5 Connection to the ports (continued) COMPUTER IN2 G/Y, B/Cb/Pb, R/Cr/Pr, BNC jack x5 • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V. sync. signal: TTL level (positive/negative) • Composite sync. signal: TTL level •...
  • Page 6 Connection to the ports (continued) COMPONENT Cb/Pb, Cr/Pr RCA jack x3 • Component video signal, Analog: -Y with composite sync, 1.0±0.1Vp-p, 75Ω terminated -Cb/Pb, 0.7±0.1Vp-p, 75Ω terminated -Cr/Pr, 0.7±0.1Vp-p 75Ω terminated • System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60, 1080p@50/60 S-VIDEO Mini DIN 4pin jack •...
  • Page 7 Connection to the ports (continued) AUDIO IN1, AUDIO IN2 Ø3.5 stereo mini jack • Analog, 47kΩ input impedance AUDIO IN3 AUDIO OUT RCA jack x2 RCA jack x2 • Analog, 47kΩ input impedance • Analog, 1kΩ output impedance CONTROL ① ② ③...

  • Page 8: Remote Control

    Connection to the ports (continued) RJ-45 jack ② ④ ⑥ ⑧ ⑧ ⑥ ④ ② ⑦ ⑤ ③ ① ① ③ ⑤ ⑦ * About the details of network communication, please refer to the Network Guide. Signal Signal Signal USB TYPE A USB TYPE B ④...
  • Page 9 Connection to the ports (continued) To input SCART RGB signal; RCA plugs SCART cable Audio R (plug) Audio L Video SCART connector (jack) To input SCART RGB signal to the projector, use a SCART to RCA cable. Connect the plugs refer to above ex. For more reference, please consult your dealer.
  • Page 10 RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer. For details of RS-232C commands, refer to RS-232C Communication / Network command table (&19). Connection Turn off the projector and the computer.
  • Page 11 RS-232C Communication (continued) Communicaion settings 1. Protocol 19200bps, 8N1 2. Command format ("h" shows hexadecimal) Byte Number Command Header Data Header Data Setting Action Type code size flag code Packet Action Change setting to desired value [(cL)(cH)] (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) by [(bL)(bH)].

  • Page 12: Response Code / Error Code

    RS-232C Communication (continued) 3. Response code / Error code ("h" shows hexadecimal) (1) ACK reply: 06h When the projector receives the Set, Increment, Decrement or Execute command correctly, the projector changes the setting data for the specified item by [Type], and it returns the code. (2) NAK reply: 15h When the projector cannot understand the received command, the projector returns the error code.

  • Page 13: Command Control Via The Network

    Command Control via the Network Command Control via the Network When the projector connects network, the projector can be controlled with RS- 232C commands from the computer with web browser. For details of RS-232C commands, refer to RS-232C Communication / Network command table (&19).
  • Page 14 Command Control via the Network Communicaion Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Configure the following items form a web browser when command control is used. Port Settings Click the [Enable] check box to open [Network Control Port1 (Port: 23)] to use TCP #23.

  • Page 15: Command Control Settings

    Command Control via the Network (continued) Command control settings [TCP #23] 1. Command format Same as RS-232C communication, refer to RS-232C Communicaton command format. 2. Response code / Error code ("h" shows hexadecimal) Four of the response / error code used for TCP#23 are the same as RS-232C Communication (1)~(4).
  • Page 16 Command Control via the Network (continued) 2. Response code / Error code ("h" shows hexadecimal) The connection ID is attached for the TCP#23's response / error codes are used. The connection ID is same as the sending command format. (1) ACK reply: 06h + ××h (××h : connection ID) (2) NAK reply: 15h + ××h (3) Error reply: 1Ch + 0000h + ××h...
  • Page 17 Network Bridge Communication Network Bridge Communication This projector is equipped with NETWORK BRIDGE function. When the projector connects to the computer by wired or wireles LAN communicaton, an external device that is connected with this projector by RS- 232C communication can be controlled from the computer as a network terminal. For details, see the 6.

  • Page 18: Communication Settings

    Network Bridge Communication Communication settings For communication setting, use the COMMUNICATION menu in the OPTION - SERVICE menu Item Condition BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps Data length 8 bit (fixed) PARITY NONE/ODD/EVEN Start bit 1 bit (fixed) Stop bit 1 bit (fixed) Transmission method...
  • Page 19 RS-232C Communication / Network command table RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting code Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00...
  • Page 20 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code LENS MEMORY BE EF 06 00 A0 91 02 00 0D 24 00 00 LENS SHIFT - V LENS MEMORY BE EF 06 00 E4 91 02 00 0E 24...
  • Page 21 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code TOP LEFT BE EF 06 00 02 23 01 00 01 23 00 00 TOP RIGHT BE EF 06 00 92 22 01 00 01 23 01 00 PinP POSITION...
  • Page 22 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 FD D3 02 00 04 20 00 00 CONTRAST Increment BE EF 06 00 9B D3 04 00 04 20 00 00 Decrement BE EF...
  • Page 23 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 08 FE 02 00 90 30 00 00 User GAMMA Increment BE EF 06 00 6E FE 04 00 90 30 00 00 Point 1...
  • Page 24 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code 1 HIGH BE EF 06 00 0B F5 01 00 B0 30 03 00 1 CUSTOM BE EF 06 00 CB F8 01 00 B0 30 13 00 2 MID...
  • Page 25 00 00 Decrement BE EF 06 00 BA 82 05 00 00 21 00 00 V POSITION Execute BE EF 06 00 E0 D2 06 00 02 70 00 00 Reset *) Supported except for CP-X8170. (continued on next page)

  • Page 26: Auto Adjust Execute

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 F1 82 02 00 01 21 00 00 H POSITION Increment BE EF 06 00 97 82 04 00 01 21 00 00 Decrement...
  • Page 27 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code AUTO BE EF 06 00 BA 77 01 00 13 22 00 00 VIDEO BE EF 06 00 2A 76 01 00 13 22 01 00 HDMI 1 FORMAT...
  • Page 28 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code Disable BE EF 06 00 FE 88 01 00 20 21 00 00 PERFECT FIT Enable BE EF 06 00 6E 89 01 00 20 21 01 00 BE EF...

  • Page 29: Installation

    01 30 02 00 FRONT / CEILING BE EF 06 00 37 D2 01 00 01 30 03 00 BE EF 06 00 F4 D2 02 00 01 30 00 00 *) Only for CP-X8170 and CP-WX8265. (continued on next page)
  • Page 30 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code NORMAL BE EF 06 00 D6 D2 01 00 01 60 00 00 STANDBY SAVING BE EF 06 00 46 D3 01 00 01 60 01 00 MODE...
  • Page 31 RS-232C Communication / Network command table (continued) RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 CD CC 02 00 60 20 00 00 VOLUME - Increment BE EF 06 00 AB CC 04 00...
  • Page 32 RS-232C Communication / Network command table (continued) RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code AUDIO IN1 BE EF 06 00 6E DC 01 00 30 20 01 00 AUDIO IN2 BE EF 06 00 9E DC...
  • Page 33 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code AUDIO IN1 BE EF 06 00 D6 DD 01 00 32 20 01 00 AUDIO IN2 BE EF 06 00 26 DD 01 00 32 20 02 00 AUDIO...
  • Page 34 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code TÜRKÇE BE EF 06 00 07 D6 01 00 05 30 0F 00 DANSK BE EF 06 00 A7 DF 01 00 05 30 11 00 ČESKY BE EF...
  • Page 35 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 3B EF 01 00 C0 30 00 00 MyScreen Lock BE EF 06 00 AB EE 01 00 C0 30 01 00 BE EF 06 00...

  • Page 36: Auto Power Off

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code NORMAL BE EF 06 00 BA 78 01 00 23 22 00 00 SOURCE SKIP - SKIP BE EF 06 00 2A 79 01 00 23 22 01 00...
  • Page 37 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code SLIDESHOW BE EF 06 00 9A 2B 01 00 00 36 22 00 MY IMAGE BE EF 06 00 5A 3D 01 00 00 36 16 00 MESSENGER...
  • Page 38 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code SLIDESHOW BE EF 06 00 22 2A 01 00 02 36 22 00 MY IMAGE BE EF 06 00 E2 3C 01 00 02 36 16 00 MESSENGER...
  • Page 39 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 FF 32 01 00 00 26 00 00 REMOTE BE EF 06 00 6F 33 01 00 00 26 01 00 RECEIV.

  • Page 40: Pjlink Command

    PJLink command PJLink command Commands Control Description Parameter or Response 0 = Standby POWR Power Contorol 1 = Power On 0 = Standby 1 = Power On POWR ? Power Status inquiry 2 = Cool Down 11 = COMPUTER IN1 12 = COMPUTER IN2 21 = COMPONENT 22 = S-VIDEO...
  • Page 41 Responds with the name set in the item NAME ? Projector Name inquiry PROJECTOR NAME of the NETWORK menu Manufucturer's Name INF1 ? HITACHI inquiry CP-X8170 CP-WX8265 INF2 ? Model Name inquiry CP-WU8460 Responds with the factory information and so INFO ? Other Information inquiry...

This manual is also suitable for:

Cp-wx8265Cp-wu8460

Table of Contents