Related Manuals for Bosch rexroth ctrlX HMI DE0015
Summary of Contents for Bosch rexroth ctrlX HMI DE0015
- Page 1 Operating Manual ctrlX HMI DE0015, DE0021 Multi-Touch Displays (Housing Devices) R911405731, Edition 03...
- Page 2 Copyright © Bosch Rexroth AG 2021 All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Liability The specified data is intended for product description purposes only and shall not be deemed to be a guaranteed characteristic unless expressly stipulated in the contract.
-
Page 3: Table Of Contents
E-STOP button ..........R911405731, Edition 03 Bosch Rexroth AG... - Page 4 10.6.3 Removing internal components ......34 Bosch Rexroth AG R911405731, Edition 03...
- Page 5 16.3 Packaging............46 17 Service and support Index R911405731, Edition 03 Bosch Rexroth AG...
-
Page 6: About This Documentation
Fig. 1: Assigning the present documentation to the target groups, product phases and activities of the target group This document instructs the technical staff of the machine manufacturer on how to safely perform the mechanical and electrical installation and on how to commission the device. Bosch Rexroth AG R911405731, Edition 03... -
Page 7: Purpose
Customer requests, comments or suggestions for improvement are of great importance. Please email your feedback on the documentations to [email protected]. Directly insert ⮫ comments into the electronic PDF document and send the PDF file to Bosch Rexroth. R911405731, Edition 03 Bosch Rexroth AG... -
Page 8: Product Identification And Scope Of Delivery
SN: 123456789123456 Plant (7260) Manufacturing date MD: 17W40 Name of origin Made in... Company address Bosch Rexroth AG, 97816 Lohr, Germany CE conformity marking Rexroth barcode Test marking I-V-C-B-T-V Voltage specification Un DC 24 V Current specification In 1.5 A Ambient temperature T(amb) 0-55 °C... -
Page 9: Explaining Signal Words And The Safety Alert Symbol
If this symbol is on your device, you have to observe the documentation on the device. The respective documentation informs on the type of hazard as well as the steps required to avoid this hazard. R911405731, Edition 03 Bosch Rexroth AG... -
Page 10: Intended Use
Intended use General information on the intended use The Bosch Rexroth operator displays are passive operator and visualization terminals. They form a PC-based operator terminal when used with a Bosch Rexroth control cabinet PC. Risk of damaging the device if not expressly stated accessories, mounting NOTICE parts and other components, cables, lines, software and firmware are used. -
Page 11: Spare Parts, Accessories And Wear Parts
R911170154 Length: 25 m RKB0008/030,0 (*******-*******-*******) R911171381 Length: 30 m RKB0008/035,0 (*******-*******-*******) R911171369 Length: 35 m RKB0008/040,0 (*******-*******-*******) R911171382 Length: 40 m RKB0008/050,0 (*******-*******-*******) R911171383 Length: 50 m RKB0008/055,0 (*******-*******-*******) R911173779 Length: 55 m R911405731, Edition 03 Bosch Rexroth AG... -
Page 12: Usb Connecting Cables (Usb 2.0)
R911404270 Adapter for tube mounting for the Rittal program “CP40” or the Bernstein pro- gram "CS-480 B.Flex". For matching couplings, refer to ⮫ Chapter 5.6.1 “Housing coupling for VAS09.1-002- NNN-N ” on page 13 Bosch Rexroth AG R911405731, Edition 03... -
Page 13: Housing Coupling For Vas09.1-002-Nnn-N
13 / 52 Ambient conditions of the ctrlX HMI 5.6.1 Housing coupling for VAS09.1-002-NNN-N The matching housing couplings for our support arm adapters cannot be ordered at Bosch Rexroth. Contact the mentioned manufacturers. Table 10: Housing coupling for VAS09.1-002-NNN-NN Ordering code... -
Page 14: Technical Data
Table 13: Service life value of the E-STOP button Mechanics Electrics B10: 65000 B10: 18922161 B10d = 130000 B10d = 37844322 Exclusion of failure at <6.050 switching cycles Exclusion of failure at <6.050 switching cycles Bosch Rexroth AG R911405731, Edition 03... -
Page 15: Optical Characteristic Values
EU directive and the following harmonized European standards: EMC directive 2014/30/EU The electronic products described in the present instructions are intended for use in industrial environ- ments and comply with the following requirements: R911405731, Edition 03 Bosch Rexroth AG... -
Page 16: Fcc
UL marking on the device. Loss of UL/CSA conformity due to modifications at the device UL and CSA marking applies only to the device upon delivery. After modifying the device, verify the UL and the CSA conformity. Bosch Rexroth AG R911405731, Edition 03... -
Page 17: Interfaces
NOTICE Use only shielded cables and metallic or conductive connector/coupling covers with large-area shield support. PC voltage supply X1S1 The DC 24 V voltage supply for the display is connected via the “X1S1” connection. R911405731, Edition 03 Bosch Rexroth AG... -
Page 18: Usb Interfaces Xusb
The long distance interface “XCDI+rx” connects the operator display DR to the long distance XCDI+tx interface of a control cabinet PC. XHDMI The HDMI interface "XHDMI” connects the operator display DE to the HDMI interface of a control cabinet PC. Bosch Rexroth AG R911405731, Edition 03... -
Page 19: Interface Keypad
HMI DE0015, DE0021 19 / 52 Interface keypad Interface keypad Fig. 5: USB interfaces CN1 to CN4 of the keypad Fig. 6: E-STOP button and pushbutton S2, S3 and S4 R911405731, Edition 03 Bosch Rexroth AG... -
Page 20: Overview
6-pin, MCV 1,5/6-G-3,5 6-pin, FK-MCP 1,5/6- ST-3,5 Keypad connection Phönix pin contact strip, Phönix socket strip, 10-pin, MCV 1,5/10- 10-pin, FK-MCP 1,5/10- G-3,5 ST-3,5 9.8.2 Keypad connection scheme LED4 LED2 NOT-HALT Fig. 7: Keypad connection diagram Bosch Rexroth AG R911405731, Edition 03... -
Page 21: Pin Assignment Of The Keypad
Mechanical damage due to incorrect mounting torque. NOTICE Tighten the screws and nuts with the corresponding torque according to the following table. Table 20: Tightening torque Thread Tightening torque M2.5 0.4 Nm 0.7 Nm 1.4 Nm 2.8 Nm 3.0 Nm R911405731, Edition 03 Bosch Rexroth AG... -
Page 22: Housing Dimensions Of The Display
The provided screws can be used for VESA fastenings up to a material thickness of 1.0 mm. Use longer screws for VESA fastenings with a greater material thickness! Bosch Rexroth AG R911405731, Edition 03... - Page 23 Attach the support arm with four M4 screws at the support arm adapter. Fig. 9: Support arm at adapter ① Support arm ② Adapter ③ Marking for the alignment towards the top ④ Four M4 screws R911405731, Edition 03 Bosch Rexroth AG...
- Page 24 Screw two M5 screws into the upper bolt holes on the rear side of the device. Fig. 10: Two M5 screws for the support arm adapter Hang the device into the support arm adapter. Fig. 11: Hanging the device into the support arm adapter Bosch Rexroth AG R911405731, Edition 03...
- Page 25 Device mounting of the display Fasten the support arm adapter in the lower bolt holes with two M5 screws. 0.5 ... 1 mm 0.5 ... 1 mm Fig. 12: Fastening the support arm adapter R911405731, Edition 03 Bosch Rexroth AG...
- Page 26 5 Route the cables through the cable bushing of the cover and fasten the cover with four M5 screws. Fig. 13: Cable bushing 6 Close the cable bushing with three M5 screws. Attach the routing frame to the display with two M5 screws. Fig. 14: Routing Bosch Rexroth AG R911405731, Edition 03...
- Page 27 Device mounting of the display Tighten the housing cover with six M3 screws. Fig. 15: Tightening the housing cover 8 Remove the VESA support arm fixture from the upper mounting position and hang it into the lower screws. R911405731, Edition 03 Bosch Rexroth AG...
- Page 28 28 / 52 ctrlX HMI DE0015, DE0021 Device mounting of the display Fig. 16: Rehanging the support arm adapter Remove the upper screws and screw them into the lower bolt holes of the support arm adapter. Bosch Rexroth AG R911405731, Edition 03...
-
Page 29: Fastening To An Adapter For The Tube Mounting With Vas09.1-002
The adapter for the tube mounting is intended to be mounted at the lower housing cover. If you attach the device to the adapter, ensure that the screws used are suitable for the device weight. Mount the adapter for the tube mounting as follows: R911405731, Edition 03 Bosch Rexroth AG... - Page 30 1 Loosen the four screws of the plastic cover and the six M3 screws of the housing cover on the rear side of the device. Fig. 18: Removing the cover Loosen the four M3 screws of the adapter cover. Fig. 19: Removing the adapter cover Bosch Rexroth AG R911405731, Edition 03...
- Page 31 4 Tighten the adapter cover with four M3 screws, see Fig. 19 “Removing the adapter cover” on page Route the connecting cable through the fixture and fasten the device with four M5 screws. standing mounting Fig. 21: Tightening the support arm during R911405731, Edition 03 Bosch Rexroth AG...
-
Page 32: Installation Notes
Keep the maximum distance possible from interference sources 10.5 Dismounting Disconnect the operator display from voltage. Remove all connected cables. Loosen the screws at the support arm fixture. Remove the display from the support arm fixture. Bosch Rexroth AG R911405731, Edition 03... -
Page 33: Device Dismantling For Disposal
Remove the three screws of the board of the E-STOP button. Remove the six screws of the pushbutton board. Rotate the four fastening rings to remove the pushbutton. Remove the three screws of the USB rubber gasket. R911405731, Edition 03 Bosch Rexroth AG... -
Page 34: Removing Internal Components
Remove the four screws of the connection terminal blocks of the keypad. Remove the four screws of the connector panel of the touchscreen. Remove the two screws of the connector panel of the display. Fig. 25: Removing internal components Bosch Rexroth AG R911405731, Edition 03... -
Page 35: Electric Installation
Fig. 26: Wiring the control cabinet PC to the operating display Connection Connect the functional earth. Connect the XCDI+tx interface at the control cabinet PC to the XCDi+rx interface at the respec- tive operating display using a CDI+ cable. R911405731, Edition 03 Bosch Rexroth AG... -
Page 36: Commissioning
PC is optimal. If the functional earth is connected to a neutral point, the display has to be connected to this neutral point as well. When wiring Bosch Rexroth CDI cables with a diameter of 7.4 mm, observe the following bending radii: −... -
Page 37: Commissioning Video And Multi-Touch Operation
USB connection, set the video input via the On-Screen menu on the Displayport (“Input DP”). • “Home” key Open On-Screen menu • Confirm selected menu item • "i” key Navigate in the menu Brightness Input Video Input Input HDMI Input Touch Exit Exit Fig.: R911405731, Edition 03 Bosch Rexroth AG... -
Page 38: Two De Displays At The Control Cabinet Pcs Pr31 And Pr4X
Operating systems and machines requires the implementation of a comprehensive concept for state-of- the-art IT security. Bosch Rexroth products are part of this comprehensive concept. The properties of the Bosch Rexroth products have to be considered for a comprehensive IT Security concept. For the required properties, refer to the IT Security Guideline (⮫... -
Page 39: Device Description
General information Device description 12.1 General information 2 3 4 Fig. 30: Front view ① USB 2.0 interface ② “i” touch key ③ "Home” touch key ④ Status displays ⑤ Three pushbuttons ⑥ E-STOP button R911405731, Edition 03 Bosch Rexroth AG... -
Page 40: On Screen" Menu
To set the video interface used (XCDI+rx, XDP, XHDMI), go to the On Screen menu under the menu item “Video Input”. Brightness Input Video Input Input HDMI Input Touch Exit Exit Fig. 32: On Screen menu – Video Input Bosch Rexroth AG R911405731, Edition 03... -
Page 41: Touch
If the touch function is disabled via “Always Off” or “Off for 60 sec”, the status LED flashes green on the front while it is disabled. 12.3 Operating and error display A status LED is positioned in the lower area of the front plate. R911405731, Edition 03 Bosch Rexroth AG... -
Page 42: Error Causes And Troubleshooting
Connect the display port or CDI+ cables cor- rectly • If panels with display port are used, use only Bosch Rexroth display cables to connect the panels, refer to . • Distorted display due to incorrect display resolu- Set the correct display resolution in the tion graphic driver. -
Page 43: Maintenance
General information Only the maintenance works at the device listed in this chapter are permitted. For further information in the event of repair, please contact the Bosch Rexroth Service. Loss of IP degree of protection due to incorrect maintenance. NOTICE... -
Page 44: Type Code For De Devices
With emergency stop button, 3 push-buttons and USB-Port ........... Hardware configuration 3 k. A................= N Design and HMI-display properties 10 point PCT-touch, Rexroth design horizontal ... = AA Fig. 34: Type code for DE devices Bosch Rexroth AG R911405731, Edition 03... -
Page 45: Type Code For Vas Devices
Furthermore, the products returned for disposal must not contain any undue foreign substances or external components. Send the products free of charge to the following address: Bosch Rexroth AG Electric Drives and Controls Bürgermeister-Dr.-Nebel-Straße 2 97816 Lohr am Main, Germany... -
Page 46: Packaging
46 / 52 ctrlX HMI DE0015, DE0021 Packaging 16.3 Packaging The packaging material consists of cardboard, plastics, wood or styrofoam. Packaging material can be recycled anywhere. For ecological reasons, please do not return empty packages. Bosch Rexroth AG R911405731, Edition 03... -
Page 47: Service And Support
Detailed description of malfunction and circumstances • Type plate specifications of the affected products, in particular type codes and serial numbers • Your contact data (phone and fax number as well as your e-mail address) R911405731, Edition 03 Bosch Rexroth AG... -
Page 48: Index
Purpose....... . . 7 Bosch Rexroth AG R911405731, Edition 03... - Page 49 Warnings....... . 8 Wear parts......11, 13 R911405731, Edition 03 Bosch Rexroth AG...
- Page 50 50 / 52 ctrlX HMI DE0015, DE0021 Bosch Rexroth AG R911405731, Edition 03...
- Page 51 HMI DE0015, DE0021 51 / 52 R911405731, Edition 03 Bosch Rexroth AG...
- Page 52 Bosch Rexroth AG P.O. Box 13 57 97803 Lohr a.Main, Germany Bgm.-Dr.-Nebel-Str. 2 97816 Lohr a.Main, Germany Tel. +49 9352 18 0 Fax +49 9352 18 8400 www.boschrexroth.com/electrics R911405731 R911405731...