Table of Contents
Table of Contents
Related Manuals for Beko 2012 CXY
Summary of Contents for Beko 2012 CXY
- Page 1 Washing Machine 2012 CXY User’s Manual...
- Page 2 Please read this manual first! Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1 Your Washing Machine Overview ..... . .4 6 Quick instructions for daily Specifications ....5 3 Installation 7 Cleaning and care Removing packaging reinforcement. -
Page 4: Your Washing Machine
Overview 1 - Detergent Drawer 4 - Control Panel 2 - Door 5 - Filter Cap 3 - Top Lid 6 - Height-adjustable feet... -
Page 5: Specifications
Specifications Models 2012 CXY Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net Weight (±4 kg) Electricity (V/Hz.) 220-240 V / 50Hz Total Current (A) Total Power (W) 2000-2350 Spinning cycle (rpm max.) Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. - Page 6 Warnings Please read the following information. • There may be some water in your Otherwise, there may be the risk of machine when you receive it. This is personal injury or material damage. from the quality control process and Moreover, any warranty and reliability is normal. It is not harmful to your commitment will become void. machine. • Some problems you may encounter may be caused by the software. General Safety Press “Start/Pause/Cancel” button for 3 seconds to cancel the program...
- Page 7 are not, call a qualified plumber to drum. Otherwise, there may be the have any necessary arrangements risk of flooding and possible injury carried out. due to the hot water. • Never force open the locked door! The door will be ready to open just a Intended use few minutes after the washing cycle comes to an end.
-
Page 8: Installation
Installation Removing packaging C Keep the transportation safety reinforcement bolts in a safe place to reuse when the washing machine needs to be Tilt the machine to remove the moved again in the future. packaging reinforcement. Remove the C Never move the appliance without packaging reinforcement by pulling the the transportation safety bolts ribbon. -
Page 9: Connecting To The Drain
• The water supply pressure required to run the machine must be 1-10 bar (0,1 – 1,0 MPa). Attach a pressure- reducing valve if the water pressure is higher. • Connect the special hoses supplied with the machine to the water intake valves on the machine. The hose bearing the “red” sign (90°C max) • Models with a single water inlet is the hot water inlet and the hose should not be connected to the hot bearing the “blue” sign (25°C max) is water tap. -
Page 10: Electrical Connection
after laying it on the floor level or unless it is repaired! There is the risk close to the ground (less than of electric shock! 40 cm above the ground), water Destroying the packaging discharge becomes more difficult and the laundry may come out wet. material Therefore, the heights described in Packaging material can be dangerous to the figure should be followed. -
Page 11: Initial Preparations For Washing
Initial preparations for washing Sorting the laundry • Sort the laundry according to type of fabric, colour, and degree of soiling and permissible water temperature. Always follow the advice on the garment labels. Non machine Washing water Wash with Do not wash washable temperature sensitive, short programmes. -
Page 12: Correct Load Capacity
Correct load capacity different types according to the model of your machine. • The maximum load capacity - (I) for prewash depends on the type of laundry, the - (II) for main wash degree of soiling and the washing - (III) siphon Programme you wish to use. – ( ) for softener C The machine adjusts the amount of water according to the amount of laundry placed inside. - Page 13 the quantities recommended on package. the package to avoid problems • Never use fabric softener and starch of excessive foam, poor rinsing, together in the same washing cycle. financial savings and finally, • Wipe the inside of the drum after environmental protection. using starch. • Use small amounts of detergent at a Eliminating lime formation suitable measure for small amounts • When required, use only appropriate of laundry or for only slightly soiled lime removers developed specifically...
-
Page 14: Selecting A Program And Operating Your Machine
Selecting a Program and Operating Your Machine Control panel 7 - On/Off Button 8 - Door Indicator * 9 - Program Follow-up Indicator 10 - Spin Speed Adjustment Knob * 11 - Temperature Adjustment Knob * 12 - Program Selection Knob 13 - Auxiliary Function Keys 14 - Start/Pause/Cancel Button * According to your machine’s model... -
Page 15: Turning The Machine On
Turning the machine on C Always select the lowest required temperature. Higher temperature You can prepare the machine for means higher power consumption. program selection by pressing the C For further program details, see, the “On/Off” button. When the “On/ “Program Selection Table” Off” button is pressed, the “Lid” light illuminates indicating that the door is Main programs unlocked. Press the “On/Off” button Depending on the type of textile, the again to shut down the machine. -
Page 16: Spin Speed Selection
make intermediate spinning compared spin in the maximum possible rpm in the to the synthetic program. It must be default setting of the selected program. used for clothes for which sensitive washing is recommended. • Elde Yıkama (Hand wash) You can wash your woolen/delicate clothes that bear “not machine- washable” labels for which hand wash is recommended on this program. -
Page 17: Program Selection And Consumption Table
Program selection and consumption table Auxiliary functions Programme Pamuklu 1.65 • • • • • • Pamuklu 60** 0.85 • • • • • • Pamuklu 0.69 • • • • • • Eko 40 0.78 • • • Sentetik 0.92 •... -
Page 18: Auxiliary Functions
Auxiliary functions Cancel” button for 3 sec. • In the machines equipped with spin Auxiliary function selection keys speed selection knob or button, you • Desired auxiliary function depending can spin by selecting the desired on the program is selected. spin speed and press “Start/Pause/ • Some combinations cannot be Cancel” button. selected together. • As for machines not equipped with • Warning signal on the selected a spin speed selection knob, you... -
Page 19: Changing The Program After The Program Has Started
up indicator illuminates when “Start/ Press “Start/Pause/Cancel” button to Pause/Cancel” button is pressed after start the program. selecting the washing program. The C The program which is selected “Program finished” lamp illuminates and the “Wash” light will fade when the first will go on even if the program program comes to an end. The “Lid” selection button is moved and light flashes. Meanwhile, the door will another program mode is selected stay locked for your safety and when it while the machine is operating. You is safe to open, the “Lid” and “Program... -
Page 20: Child-Proof Lock
light up continuously at the end of this • “Lid” lamp will light up continuously time, the water level in the machine when the door is unlocked. You can is not suitable and laundry cannot be select and start a new program. added. You can resume the program • If the program is cancelled in the by pressing the “Start/Pause/Cancel” middle of the process, “Wash” button again. and “Program Finished” lights will light up. The machine can drain Child-proof lock all the water or can take in water for 3 times at most to cool down... -
Page 21: Quick Instructions For Daily Use
Quick instructions for daily use Preparation during a later step only if the water 1. Turn the tap on completely. Check if level is low enough to open the the hoses are connected tightly. loading door or if the temperature in 2. Place the laundry in the machine. - Page 22 After the program is finished 1. “Program finished” lamp will light up on the program follow-up indicator. The lid can be opened after 2 minutes when the “Program Finished” and “Lid” lamps light up continuously. 2. Press the On/Off button to shut down the machine. 3. Turn the water tap off. 4. Eliminate any folding of the rubber seal on the loading door and check for impurities.
-
Page 23: Cleaning And Care
Cleaning and care Detergent drawer such cases: Clean the drum with a stainless steel Remove any powder residue buildup in cleaning agent. Never use steel wool the drawer. To do this; or wire wool. 1. Press the dotted point on the siphon in the softener compartment and pull Outer cabinet and control towards you until the compartment panel is removed from the machine. -
Page 24: Draining Any Remaining Water And Cleaning The Pump Filter
• Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under streaming water. • Replace the gaskets and filters carefully and tighten the hose nuts by hand. Draining any remaining water If it is composed of one piece, hold it and cleaning the pump filter from both sides and open it by pulling Filter system in your machine prevents out. - Page 25 the container by pulling out the plug into their positions and pushing the at the end of the hose. If the amount upper part of it. of water to be drained off is greater than the volume of the container, replace the plug, pour the water out, then resume the draining process.
- Page 26 Solution suggestions for problems Cause Explanation / Suggestion Programme cannot be started or selected. Machine may have switched to self Bring your machine to factory settings by turning protection mode due to an infrastructure the Programme selection knob. (see, Ending the problem (such as line voltage, water Programme through Cancelling) pressure, etc.). Water in the machine. There may be some water in your machine when you receive it.
- Page 27 The door is jammed. - Water level might be above the lower level of the door. - Machine might be heating up the water - Run either the “Pump” or “Spin” Programme. or it may be at the spinning cycle. - Wait until the process is over. - Due to an electrical mechanism, the door - Wait until the process is over.
- Page 28 It continuously washes. Remaining time does not count down. - The machine will wait until there is sufficient amount of water to avoid poor washing results In the case of a paused countdown while due to lack of water. Then the timer will start to taking in water: count down.
- Page 29 - Washing performance is poor: Oily stains appear on laundry. - Washing performance is poor: Bad odour - Such odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/or in short Programmes. - Oily accumulations on the drum may - Leave the detergent dispenser drawer as well have stuck to the laundry. as the loading door of the machine ajar after - Oily accumulations on the drum may each washing.
- Page 30 Clothes do not smell like the softener. - If the water hardness is higher, using insufficient amount of detergent can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water - Insufficient amount of detergent used. hardness. - The detergent was placed into the wrong - If detergent is put in the prewash compartment compartment; the detergent was mixed although prewash cycle is not selected, machine...
- Page 31 The plug might not be Plug should be checked. plugged in the mains outlet. Fuse may have blown. Fuse should be checked. Machine does work. No light is on. Electricity may be cut off. Power should be checked. The “On/Off” button might This button must be pressed. have not been pressed. The machine did not start after the program was selected and the The front door may be ajar.