LG 32SM5C Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Led display
  5. 32SM5C
  6. Owner's manual
LG 32SM5C Owner's Manual

LG 32SM5C Owner's Manual

Digital signage (monitor signage)
Hide thumbs Also See for 32SM5C:
Table of Contents

Quick Links

OWNER'S MANUAL
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it
for future reference.
32SM5C
55SM5C
43SM5C
65SM5C
49SM5C
www.lg.com
Table of Contents
loading

Related Manuals for LG 32SM5C

Summary of Contents for LG 32SM5C

  • Page 1 OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 32SM5C 55SM5C 43SM5C 65SM5C 49SM5C www.lg.com...

  • Page 2: Table Of Contents

    - Connecting the Speakers ..........18 - Connecting the IR Sensor .........21 - Portrait Layout ..............22 - Attaching and removing the LG Logo Bracket ............23 - Installing on a Wall ............25 REMOTE CONTROL ....28 MAKING CONNECTIONS ... 30 - Connecting to a PC............30 - External Device Connection ........30...

  • Page 3: Safety Precautions

    WARNING - This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. SAFETY PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
  • Page 4 If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station), failure to do so will invalidate the warranty.

  • Page 5: Precautions To The Ac Adapter And Electrical Power

    - If loosely connected, the poor connection may cause a fire or electric shock. • Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc. - The use of non-approved products may cause a fire or electric shock.
  • Page 6 • If you don’t intend to use the product for a long time, unplug the power cable from the product. - Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. • Fix the power cable completely. - If the power cable is not fixed completely, a fire can break out.

  • Page 7: Precautions In Moving The Product

    Precautions In Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. •...

  • Page 8: Precautions In Using The Product

    Precautions In Using the Product WARNING • Do not disassemble, repair or modify the product at your own discretion. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. • When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. •...

  • Page 9: Mounting On A Wall

    • Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining. CHEMICALS WATER • Do not use products using high voltage around the Monitor. (e.g., a bug zapper) - Monitor may have malfunction as its electrical shock.

  • Page 10: Licenses

    LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

  • Page 11: Assembly And Preparation

    • SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest software for your model. • The warranty will not cover any damage caused by using the product in an excessively dusty environment.

  • Page 12: Optional Accessories

    The illustrations in this manual may differ from the actual product and accessories. Stand kit Screws Diameter 4.0 mm x Pitch 0.7 mm Stand Spacers Stand Length Model Quantity 32SM5C (including ST-322T 32SM5C spring washer) 43SM5C ST-432T 43SM5C 32SM5C...
  • Page 13 Media Player kit (It may not be supported depending on the model.) Media Player Screws CD (Owner's Manual)/ Cards MP500/ MP700 OPS kit KT-OPSA Screws Connecting Cable Card (Easy Setup Guide) Power Cord Pixel sensor kit KT-SP0 NOTE • Cable holder/cable tie may not be available in some areas or for some models. •...

  • Page 14: Parts And Buttons

    Parts and Buttons The image may be different according to the model. Buttons • INPUT: Changes the input source. MENU: Accesses the main menus, or saves your input and exits the menus. • • : Adjust the up and down. •...

  • Page 15: Assembling The Memory Cover

    Assembling the Memory Cover Assemble the cover with a screw as illustrated to prevent the USB memory from theft.

  • Page 16: Connecting The Stand

    Connecting the Stand - For certain models only. - The image may be different according to the model. 32SM5C...
  • Page 17 43/49/55/65SM5C...

  • Page 18: Connecting The Speakers

    - For certain models only. - The image may be different according to the model. 32SM5C Connect an input signal cable before installing the speakers. Mount the speakers by using screws as shown below. Make sure the power cable is disconnected before making a connection.
  • Page 19 Then connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables. Basic installation Installation with OPS connected...
  • Page 20 43/49/55/65SM5C Connect an input signal cable before installing the speakers. Mount the speakers by using screws as shown below. Make sure the power cable is disconnected before making a connection. Then connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables.

  • Page 21: Connecting The Ir Sensor

    Connecting the IR Sensor When you connect the cable to the product, the feature for receiving remote control signals is activated. Rotate the IR sensor according to the screen orientation (Landscape/Portrait). - The image may be different according to the model. Basic installation [Front] [Rear]...

  • Page 22: Portrait Layout

    Portrait Layout When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen). Using Kensington Lock (This is not available for all models.) The Kensington security system connector is located at the back of the monitor. For more information on installation and use of this system, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.

  • Page 23: Attaching And Removing The Lg Logo Bracket

    LG Logo Bracket to the bottom rear of the monitor. LG Logo Bracket After removing the screw, remove the LG Logo Bracket. When re-attaching the LG Logo Bracket, repeat the process in reverse order.
  • Page 24 LG Logo Bracket to the bottom rear of the monitor. After removing the screw, remove the LG Logo Bracket. Attach the LG Logo Bracket with a screw, aligning it with the hole on the right side.

  • Page 25: Installing On A Wall

    Screws which are longer than standard length may damage the inside of the monitor. A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents related to the use of non-standard screws.
  • Page 26 Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock. • If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount and contact your local dealer or qualified personnel to assist with the installation.
  • Page 27 Securing the monitor to a wall (optional) (Procedure may differ depending on the model.) Insert and tighten the eyebolts, or brackets and bolts on the back of the monitor. - If there are already bolts inserted in the eyebolts’ position, remove the other bolts first. Mount the wall brackets with the bolts to the wall.

  • Page 28: Remote Control

    REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
  • Page 29 PSM Selects the Picture Mode. HOME Activates the Launcher. W.BAL Enters the White Balance menu. SETTINGS Accesses the main menus or saves your input and exit menus. S.MENU SuperSign menu key. Navigation Buttons Scrolls through menus or options. OK Selects menus or options and confirms your input. BACK Allows you to move back one step in the user interaction function.

  • Page 30: Making Connections

    MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided.
  • Page 31 NOTE • For the best image quality, using the monitor with HDMI connection is recommended. • To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a D-sub 15-pin cable and DVI-D/HDMI cable. •...

  • Page 32: Using The Input List

    Using the Input List HOME → • RGB → HDMI → DVI-D → DISPLAYPORT → OPS...

  • Page 33: Troubleshooting

    TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Does the “Invalid Format” message • The signal from the PC (Graphics card) is out of the vertical or appear? horizontal frequency range of the product.
  • Page 34 After-image appears on the product. Problem Action After-image appears when the product is • If you use a fixed image for a long time, the pixels may be damaged. turned off. Use the screen-saver function. • When a dark image is displayed on the screen after an image with high contrast (black and white or gray), this may cause image sticking.
  • Page 35 CAUTION • Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image.

  • Page 36: Product Specifications

    PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen Video signal Maximum resolution...
  • Page 37 32SM5C LCD screen Pixel pitch 0.36375 mm (H) x 0.36375 mm (V) Power Rated power AC 100-240 V ~ 50/60 Hz 1.4 A Power consumption On Mode: 60 W (Typ.) Sleep Mode (RGB, DVI-D, HDMI): ≤ 1.0 W Sleep Mode (DisplayPort): ≤ 0.5 W Off Mode: ≤...
  • Page 38 55SM5C LCD screen Pixel pitch 0.630 mm (H) x 0.630 mm (V) Power Rated power AC 100-240 V ~ 50/60 Hz 1.1 A Power consumption On Mode: 100 W (Typ.) Sleep Mode (RGB, DVI-D, HDMI): ≤ 1.0 W Sleep Mode (DisplayPort): ≤ 0.5 W Off Mode: ≤...
  • Page 39 Wireless module(LGSBW41)Specifications Wireless LAN (IEEE 802.11a/b/g/n) Frequency range (MHz) Output power (Max.) 2400 to 2483.5 16 dBm 5150 to 5250 16 dBm 5725 to 5850 (Not for EU) 11.5 dBm Bluetooth Frequency range (MHz) Output power (Max.) 2400 to 2483.5 10 dBm •...
  • Page 40 RGB (PC) Support Mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 720 x 400 31.468 70.8 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 60.0 1280 x 720 44.772 59.855 1600 x 900 1280 x 1024 63.981 60.02 1680 x 1050...
  • Page 41 HDMI/ DisplayPort/ OPS (DTV) Support Mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 480/60p 31.5 576/50p 31.25 720/50p 37.5 720/60p 1080/50i 28.1 1080/60i 33.75 1080/50p 56.25 1080/60p 67.5 NOTE • PC resolutions available for the Input Label option in RGB / HDMI / DVI-D / DisplayPort input modes: 640 x 480/60 Hz, 1280 x 720/60 Hz, 1920 x 1080/60 Hz;...
  • Page 42 Refer to ENERGYSTAR.gov for more information on the ENERGY STAR® program. NOTE • 32SM5C is not certified with EPA’s ENERGY STAR. Make sure to read the Safety Precautions before using the product. The model and serial numbers of the SET are located on the back and one side of the SET.

This manual is also suitable for:

43sm5c49sm5c55sm5c65sm5c

Table of Contents