Fujitsu BACnet UTY-ABGX Instruction Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Gateway
  5. BACnet UTY-ABGX
  6. Instruction manual
Fujitsu BACnet UTY-ABGX Instruction Manual

Fujitsu BACnet UTY-ABGX Instruction Manual

For vrf system
Hide thumbs
Table of Contents

Quick Links

INSTRUCTION MANUAL
•INSTALLATION
•SETTING
•OPERATING
®
BACnet
Gateway
for VRF System
UTY-ABGX
Ver. 2.1
Part. 9708568010-04
Table of Contents
loading

Related Manuals for Fujitsu BACnet UTY-ABGX

Summary of Contents for Fujitsu BACnet UTY-ABGX

  • Page 1 INSTRUCTION MANUAL •INSTALLATION •SETTING •OPERATING ® BACnet Gateway for VRF System UTY-ABGX Ver. 2.1 Part. 9708568010-04...
  • Page 2 GATEWAY for VRF SYSTEM” License Agreement (“LICENSE AGREEMENT”) is a legal agreement between ® you and Fujitsu General Limited (“FGL”) for the use of VRF BACnet GATEWAY products consisting of computer software and online, electronic and/or printed documentation (collectively “SOFTWARE PRODUCT” or “SOFTWARE”). By installing, copy- ing, or otherwise using the SOFTWARE PRODUCT, you accept to be bound by all of the terms and conditions of this LICENSE AGREEMENT.
  • Page 3 Tokyo District Court and other higher courts having jurisdiction in Japan for the settle- ment of disputes arising under or in connection with this LICENSE AGREEMENT. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 4: Table Of Contents

    “Unit Registration” ····························································································· (8 “Description Property Setting” ·············································································· 41 “Change Password” ··························································································· 42 7. Electricity Charge Apportionment (ECA) Setting ·························································· 43 Basic Setting Flow ···························································································· 4( Overview ········································································································· 44 “Model Name Setting” ························································································ 47 Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 5 American Society of Heating, Refrigerating and Air-Conditioning Engineers, INC (ASHRAE). ® XLON is a registered trademark of DH electronics GmbH. Portions of this software ©2001-2009 PolarSoft Inc. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 6: Usage Precautions

    PC, ® BACnet Gateway may not install or run properly. ® ® Microsoft SQL Server 2005 OpenLDV (U10 USB Network Interface driver) ® Microsoft Visual C++ 2005 SP1 Redistributable WIBU-KEY driver Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 7: How To Use This Manual

    The Appendix is made up of product specifications, error code table, and FAQ. Read them as required. Interface Specification document is also available and should be referred to along with this manual. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 8: Introduction

    Introduction (. Overview 4. Materials To Be Prepared Beforehand...

  • Page 9: Overview

    VRF System, Indoor and Outdoor Units are up to 400 units and up to 100 units respectively. VRF System Address: ® The numbers from 0 to (, which are assigned to each VRF System in the BACnet Gateway. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 10: Materials To Be Prepared Beforehand

    This software is necessary to use WIBU-KEY ® It is usually installed automatically when BACnet Gateway is installed to the PC. When the driver for WIBU-KEY is installed manually, execute it. LicenseAgreement LicenseAgreement.pdf ISSetupPrerequisites Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 11: Installation

    Installation 5. Installation...

  • Page 12: Installation

    This section also describes how to uninstall the software when BACnet Gateway software becomes un- necessary and also, how to reinstall the installed software due to software upgrading or other reasons. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 13: Installation Flow

     Do not turn on the power of indoor/outdoor units until all installation work is completed. Do not insert WIBU-KEY to the USB port of the PC until instructed. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 14: Hardware Installation (Transmission Adaptor)

    Corporation) of connection systems. (Field Supply) It is necessity that set Transmission adaptor respectively because of the S/V series and V-II/J-II series can not be connected to the same communication line. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 15 Connect the U10 USB Network Interface adaptor to the personal computer USB port. When there are multiple U10 USB Network Interface adaptors, connect each U10 USB Network Inter- face adaptor in the order of its LON number. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 16: Wiring And Turning On The Units Power

    Make sure that USB equipment (USB hub, etc.) that this product is connected to, is not overloaded (power sup- plied thru the interface does not exceeds the maximum limit).  ® Turn on the power for BACnet Gateway PC, if it is not yet turned on. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 17: Software Installation

    2005 is installed automatically if it is not already installed. ® ● Microsoft Visual C++ 2005 SP1 Redistributable (Package ATL Security Update) ® Microsoft Visual C++ 2005 SP1 Redistributable is installed automatically if it is not already installed. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 18  Select the language. Select the desired language.  Click the “OK”button.    Click the “Install” button.  Click the “Yes” button. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 19    Specify the installation “Destination Folder” and click the “Next” button. (To change the installation “Destination Folder”, click the “Change” button and select the folder to be installed.)  Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 20  A description of WIBU-KEY Setup is displayed. Confirm the contents. Click the “Next” button.   Select the language. Check the desired language.  Click the “Next” button.   Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 21 “Destination Folder” and click the “Next” button.   Click the “Yes” button.   The WIBU-KEY components selection screen is displayed. Uncheck all the checkboxes and click the “Next” button.  Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 22 If the WIBU-KEY driver installation contents are displayed, confirm the contents and click the “Next” button.   Installation starts. When “Next” button is enabled, click the “Next” button.   WIBU-KEY Setup is complete. Uncheck the checkbox and click the “Finish” button.  Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 23 After the end of installation, reboot the PC. Click the “Yes” button.   After reboot the PC, connect the WIBU-KEY and the U10 USB Network Interface adaptor to USB port of the PC. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 24: Software Uninstallation

    Gateway later, export “All Data” at this point. →8-3-3 “All Data Export” ® 5-4-1 BACnet Gateway Uninstallation 5-4-2 WIBU-KEY Driver Uninstallation ® ® 5-4-3 Microsoft SQL Server 2005 Uninstallation ® ® 5-4-4 Microsoft SQL Server Native Client Uninstallation Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 25: Bacnet ® Gateway Uninstallation

    Gateway remains in the folder designated the BACnet Gateway installation folder at installation even though uninstallation is performed. There is no problem even if this folder remains as is, but it doesn’t matter if the folder is deleted. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 26: Wibu-Key Driver Uninstallation

     Select the menu items in order of “start”→“Control Panel”→“Program and Features”.  Select “WIBU-KEY Setup (WIBU-KEY Remove)”.  Click the “Uninstall/Change” button.    Click the “Next” button.  Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 27 When this screen is displayed, uninstallation of the WIBU-KEY driver is complete. Click the “Finish” button.   Close the “Program and Features” screen by clicking the [x] at the top right-hand corner of the screen. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 28: 2005 Uninstallation

    When [×] is clicked, “SQL Server Configuration Manager” is completed.  Select the menu items in order of “start”→“Control Panel”→“Program and Features”.  Select “Microsoft SQL Server 2005”.  Click the “Uninstall” button.   Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 29 When the screen displaying the uninstallation process closes, uninstallation is complete. When there were items other than those at the processing of on the screen of , do not uninstall  ® ® the “Microsoft SQL Server Native Client”.  Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 30 “Setup Progress” screen is displayed. When ended, the screen automatically closes.  Close the “Program and Features” screen by clicking the [×] at the top right-hand corner of the screen. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 31 ® ® If not inconvenient, do not uninstall “Microsoft .NET Framework 2.0”, and “Microsoft Visual C++ 2005 SP 1 Redistributable” and let it remain as is. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 32: Settings

    Settings 6. Basic Settings 7. Electricity Charge Apportionment (ECA) Setting...

  • Page 33: Basic Settings

    Gateway program ends. program ends. (When Cancel is selected, Setting is stopped. Setting must be repeated from the beginning.) ● Items Which Can Be Arbitrarily Set 6-7 “Description Property Setting” 6-8 “Change Password” Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 34: Selection Of Unit Data Acquisition Method

    (Within 20 characters of alphabet, numeric, and symbol) Password can be changed. See 6-8 Change Password.  Password Confirmation Enter the administrator's Password again for confirmation      Click the “OK” button. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 35: Initial Setting

    Select the menu items in order of “Setting”→“Initial setting” from the Menu bar.   Input or check each item of the screen shown below. Always set “IP Address” and “Subnet Mask". Change other items as required.   Click the “OK” button. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 36 “Register as Foreign Device with BBMD” Check when you register as an external device to BBMD. “BBMD at IP Address” BBMD IP address. “BBMD at UDP Socket” BBMD UDP port No. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 37: Adaptor Setting

    Transmission adaptor (U10 USB Network Interface). (Default name: “AdaptorX”) “Device Name” is a name automatically allocated to the network when a “Transmission adaptor” (U10 USB Network Interface) is connected. (User may select the LONx number) Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 38: Unit Registration

    (for approx. 2 second) and connection of the se- “Check” lected adaptor can be identified. (Effective only when the status of the Transmission adaptor is normal.) Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 39 All systems connected to 1 Transmission adaptor (U10 USB Network Interface) are stopped during scan- ning for secure reg. VRF network list display during scanning When scan ends, “Done” is displayed at the progressive bar display. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 40 (Perform scanning after turning off the power of the unit removed from registration.) “OK” button: Saves the detected unit configuration detected by scanning. “Cancel” button: Ends scanning without saving the scanned result. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 41: Description Property Setting

    Values of description properties of all objects within the selected unit can be modified at once.  Select the menu items in order of “Setting”→“Description Property Setting” from the Menu bar.   Up to 50 characters can be entered.   Click the “OK” button. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 42: Change Password

    (Within 20 characters of alphabet, numeric, and symbol)  Enter the new password again for confirmation.    "OK" button: Saves the new password. "Cancel" button: Ends without saving the revised contents. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 43: Electricity Charge Apportionment (Eca) Setting

    1:When ending electricity charge apportionment data collection 2:When starting electricity charge apportionment data collecting by calculation including in- door units (:When stating electricity charge apportionment data collection by calculation not including indoor units Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 44: Overview

    Even when an indoor unit operation time is zero, the rate (proportion) of the electricity charge ap- portionment is not zero because of the power consumed in the outdoor unit in standby. (11) The apportionment calculation for the electricity charge cannot be performed for air conditioners Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 45 (non-communicating unit) is detected during the period electricity charge apportionment data collection is performed. Judgment, performed for the outdoor unit and the indoor unit, is based on whether there is no communication for more than (0 minutes or not. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 46 When the power breaker of only part of the units in a refrigerant system is switched off, outdoor unit trouble may occur. Therefore, if there is a unit whose power breaker is switched off, quickly recover the power by switching on the breaker. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 47: Model Name Setting

    S/V Series cannot obtain Model Name even by scanning. (This function cannot be used.)  Select the menu items in order of “Setting”→“Model Name Setting” from the Menu bar.   Select “Model Name”.    Click the “OK” button. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 48 Operation 8. Operation...

  • Page 49: Operation

     Enter the Password.     Click the “OK” button. ® When “BACnet Gateway for VRF System” boots up, the main screen is displayed. (Refer to 8-2 Main Screen.) Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 50 Select the menu items in order of “File”→“Exit” from the Menu bar   Enter the Login ID.  Enter the Password.     Click the “OK” button. Click the “OK” button. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 51: Main Screen

    “Indoor Unit” Unit connected to the adaptor selected by [VRF System] menu. “Unit” Displays the Status information of the Outdoor “Outdoor Unit” Unit connected to the adaptor selected by [VRF System] menu. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 52 ® set from a BACnet Device (B-OWS, etc.) This value can be overwritten from B-OWS. VRF System0 BACnet ® Device (B-OWS, etc.) ® (BACnet Gateway) VRF System1 VRF System2 VRF System( Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 53: Data Import/Export

      Specify the Export destination folder and click “OK”. The folder to be saved shall be created in advance.   When “OK” is clicked, the export is complete.  Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 54: All Data Import

    Select the menu items in order of “File”→“Import/Export”→“All Data Import” from the Menu bar.   Enter the Login ID.  Enter the Password.     Click the “OK” button. Specify the file to be imported and click “Open”. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 55: All Data Export

      Specify the export destination folder and click “OK”. The folder to be saved shall be created in advance.   When “OK” is clicked, the export is complete.  Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 56: View

    “Address”   /M Master indoor unit /S Slave controlled by master indoor unit /O Unit controlled by outdoor unit Those without suffixes are units that not any of the aboves. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 57: Control

    Indoor unit “On/Off”, “Operation Mode”, “temperature setting”, and “Fan speed” can be set. Operating procedure  Select indoor unit. Select the menu items in order of “View”→“Unit”→“Indoor Unit” from the Menu bar  Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 58 When the set button is pressed, “On/Off”, “Operation Mode”, “Set Temp. (°C)”, and ”Fan Speed” can be set. Function which cannot be set is not pressed.  “Reset” button: When this button is pressed, returns to the setting state when this screen was displayed. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 59: Device Communication Disable

    Select the menu items in order of “Control”→“Device Communication Disable” from the Menu bar Click the button.   Click the “OK” button on the window of “Disable device communications” shown below.  Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 60: Device Communication Disable_Initiation

    85555 “Device Communication Enable” Description of function Communications is enabled. Operating procedure  Select the menu items in order of “Control”→“Device Communication Enable” from the Menu bar Click the button.  Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 61: Out Of Service

    Select the menu items in order of “Control”→“Out of Service”→“False” from the Menu bar   Click the “OK” button on the window of “All objects will be put in service.” shown below.  Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 62: Error

    The letter ":" is not part of the Model Name. “Adaptor Name” Connected U10 USB Network Interface adaptor name. Displays the address for each unit. Display contents: "Refrigerant system address “Address” "-"Unit address"-"R.C address". “Error Code” Error code “Contents” Contents Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 63: Displays "Error History

    Select the menu items in order of “Help”→“Interface Specification Document” from the Menu bar  “Interface Specification Document” is displayed. 85855 Displays Application “Version Information”  Select the menu items in order of “Help”→“Version Information” from the Menu bar  “Version Information” is displayed. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 64: Appendix

    Appendix 9. Product Specifications 10. Error Code Table 11. FAQ...

  • Page 65: Product Specifications

    USB (Ver.1.1/2.0) port x 1 to 4 (for U10 USB Network Interface)* Ethernet Port Number of USB ports required differs with the number of adaptors connected. Accessories CD-ROM (Application and Manual) ..................(1) USB Software Protection key ....................(1) Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 66: Error Code Table

    Transmission error (data not acquired) External input power meter error Communication between processes error Software protection key not recognized (including fault WIBU-KEY obstruction) Server/client communication error HDD capacity error System requirements error Time error Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 67: Faq

    In addition, scanning by “secure reg.” is faster than scanning “without secure reg.”. → 6-6 “Unit Registration”. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 68 The time given on screen gives a rough estimation. ® ® Windows File Protection error for “msxm16r.dll” in setup of SQL on localized Windows XP SP3 Please refer to web site of the URL (http://support.microsoft.com/kb/958897) Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 69 Characters displayed on the screen are strange. What should I do? Region is not set. Refer to 5-( “Regional Setting” and set the region. OS or PC trouble Contact the manufacturer of your PC. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

  • Page 70: Trouble Shooting Bacnet ® Installation

    If the VRF system itself is not working properly, consult the the Service Manuals for VRF system. ® S2.Communication between BACnet Gateway and VRF system is not normal. If the communication within the VRF system is not working properly, consult the Service Manuals for VRF system. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
  • Page 71 What Service is Malfunctioning? If any service cannot be performed on the B-OWS, then packets must be captured to see where and what has gone wrong. Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.

Table of Contents