DeWalt DCD730 Manual
Hide thumbs
Also See for DCD730:
- Original instructions manual (196 pages) ,
- Instructions manual (157 pages) ,
- Manual (48 pages)
Table of Contents
Quick Links
Table of Contents
Related Manuals for DeWalt DCD730
Summary of Contents for DeWalt DCD730
- Page 1 DCD730 DCD735 DCD780 DCD785 www.
- Page 2 Figure 1 Figure 2...
- Page 3 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9...
-
Page 4: Technical Data
EN GL IS H CORDLESS COMPACT 13 mm (1/2") DRILL/DRIVER DCD730, DCD780 CORDLESS COMPACT 13 mm (1/2") DRILL/DRIVER/ HAMMERDRILL DCD735, DCD785 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users. -
Page 5: Defi Nitions: Safety Guidelines
EN GLI SH Vibration emission value a Screwdriving m/s² < 2.5 < 2.5 h,ID Uncertainty K = m/s² The vibration emission level given in this information An estimation of the level of exposure to sheet has been measured in accordance with a vibration should also take into account standardised test given in EN 60745 and may be the times when the tool is switched off... -
Page 6: Ec Declaration Of Conformity
2) ELECTRICAL SAFETY Power tool plugs must match the outlet. Never modify the plug in any way. Do DCD730, DCD735, DCD780, DCD785 not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs WALT declares that these products described... - Page 7 EN GLI SH Remove any adjusting key or wrench Use the power tool, accessories and before turning the power tool on. A tool bits etc., in accordance with these wrench or a key left attached to a rotating instructions taking into account the part of the power tool may result in personal working conditions and the work to injury.
-
Page 8: Residual Risks
EN GL IS H • Wear safety goggles or other eye protection. Important Safety Instructions for All Hammering and drilling operations cause chips Battery Chargers to fly. Flying particles can cause permanent eye damage. SAVE THESE INSTRUCTIONS: This manual contains important safety and operating instruc tions •... -
Page 9: Charging Process
EN GLI SH • Do not use an extension cord unless it 2. Insert the battery pack (j) into the charger, is absolutely necessary. Use of improper making sure the pack is fully seated in the extension cord could result in risk of fire, charger. -
Page 10: Important Safety Instructions For All Battery Packs
Battery Pack • DO NOT splash or immerse in water or other BATTERY TYPE liquids. The DCD730 and DCD735 operate on 14.4 volt • Do not store or use the tool and battery battery packs. pack in locations where the temperature The DCD780 and DCD785 operate on 18 volt may reach or exceed 40 ˚C (105 ˚F) (such as... -
Page 11: Package Contents
EN GLI SH 3 Li-Ion battery packs (M3, L3, C3 models) 1 Li-Ion battery pack (M1, L1, C1 models) Read instruction manual before use. 1 Kitbox 1 Instruction manual Charging. 1 Exploded drawing NOTE: Battery packs, chargers and kitboxes are not Fully charged. -
Page 12: Electrical Safety
EN GL IS H Electrical Safety TO INSTALL THE BATTERY PACK INTO THE TOOL HANDLE 1. Align the battery pack (j) with the rails inside the The electric motor has been designed for one tool’s handle (fig. 2). voltage only. Always check that the battery pack voltage corresponds to the voltage on the rating 2. - Page 13 EN GLI SH NOTE: The first time the tool is run after changing and disconnect tool from power source the direction of rotation, you may hear a click on when changing acces sories. start up. This is normal and does not indicate a WARNING: Always ensure the bit problem.
- Page 14 EN GL IS H To move belt hook or bit clip, remove the screw 4. Always apply pressure in a straight line with the (h) that holds it in place then reassemble on the bit. Use enough pressure to keep drill biting, but opposite side.
-
Page 15: Maintenance
EN GLI SH NOTE: A smooth, even flow of dust from the hole WARNING: Never use solvents or indicates proper drilling rate. other harsh chemicals for cleaning the non-metallic parts of the tool. These Screwdriver Operation (fi g. 6) chemicals may weaken the materials used in these parts. -
Page 16: Rechargeable Battery Pack
EN GL IS H advantage of this service please return your product GUARANTEE to any authorised repair agent who will collect them on our behalf. WALT is confident of the quality of its You can check the location of your nearest products and offers an outstanding guarantee authorised repair agent by contacting your local for professional users of the product. - Page 17 06126-21-1 Richard Klinger Str. 11 Fax: 06126-21-2770 65510 Idstein www.dewalt.de Ελλάς Black & Decker (Ελλάς) Α.Ε. Τηλ: 30 210 8981-616 www.dewalt.gr Στράβωνος 7 & Βουλιαγμένης 159 Service: 30 210 8981-616 Γλυφάδα 16674, Αθήνα Φαξ: 30 210 8983-570 España WALT Tel: 934 797 400 Parque de Negocios “Mas Blau”...