Page 1
LK150LED Net Weight: Lbs. Net Weight: Lbs. Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service - 8 a.m. - 6 p.m., Eastern, Monday-Friday 1-800-654-3545 www.emersonfans.com Part No. F40BP75030000 Form No. BP7503 Revision: 151015 ETL Model No.: LK180LED/LK150LED...
Ceiling Fans in indoor locations. This light kit is not to be 2. Be careful of the fan and blades when cleaning, used on Emerson CF Series Ceiling Fans installed in painting, or working near the fan. Before installing or damp or wet locations.
Finial Nuts Emerson Electric Co. Substitution of parts or Hardware Kit: 764731 accessories not designated for use with this product by Emerson Electric Co. could result in personal injury Couplers/Wood Pendants 2 each or property damage. WARNING Before assembling your light fixture, refer to section on proper method of wiring your light fixture.
National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock. 3. Installation on Emerson Fans Having a Modular Switch Cup with Center Screw WARNING Disconnect electrical power to the branch circuit at the circuit breaker or fuse box before attempting to install Turning off wall switch is not sufficient.
Page 5
BP7503 LK150 LK180 10/13/15 3:56 AM Page 5 3. Installation on Emerson Fans Having a Modular Switch Cup with Center Screw (Continued) REMOVE WIRE CONNECTORS (2) Carefully locate the white and blue wires (labeled either "L" or "LIGHT") in the switch cup and remove the wire connectors from the wires (Figure 2).
Page 6
BP7503 LK150 LK180 10/13/15 3:56 AM Page 6 3. Installation on Emerson Fans Having a Modular Switch Cup with Center Screw (Continued) LED LIGHT FIXTURE LED LIGHT FIXTURE ASSEMBLY WHITE ASSEMBLY BLACK Connect the white wire from the switch cup to the white...
Page 7
BP7503 LK150 LK180 10/13/15 3:56 AM Page 7 3. Installation on Emerson Fans Having a Modular Switch Cup with Center Screw (Continued) 3.10 Depending on the fan model, insert the fan speed control switch chain through the offset hole in the glass bowl (Figure 9).
BP7503 LK150 LK180 10/13/15 3:56 AM Page 8 4. Installation on Emerson Fans Having a Two-Piece Die-Cast Switch Housing WARNING Disconnect electrical power to the branch circuit at the circuit breaker or fuse box before attempting to install Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned the light fixture.
Page 9
BP7503 LK150 LK180 10/13/15 3:56 AM Page 9 4. Installation on Emerson Fans Having a Two-Piece Die-Cast Switch Housing (Continued) SWITCH Connect the white wire from the switch cup to the white HOUSING wire of the LED light fixture assembly using the...
Page 10
BP7503 LK150 LK180 10/13/15 3:56 AM Page 10 4. Installation on Emerson Fans Having a Two-Piece Die-Cast Switch Housing (Continued) Depending on the fan model, insert the fan speed control switch chain through the offset hole in the glass bowl (Figure 19).
You will be responsible for all insurance, freight or other transportation charges to our factory or authorized service center. Your Emerson Light Fixture should be properly packed to avoid damage in transit since we will not be responsible for any such damage.
Page 12
10/13/15 3:56 AM Page 12 Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., Eastern, Monday-Friday 1-800-654-3545 www.emersonfans.com...