Page 1 Agilent Technologies. We have made no changes to this manual copy. The HP XXXX referred to in this document is now the Agilent XXXX. For example, model number HP8648A is now model number Agilent 8648A.
Page 2 All manuals and user guides at all-guides.com Operating and Programming Manual HP 8153A Lightwave Multimeter ABCDE...
Page 3 During the warranty incidental, or consequential without the prior written consent of period, HP will, at its option, either damages whether based on contract, Hewlett-Packard GmbH. repair or replace products which tort, or any other legal theory.
Page 4: Safety Considerations
All manuals and user guides at all-guides.com Safety Considerations Warning Line Power Requirements Line Power Cable...
Page 5 All manuals and user guides at all-guides.com Warning...
Page 6 All manuals and user guides at all-guides.com Operating Environment Warning Input/Output Signals Caution...
Page 7 All manuals and user guides at all-guides.com Initial Safety Information for Laser Source Modules > > > > Note Note MUST...
Page 8 All manuals and user guides at all-guides.com MUST Warning Warning Warning Warning...
Page 9 All manuals and user guides at all-guides.com Sicherheitsinformation f ur Laser Quellen > > > > Hinweis viii...
Page 10 All manuals and user guides at all-guides.com Warnung Warnung Warnung Warnung...
Page 11 All manuals and user guides at all-guides.com Informations et Consignes de S ecurit e Relatives a l'Utilisation des Lasers. > > > > Remarque Remarque...
Page 12 All manuals and user guides at all-guides.com Attention Attention Attention Attention...
Page 13 All manuals and user guides at all-guides.com Lasers akerhet Bruksanvisningar Varning...
Page 14 All manuals and user guides at all-guides.com Underh all xiii...
Page 15 All manuals and user guides at all-guides.com Laserturvallisuus K aytt o Varoitus...
Page 16 All manuals and user guides at all-guides.com Huolto...
Page 17 All manuals and user guides at all-guides.com Introduction...
Page 18 All manuals and user guides at all-guides.com Contents Contents-1...
Page 19 All manuals and user guides at all-guides.com Contents-2...
Page 20 All manuals and user guides at all-guides.com Contents-3...
Page 21 All manuals and user guides at all-guides.com Contents-4...
Page 22 All manuals and user guides at all-guides.com < > < > < > < > < > < > < > < > < > Contents-5...
Page 23 All manuals and user guides at all-guides.com Contents-6...
Page 24 All manuals and user guides at all-guides.com Contents-7...
Page 25 All manuals and user guides at all-guides.com Contents-8...
Page 26 All manuals and user guides at all-guides.com Contents-9...
Page 27 All manuals and user guides at all-guides.com Contents-10...
Page 28 All manuals and user guides at all-guides.com Contents-11...
Page 29 All manuals and user guides at all-guides.com Figures Average Contents-12...
Page 30 All manuals and user guides at all-guides.com Average > Average > Average Contents-13...
Page 31 All manuals and user guides at all-guides.com Tables STATus STATus STATus DISPlay SENSe SOURce SYSTem PROGram STATus STATus Contents-14...
Page 32: Getting Started
All manuals and user guides at all-guides.com Getting Started The HP 8153A System Getting Started 1-1...
Page 33 All manuals and user guides at all-guides.com A Quick Overview The Keyboard Chan Mode Chan Mode Measure Mode Param 1-2 Getting Started...
Page 34 All manuals and user guides at all-guides.com Disp dBm/W Zero N Dig Auto Down Menu Mode Edit Prev Next Exec Pause System Loss Loss Getting Started 1-3...
Page 35 All manuals and user guides at all-guides.com Record T_TOTAL AUTODUMP SAMPLES AUTODUMP START THRESHLD Exec AUTOSCAL Y_MIN Y_MAX COMMENT More 1-4 Getting Started...
Page 36 All manuals and user guides at all-guides.com TYPE DELTA MAXPOWER Pause Getting Started 1-5...
Page 37 All manuals and user guides at all-guides.com The Display NNNNNNNN NNNNNNNNNNNNNN Mode NNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN TLK ONLY NNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN Low Batt 1-6 Getting Started...
Page 38 All manuals and user guides at all-guides.com A/REF B/REF AUTO APPL EDIT PAUSE NNNNNNNNNNNNNNNNN Param Getting Started 1-7...
Page 39: A Sample Session
All manuals and user guides at all-guides.com A Sample Session Hardware Setup Switching On and Recalling the Standard Setting SELFTEST 1-8 Getting Started...
Page 40 All manuals and user guides at all-guides.com MENU Mode MENU MENU SYS System RECALL MENU SYS EDIT Edit RECALL Exec RECALL Exec Mode Making A Power Measurement Note Getting Started 1-9...
Page 41 All manuals and user guides at all-guides.com Param Zero ZEROING ---- 1-10 Getting Started...
Page 42: Logging Data
All manuals and user guides at all-guides.com Logging Data Menu MENU MENU APPL Record STABILTY Record LOGGING Getting Started 1-11...
Page 43: Examining The Data
All manuals and user guides at all-guides.com EDIT Edit SAMPLES AUTODUMP Next START Next IMMEDIAT LOGGING Edit Exec Examining the Data SHOW More MAXIMUM Edit MINIMUM Next DIFF Next AVERAGE Next Next 1-12 Getting Started...
Page 44: Plotting Data
All manuals and user guides at all-guides.com Edit SHOW Plotting Data NNNNNNNNNNNNNNNNNNNNNNNNNN TLK ONLY HPIB System ADDRESS Edit MODE Next TLK LSTN TLK ONLY HPIB Edit Getting Started 1-13...
Page 45 All manuals and user guides at all-guides.com PLOT Record AUTOSCAL Edit COMMENT Next PLOT Edit Exec 1-14 Getting Started...
Page 46: Measure Mode
All manuals and user guides at all-guides.com Measure Mode MEAS The Chan Key Chan Note Local The Mode Key Mode Note Local Control - Measure Mode 2-1...
Page 47: Default Values
All manuals and user guides at all-guides.com The Param Key Param Param Entry Status Note Default Values Param Parameter List 2-2 Local Control - Measure Mode...
Page 48 All manuals and user guides at all-guides.com nnnn.n CAL dB measured input measured input nnn.nnn nnn.nnn Local Control - Measure Mode 2-3...
Page 49 All manuals and user guides at all-guides.com Average sample sample Sample sample ms s min 2-4 Local Control - Measure Mode...
Page 50 All manuals and user guides at all-guides.com dBm W display measured display measured nnn.nnn nnn.nnn Local Control - Measure Mode 2-5...
Page 51 All manuals and user guides at all-guides.com AT T dB output source output source 2-6 Local Control - Measure Mode...
Page 52 All manuals and user guides at all-guides.com The Disp Ref Key measured measured display display Local Control - Measure Mode 2-7...
Page 53 All manuals and user guides at all-guides.com The dB Key Using with a Two Sensor Instrument A/REF B/REF Param Param Disp display measured display measured st Chan display measured measured nd Chan display measured 2-8 Local Control - Measure Mode...
Page 54 All manuals and user guides at all-guides.com Using with a One Sensor Instrument A/REF B/REF Param Param Disp display measured display measured The dBm/W Key dBm W dBm W dBm W The Zero Key Zero Zero Zero Local Control - Measure Mode 2-9...
Page 55 All manuals and user guides at all-guides.com Note ZERO ERR 2-10 Local Control - Measure Mode...
Page 56 All manuals and user guides at all-guides.com The N Dig Key N Dig N Dig The Range Keys Local Control - Measure Mode 2-11...
Page 57 All manuals and user guides at all-guides.com Auto Down 2-12 Local Control - Measure Mode...
Page 58 All manuals and user guides at all-guides.com The Auto Key Auto AUTO The Up Key Example The Down Key Example Down The Analog Output Down Local Control - Measure Mode 2-13...
Page 59 All manuals and user guides at all-guides.com The Modify Keys Editing Discrete Valued Parameters Example Editing Continuous Valued Parameters Editing Units 2-14 Local Control - Measure Mode...
Page 60 All manuals and user guides at all-guides.com Example Local Control - Measure Mode 2-15...
Page 61 All manuals and user guides at all-guides.com...
Page 62: Menu Mode
All manuals and user guides at all-guides.com Menu Mode MENU The Chan Key Chan Note Local The Mode Key Mode Note Local Control - Menu Mode 3-1...
Page 63 All manuals and user guides at all-guides.com The System Key System The Modify Keys The Loss Key Loss Loss Preparation 3-2 Local Control - Menu Mode...
Page 64 All manuals and user guides at all-guides.com Running the Loss Application Loss CONFIG ? APPL LOSS Exec Local Control - Menu Mode 3-3...
Page 65 All manuals and user guides at all-guides.com Warning Note 3-4 Local Control - Menu Mode...
Page 66 All manuals and user guides at all-guides.com Exec The Record Key Record Exec Local Control - Menu Mode 3-5...
Page 67 All manuals and user guides at all-guides.com Preparation Note 3-6 Local Control - Menu Mode...
Page 68: The Stability Application
All manuals and user guides at all-guides.com Record Record Next Prev Record Next Prev APPL The Stability Application Example STABILTY Local Control - Menu Mode 3-7...
Page 69 All manuals and user guides at all-guides.com T_TOTAL AUTODUMP Edit Edit EDIT Next Prev T TOTAL T_TOTAL T_TOTAL T_TOTAL Edit Next Prev AUTODUMP AUTODUMP Note AUTODUMP 3-8 Local Control - Menu Mode...
Page 70 All manuals and user guides at all-guides.com PLOTTER PRINTER Edit Next Prev Running the Stability Application Exec Pause Pause Next Prev Exec Local Control - Menu Mode 3-9...
Page 71: The Logging Application
All manuals and user guides at all-guides.com The Logging Application LOGGING SAMPLES AUTODUMP START THRESHLD Edit Edit EDIT Next Prev SAMPLES SAMPLES 3-10 Local Control - Menu Mode...
Page 72 All manuals and user guides at all-guides.com Edit Next Prev AUTODUMP AUTODUMP Note AUTODUMP Local Control - Menu Mode 3-11...
Page 73 All manuals and user guides at all-guides.com PLOTTER PRINTER Edit Next Prev START START Exec IMMEDIAT ABOVE Exec BELOW Edit Next Prev THRESHLD START ABOVE BELOW THRESHLD Edit Next Prev 3-12 Local Control - Menu Mode...
Page 74 All manuals and user guides at all-guides.com Running the Logging Application Exec Pause Pause Next Prev Exec The Manual Logging Application Exec MAN LOGG Edit Edit EDIT Exec Edit Running the Manual Logging Application Exec Exec Example Local Control - Menu Mode 3-13...
Page 75 All manuals and user guides at all-guides.com Exec The Plot Application Note PLOT AUTOSCAL Y_MIN Y_MAX COMMENT Edit Edit EDIT Next Prev 3-14 Local Control - Menu Mode...
Page 76 All manuals and user guides at all-guides.com AUTOSCAL AUTOSCAL Edit Next Prev Y MIN AUTOSCAL Y_MIN Edit Next Prev Y MAX AUTOSCAL Y_MAX Edit Next Prev Local Control - Menu Mode 3-15...
Page 77 All manuals and user guides at all-guides.com COMMENT COMMENT Note COMMENT ! ? . , : ; & | @ # $ % * [ ] Edit Next Prev Running the Plot Application Exec NO DATA DATA ? ABORTED Exec Reading the Plot STABILITY LOGGING MAN LOGG...
Page 78 All manuals and user guides at all-guides.com T avg Cal Fact Reference T total Samples Local Control - Menu Mode 3-17...
Page 79 All manuals and user guides at all-guides.com Diff Note 3-18 Local Control - Menu Mode...
Page 80 All manuals and user guides at all-guides.com The Print Application Note PRINT AUTOSCAL Y_MIN Y_MAX COMMENT Local Control - Menu Mode 3-19...
Page 81 All manuals and user guides at all-guides.com Edit Edit EDIT Next Prev AUTOSCAL AUTOSCAL Note AUTOSCAL Edit Next Prev Y MIN AUTOSCAL Y_MIN Note Y_MIN 3-20 Local Control - Menu Mode...
Page 82 All manuals and user guides at all-guides.com Edit Next Prev Y MAX AUTOSCAL Y_MAX Note Y_MAX Edit Next Prev COMMENT COMMENT Note COMMENT ! ? . , : ; & | @ # $ % * [ ] Edit Next Prev Local Control - Menu Mode 3-21...
Page 83 All manuals and user guides at all-guides.com Running the Print Application Exec NO DATA DATA ? ABORTED Exec Reading the Printout 3-22 Local Control - Menu Mode...
Page 84 All manuals and user guides at all-guides.com STABILITY LOGGING MANUAL LOGGING Local Control - Menu Mode 3-23...
Page 85 All manuals and user guides at all-guides.com Ch. A (Absolute) B / REF T avg Cal Fact Reference T total Samples Diff Note 3-24 Local Control - Menu Mode...
Page 86 All manuals and user guides at all-guides.com The MinMax Applications Note Local Control - Menu Mode 3-25...
Page 87 All manuals and user guides at all-guides.com Note 3-26 Local Control - Menu Mode...
Page 88 All manuals and user guides at all-guides.com MODE CONT WINDOW REFRESH SAMPLES Running the MinMax Application Exec Edit Pause Pause Exec Local Control - Menu Mode 3-27...
Page 89 All manuals and user guides at all-guides.com The More Key More More Next More Prev More Next The Show Application SHOW Edit EDIT Prev Next MAXIMUM MAXIMUM MINIMUM MINIMUM 3-28 Local Control - Menu Mode...
Page 90 All manuals and user guides at all-guides.com DIFF DIFF AVERAGE AVERAGE Note The Alignment Application Preparation Local Control - Menu Mode 3-29...
Page 91 All manuals and user guides at all-guides.com ALIGNMNT TYPE DELTA MAXPOWER Edit Edit EDIT Next Prev TYPE TYPE AUTO MANUAL 3-30 Local Control - Menu Mode...
Page 92 All manuals and user guides at all-guides.com Edit Next Prev DELTA DELTA Edit Next Prev MAXPOWER TYPE MANUAL MAXPOWER Edit Next Prev Running the Alignment Application Exec TYPE AUTO TYPE MANUAL MAXPOWER Local Control - Menu Mode 3-31...
Page 93 All manuals and user guides at all-guides.com DELTA DELTA DELTA DELTA DELTA MAXPOWER Example Pause 3-32 Local Control - Menu Mode...
Page 94 All manuals and user guides at all-guides.com Exec Local Control - Menu Mode 3-33...
Page 95 All manuals and user guides at all-guides.com...
Page 96: System Mode
All manuals and user guides at all-guides.com System Mode MENU SYS The Mode Key Mode Note The Modify Keys Local Control - System Mode 4-1...
Page 97 All manuals and user guides at all-guides.com The System Key System Next System Prev System Next Note RECALL RECALL Edit MENU SYS EDIT EXEC 4-2 Local Control - System Mode...
Page 98 All manuals and user guides at all-guides.com The Module Type MISMATCH The Location The Channel Local Control - System Mode 4-3...
Page 99 All manuals and user guides at all-guides.com MISMATCH RECALL '54 3 Example Exec STORE STORE Edit MENU SYS EDIT EXEC 4-4 Local Control - System Mode...
Page 100 All manuals and user guides at all-guides.com The Module Type The Channel The Location STORE '54 3 Example Exec HPIB HPIB ADDRESS MODE LANGUAGE Edit Edit Next Prev MENU SYS EDIT ADDRESS ADDRESS Local Control - System Mode 4-5...
Page 101 All manuals and user guides at all-guides.com MODE MODE MODE TLK LSTN TLK ONLY Exec TLK ONLY Exec LANGUAGE LANGUAGE LANGUAGE TMSL HP 8152 Exec Exec 4-6 Local Control - System Mode...
Page 102 All manuals and user guides at all-guides.com DISPLAY DISPLAY BRIGHT Edit MENU SYS EDIT BRIGHT BRIGHT DATETIME DATETIME MM/DD/YY HH:MM:SS Local Control - System Mode 4-7...
Page 103 All manuals and user guides at all-guides.com Edit Edit Next Prev MENU SYS EDIT MM/DD/YY MM/DD/YY HH:MM:SS HH:MM:SS Example Next 4-8 Local Control - System Mode...
Page 104 All manuals and user guides at all-guides.com Programming the HP 8153A Introduction Tutorial Description of Hewlett-Packard Interface IEEE Standard 488.1-1987, IEEE Standard Digital Interface for Programmable Instrumentation IEEE Standard 488.2-1987, IEEE Standard Codes, Formats, Protocols and Common Commands For Use with ANSI/IEEE Std 488.1-1987...
Page 105 All manuals and user guides at all-guides.com The HP 8153A HP-IB Capabilities Mnemonic Function Complete source handshake capability Complete acceptor handshake capability Basic talker; serial poll; unaddressed to talk if addressed to listen; no talk only Basic listener; unaddressed to listen if addressed to talk; no listen only...
Page 106 All manuals and user guides at all-guides.com NNNNNNNNNNN NNNNNNNNNNNNNN ONLY The Parser Parser Type Synchronization *OPC *OPC? *WAI Remote Operation 5-3...
Page 107 All manuals and user guides at all-guides.com Note Clearing the Input Queue Accepted Characters HP-IB Bus Commands 5-4 Remote Operation...
Page 108 All manuals and user guides at all-guides.com Remote Operation 5-5...
Page 109 All manuals and user guides at all-guides.com HP-IB Priority Local Menu ZEROING TMSL Beginners Guide to SCPI Standard Commands for Programmable Instruments 5-6 Remote Operation...
Page 110 All manuals and user guides at all-guides.com SOURce Example SOURce SOURce SOURce 1 :INTernal :FREQuency < > < > :FREQuency? :POWer :ATTenuation 1 < > < > :ATTenuation 1 :STATe < > :STATe? :WAVElength UPPer LOWer BOTH :WAVElength? SOURCE:POWER:STATE Example SOURCE:AM:INTERNAL:FREQUENCY CW Example SOUR:POW:ATT 1.0;...
Page 111 All manuals and user guides at all-guides.com SOURCE:POWER:ATTENUATION 1.0 SOURCE:POWER:STATE ON SOURCE:POWER:WAVELENGTH LOWER Example SOURCE:POWER:STATE ON source:power:state on sour:pow:stat on Setting the HP-IB Address 5-8 Remote Operation...
Page 112: Syntax Diagram Conventions
All manuals and user guides at all-guides.com Syntax Diagram Conventions < > DB DBM W MW NM Remote Operation 5-9...
Page 113 All manuals and user guides at all-guides.com < > number number number 5-10 Remote Operation...
Page 114 All manuals and user guides at all-guides.com number number number Remote Operation 5-11...
Page 115 All manuals and user guides at all-guides.com...
Page 116: Common Commands
All manuals and user guides at all-guides.com Common Commands Common Status Information IEEE Standard 488.2-1987 Remote Operation - Common Commands 6-1...
Page 117 All manuals and user guides at all-guides.com Note 6-2 Remote Operation - Common Commands...
Page 118: Output Queue
All manuals and user guides at all-guides.com SRQ, The Service Request Input Queue Output Queue Error Queue < > Remote Operation - Common Commands 6-3...
Page 119 All manuals and user guides at all-guides.com *CLS *ESE *ESE? *ESR? *IDN? *OPC *OPC? *RST *SRE *SRE? *STB? *TRG *TST? *WAI *CLS *CLS *CLS *CLS *OPC *OPC? 6-4 Remote Operation - Common Commands...
Page 120 All manuals and user guides at all-guides.com OUTPUT 722;"*CLS" *ESE *ESE < > < > *ESE *RST *CLS *ESE? OUTPUT 722;"*ESE 21" Remote Operation - Common Commands 6-5...
Page 121 All manuals and user guides at all-guides.com *ESE? *ESE? < > *ESE? *ESE OUTPUT 722;"*ESE?" ENTER 722; A$ *ESR? *ESR? < > 6-6 Remote Operation - Common Commands...
Page 122 All manuals and user guides at all-guides.com *ESR? OUTPUT 722;"*ESR?" ENTER 722; A$ *IDN? *IDN? HEWLETT-PACKARD, 8153A, 0, 1.0 Remote Operation - Common Commands 6-7...
Page 123 All manuals and user guides at all-guides.com HEWLETT-PACKARD 8153A *IDN? *OPT? DIM A$ [30] OUTPUT 722;"*IDN?" ENTER 722; A$ *OPC *OPC *OPC *OPC *CLS *RST *OPC? *WAI OUTPUT 722;"*CLS;*ESE 1;*SRE 32" OUTPUT 722;"*OPC" 6-8 Remote Operation - Common Commands...
Page 124 All manuals and user guides at all-guides.com *OPC? *OPC? < > *OPC? *OPC? *CLS *RST *OPC *WAI OUTPUT 722;"*OPC?" ENTER 722;A$ ENTER ENTER *OPT? *OPT? < > , < > Remote Operation - Common Commands 6-9...
Page 125 All manuals and user guides at all-guides.com EMPTY *OPT? *IDN? DIM A$ [20] OUTPUT 722;"*OPT?" ENTER 722; A$ HP81554SM,HP 81530A *RST *RST *RST *OPC *OPC? *RST 6-10 Remote Operation - Common Commands...
Page 126 All manuals and user guides at all-guides.com DISPlay:BRIGhtness DISPlay:STATe SENSe:POWer:ATIME SENSe:POWer:RANGe:AUTO SENSe:POWer:WAVElength SENSe:POWer:REFerence SENSe:POWer:REFerence SENSe:POWer:REFerence SENSe:POWer:REFerence:STATe SENSe:POWer:REFerence:STATe:RATIo SENSe:POWer:UNIT SENSe:CORRection ABORt ABORt2 INITiate:CONTinuous INITiate2:CONTinuous SOURce:AM:INTernal:FREQuency SOURce:POWer:ATTenuation SOURce:POWer:ATTenuation2 SOURce:POWer:STATe SOURce:POWer:WAVElength OUTPUT 722;"*RST" *SRE *SRE < > < > *SRE *RST *CLS Remote Operation - Common Commands 6-11...
Page 127 All manuals and user guides at all-guides.com *SRE? *STB? OUTPUT 722;"*SRE 48" *SRE? *SRE? *SRE? *SRE *STB? OUTPUT 722;"*SRE?" ENTER 722; A$ 6-12 Remote Operation - Common Commands...
Page 128 All manuals and user guides at all-guides.com *STB? *STB? < > *STB? STATus *STB? *SRE *SRE? OUTPUT 722;"*STB?" ENTER 722; A$ Remote Operation - Common Commands 6-13...
Page 129 All manuals and user guides at all-guides.com *TRG *TRG *TRG GET INIT INIT:CONT INIT:CONT? OUTPUT 722;"*TRG" *TST? *TST? < > *TST? OUTPUT 722;"*TST?" ENTER 722; A$ *WAI *WAI *WAI 6-14 Remote Operation - Common Commands...
Page 130 All manuals and user guides at all-guides.com *OPC *OPC? OUTPUT 722;"*WAI" Remote Operation - Common Commands 6-15...
Page 131 All manuals and user guides at all-guides.com...
Page 132 All manuals and user guides at all-guides.com HP-IB Status Commands The Status Registers Note Remote Operation - Status Commands 7-1...
Page 133 All manuals and user guides at all-guides.com The Condition Registers The Transition Filters The Event Registers The Enable Registers 7-2 Remote Operation - Status Commands...
Page 134 All manuals and user guides at all-guides.com The Status Commands Note < > Note STATUS:OPERATION:SETTLING:EVENT? STAT:OPER:SETT:EVEN? STAT:OPER:SETT:EVEN? stat:oper:sett:even? STATus:PRESet STATus:PRESet Note Remote Operation - Status Commands 7-3...
Page 135 All manuals and user guides at all-guides.com < > OUTPUT 722;"STAT:PRES" < > STATus: node :CONDition? STATus: < > :CONDition? < > 7-4 Remote Operation - Status Commands...
Page 136 All manuals and user guides at all-guides.com OUTPUT 722;"STAT:OPER:TRIG:POW:COND?" ENTER 722;A$ < > STATus: node :ENABle STATus: < > :ENABle < > STAT: < > :ENAB? OUTPUT 722;"STAT:OPER:TRIG:POW:ENAB 3" < > STATus: node :ENABle? STATus: < > :ENABle? < > STAT: <...
Page 137 All manuals and user guides at all-guides.com OUTPUT 722;"STAT:OPER:SETT:EVEN?" ENTER 722;A$ < > STATus: node :NTRansition STATus: < > :NTRansition < > STAT: < > :NTR? OUTPUT 722;"STAT:QUES:POW:OVERR:NTR 3" < > STATus: node :NTRansition? STATus: < > :NTRansition? < > STAT: <...
Page 138 All manuals and user guides at all-guides.com STAT: < > :PTR? OUTPUT 722;"STAT:QUES:POW:PTR 3" < > STATus: node :PTRansition? STATus: < > :PTRansition? < > STAT: < > :PTR OUTPUT 722;"STAT:QUES:POW:OVERR:PTR?" ENTER 722;A$ The Operation Status Remote Operation - Status Commands 7-7...
Page 139 All manuals and user guides at all-guides.com 7-8 Remote Operation - Status Commands...
Page 140 All manuals and user guides at all-guides.com The Operation Status Commands STATus :CONDition? :ENABle < > :ENABle? :EVENt ? :NTRansition < > :NTRansition? :PTRansition < > STATus :OPERation :SETTling :LPELTier :HPELTier :MEASuring :POWer :TRIGger :POWer :CORRecting :ZERO :AVERaging :POWer :PROGram : <...
Page 141 All manuals and user guides at all-guides.com The OPERation node Note 7-10 Remote Operation - Status Commands...
Page 142 All manuals and user guides at all-guides.com The OPERation:SETTling Node The OPERation:SETTling:LPELTier Node The OPERation:SETTling:HPELTier Node The OPERation:MEASuring Node The OPERation:MEASuring:POW er Node Remote Operation - Status Commands 7-11...
Page 143 All manuals and user guides at all-guides.com The OPERation:TRIGger Node The OPERation:TRIGger:POW er Node The OPERation:CORRecting Node The OPERation:CORRecting:ZERO Node The OPERation:AVERaging Node The OPERation:A VERaging:POW er Node 7-12 Remote Operation - Status Commands...
Page 144 All manuals and user guides at all-guides.com The OPERation:PROGram Node < > < > The OPERation:PROGram: application Node The Questionable Status Remote Operation - Status Commands 7-13...
Page 145 All manuals and user guides at all-guides.com 7-14 Remote Operation - Status Commands...
Page 146 All manuals and user guides at all-guides.com The Questionable Status Commands STATus :CONDition? :ENABle :ENABle? < > :EVENt ? :NTRansition < > :NTRansition? < > :PTRansition STATus :QUEStionable :POWer :OVERRange :LCURRent :HCURRent :LMONitor :HMONitor :ENVTemp :ISUMmary :INSTrument 1 :POWer Remote Operation - Status Commands 7-15...
Page 147 All manuals and user guides at all-guides.com The QUEStionable node Note 7-16 Remote Operation - Status Commands...
Page 148 All manuals and user guides at all-guides.com The QUEStionable:POWer Node The QUEStionable:POW er:OVERRange Node The QUEStionable:POW er:LCURRent Node Remote Operation - Status Commands 7-17...
Page 149 All manuals and user guides at all-guides.com The QUEStionable:POW er:HCURRent Node The QUEStionable:POW er:LMONitor Node The QUEStionable:POW er:HMONitor Node The QUEStionable:POW er:ENVT emp Node 7-18 Remote Operation - Status Commands...
Page 150 All manuals and user guides at all-guides.com The QUEStionable:ISUMmary Node The QUEStionable:ISUMmary:INSTrument[1 2] Node Remote Operation - Status Commands 7-19...
Page 151 All manuals and user guides at all-guides.com The Source Status The Source Status Commands The following are the source status 7-20 Remote Operation - Status Commands...
Page 152 All manuals and user guides at all-guides.com STATus > STATus > :SOURce > :CONDition? > :ENABle > :ENABle? < > > :EVENt ? > :NTRansition < > > :NTRansition? > :PTRansition < > The SOURce node Note Remote Operation - Status Commands 7-21...
Page 153 All manuals and user guides at all-guides.com...
Page 154: Abort Commands
All manuals and user guides at all-guides.com HP-IB Commands ABORt Commands ABORt 1 Specifying the Channel ABORt1 ABORt2 ABORt ABORt 1 INIT:IMM INIT:CONT INIT:CONT? OUTPUT 722;"ABOR" Remote Operation - Commands 8-1...
Page 155: Display Commands
All manuals and user guides at all-guides.com DISPlay Commands DISPlay DISPlay :BRIGhtness < > :BRIGhtness? :STATe < > :STATe ? DISPlay:BRIGhtness DISPlay:BRIGhtness < >< > *RST DISP:BRIG? DISP:STAT DISP:STAT? OUTPUT 722;"DISP:BRIG 0.5" DISPlay:BRIGhtness? DISPlay:BRIGhtness? < > 8-2 Remote Operation - Commands...
Page 156 All manuals and user guides at all-guides.com DISP:BRIG DISP:STAT DISP:STAT? OUTPUT 722;"DISP:BRIG?" ENTER 722;A$ DISPlay:STATe DISPlay :STATe < >< > DISP:STAT ON DISP:STAT OFF *RST DISP:BRIG DISP:BRIG? DISP:STAT? OUTPUT 722;"DISP:STAT ON" DISPlay:STATe? DISPlay :STATe ? < > DISP:BRIG DISP:BRIG? DISP:STAT OUTPUT 722;"DISP:STAT?"...
Page 157: Fetch Commands
All manuals and user guides at all-guides.com FETCh Commands FETCh 1 :SCALar :POWER :DC ? Specifying the Channel FETCh FETCh1 FETCh2 FETCh[:SCALar]:POWer[:DC] FETCh 1 2 :SCALar :DC ? < > 8-4 Remote Operation - Commands...
Page 158 All manuals and user guides at all-guides.com Average sample sample Sample sample Average Average > Average Remote Operation - Commands 8-5...
Page 159 All manuals and user guides at all-guides.com Average sample sample Sample sample > Average READ:SCAL:POW:DC? SENS:POW:REF:STAT SENS:POW:REF:STAT? SENS:POW:UNIT SENS:POW:UNIT? INIT:IMM INIT:CONT INIT:CONT? OUTPUT 722;"FETC:POW?" ENTER 722;A$ 8-6 Remote Operation - Commands...
Page 160: Initiate Commands
All manuals and user guides at all-guides.com INITiate Commands INITiate 1 :CONTinuous < > :CONTinuous? :IMMediate Specifying the Channel INITiate1 INITiate2 INITiate:CONTinuous INITiate 1 < >< > ABOR INIT:IMM INIT:CONT? OUTPUT 722;"INIT1:CONT OFF" INITiate:CONTinuous? INITiate 1 < > ABOR INIT:IMM INIT:CONT Remote Operation - Commands 8-7...
Page 161: Read Commands
All manuals and user guides at all-guides.com OUTPUT 722;"INIT:CONT?" ENTER 722;A$ INITiate[:IMMediate] INITiate 1 ABOR INIT:CONT INIT:CONT OUTPUT 722;"INIT2" READ Commands READ 1 :SCALar :POWER :DC ? Specifying the Channel READ READ1 READ2 READ[:SCALar]:POWer[:DC] READ 1 2 :SCALar :DC ? <...
Page 162: Sense Commands
All manuals and user guides at all-guides.com FETC:SCAL:POW:DC? INIT INIT:CONT INIT:CONT? SENS:POW:REF:STAT SENS:POW:REF:STAT? SENS:POW:UNIT SENS:POW:UNIT? OUTPUT 722;"READ:POW?" ENTER 722;A$ SENSe Commands Remote Operation - Commands 8-9...
Page 163 All manuals and user guides at all-guides.com SENSe SENSe 1 :CORRection :COLLect :ZERO :ZERO? :LOSS :INPut :MAGNitude < > :MAGNitude :POWer :ATIME < > < > :ATIME? :RANGe :AUTO < > :AUTO? :UPPER < > < > :UPPER ? :REFerence TOREF 2, <...
Page 164 All manuals and user guides at all-guides.com Specifying the Channel SENSe SENSe1 SENSe2 SENSe:CORRection:COLLect:ZERO SENSe 1 SENS:CORR:COLL:ZERO? OUTPUT 722;"SENS2:CORR:COLL:ZERO" SENSe:CORRection:COLLect:ZERO? SENSe 1 < > SENS:CORR:COLL:ZERO OUTPUT 722;"SENS2:CORR:COLL:ZERO?" ENTER 722;A$ SENSe:CORRection[:LOSS[:INPut[:MAGNitude]]] SENSe 1 :LOSS :INPut :MAGNitude < >< > < > Remote Operation - Commands 8-11...
Page 165 All manuals and user guides at all-guides.com SENS:CORR:LOSS:INP:MAGN? OUTPUT 722;"SENS2:CORR:LOSS:INP:MAGN 10DB" SENSe:CORRection[:LOSS[:INPut[:MAGNitude]]]? SENSe 1 :LOSS :INPut :MAGNitude ? < > SENS:CORR:LOSS:INP:MAGN OUTPUT 722;"SENS2:CORR:LOSS:INP:MAGN?" ENTER 722;A$ SENSe:POWer:ATIME SENSe 1 < >< > < > SENS:POW:ATIME? OUTPUT 722;"SENS:POW:ATIME 200MS" 8-12 Remote Operation - Commands...
Page 166 All manuals and user guides at all-guides.com SENSe:POWer:ATIME? SENSe 1 < > SENS:POW:ATIME OUTPUT 722;"SENS2:POW:ATIME?" ENTER 722;A$ SENSe:POWer:RANGe:AUTO SENSe 1 < >< > POW:RANG SENS:POW:RANG:UPPER SENS:POW:RANG:UPPER? SENS:POW:RANG:AUTO? OUTPUT 722;"SENS1:POW:RANG:AUTO OFF" SENSe:POWer:RANGe:AUTO? SENSe 1 < > Remote Operation - Commands 8-13...
Page 167 All manuals and user guides at all-guides.com SENS:POW:RANG:UPPER SENS:POW:RANG:UPPER? SENS:POW:RANG:AUTO OUTPUT 722;"SENS2:POW:RANG:AUTO?" ENTER 722;A$ SENSe:POWer:RANGe[:UPPER] SENSe 1 < >< > < > < < 8-14 Remote Operation - Commands...
Page 168 All manuals and user guides at all-guides.com SENS:POW:RANG:UPPER? SENS:POW:RANG:AUTO SENS:POW:RANG:AUTO? OUTPUT 722;"SENS1:POW:RANG:UPPER -20DBM" Remote Operation - Commands 8-15...
Page 169 All manuals and user guides at all-guides.com SENSe:POWer:RANGe[:UPPER]? SENSe 1 < > SENS:POW:RANG:UPPER SENS:POW:RANG:AUTO SENS:POW:RANG:AUTO? OUTPUT 722;"SENS1:POW:RANG:UPPER?" ENTER 722;A$ SENSe:POWer:REFerence SENSe 1 < > TOA 2, < > < > TOREF TOREF Watt Result dB Measured dBm Reference dBm TOREF 8-16 Remote Operation - Commands...
Page 170 All manuals and user guides at all-guides.com F irstChannelMeasured Result dB Reference dB SecondChannelMeasured SENS:POW:REF? SENS:POW:REF:STATE SENS:POW:REF:STATE? SENS:POW:REF:STATE:RATI SENS:POW:REF:STAT:RATI? SENS:POW:REF:DISP OUTPUT 722;"SENS:POW:REF TOREF,10DBM" SENSe:POWer:REFerence? SENSe 1 < > TOA TOREF < > TOREF Remote Operation - Commands 8-17...
Page 171 All manuals and user guides at all-guides.com TOREF TOREF SENS:POW:REF SENS:POW:REF:STATE SENS:POW:REF:STATE? SENS:POW:REF:STATE:RATI SENS:POW:REF:STAT:RATI? SENS:POW:REF:DISP SENS:POW:UNIT SENS:POW:UNIT? OUTPUT 722;"SENS1:POW:REF? TOA" ENTER 722;A$ SENSe:POWer:REFerence:DISPlay SENSe 1 Result dB Measured dBm Reference dBm TOREF SENSe:POWer:REFerence F irstChannelMeasured Result dB Reference dB SecondChannelMeasured SENSe:POWer:REFerence 8-18 Remote Operation - Commands...
Page 172 All manuals and user guides at all-guides.com SENS:POW:REF SENS:POW:REF? SENS:POW:REF:STATE SENS:POW:REF:STATE? SENS:POW:REF:STAT:RATI SENS:POW:REF:STAT:RATI? OUTPUT 722;"SENS:POW:REF TOREF" OUTPUT 722;"SENS:POW:REF:DISP" SENSe:POWer:REFerence:STATe < >< > SENSe 1 SENS:POW:REF SENS:POW:REF? SENS:POW:REF:STATE? SENS:POW:REF:STATE:RATI SENS:POW:REF:STAT:RATI? SENS:POW:REF:DISP SENS:POW:UNIT SENS:POW:UNIT? OUTPUT 722;"SENS1:POW:REF:STATE ON" SENSe:POWer:REFerence:STATe? SENSe 1 < > SENS:POW:REF SENS:POW:REF? SENS:POW:REF:STATE SENS:POW:REF:STATE:RATI SENS:POW:REF:STAT:RATI? SENS:POW:REF:DISP SENS:POW:UNIT SENS:POW:UNIT?
Page 173 All manuals and user guides at all-guides.com SENSe:POWer:REFerence:STATe:RATIo SENSe 1 < > TOA TOREF TOREF 2 TOB SENS:POW:REF SENS:POW:REF? SENS:POW:REF:STATE SENS:POW:REF:STATE? SENS:POW:REF:STAT:RATI? SENS:POW:REF:DISP OUTPUT 722;"SENS2:POW:REF:STAT:RATI TOB" SENSe:POWer:REFerence:STATe:RATIo? SENSe 1 SENS:POW:REF SENS:POW:REF? SENS:POW:REF:STATE SENS:POW:REF:STATE? SENS:POW:REF:STAT:RATI SENS:POW:REF:DISP OUTPUT 722;"SENS1:POW:REF:STAT:RATI?" ENTER 722;A$ 8-20 Remote Operation - Commands...
Page 174 All manuals and user guides at all-guides.com SENSe:POWer:UNIT < >< > SENSe 1 Watt Watt SENS:POW:UNIT? SENS:POW:REF:STATE SENS:POW:REF:STATE? OUTPUT 722;"SENS1:POW:UNIT W" SENSe:POWer:UNIT? SENSe 1 < > SENS:POW:UNIT SENS:POW:REF:STATE SENS:POW:REF:STATE? OUTPUT 722;"SENS2:POW:UNIT?" ENTER 722;A$ SENSe:POWer:WAVElength < >< > < > SENSe 1 Remote Operation - Commands 8-21...
Page 175: Source Commands
All manuals and user guides at all-guides.com SENS:POW:WAVE? OUTPUT 722;"SENS2:POW:WAVE 1300NM" SENSe:POWer:WAVElength? SENSe 1 < > SENS:POW:WAVE OUTPUT 722;"SENS2:POW:WAVE?" ENTER 722;A$ SOURce Commands SOURce SOURce 1 :INTernal :FREQuency < > < > :FREQuency? :POWer :ATTenuation 1 < > < > :ATTenuation 1 :STATe <...
Page 176 All manuals and user guides at all-guides.com Specifying the Channel SOURce SOURce1 SOURce2 SOURce:AM[:INTernal]:FREQuency SOURce 1 < >< > < > SOUR:AM[:INTernal]:FREQ? OUTPUT 722;"SOUR:AM[:INTernal]:FREQ 10KHZ" SOURce:AM[:INTernal]:FREQuency? SOURce 1 < > SOUR:AM[:INTernal]:FREQ OUTPUT 722;"SOURc2:AM[:INTernal]:FREQ?" ENTER 722;A$ Remote Operation - Commands 8-23...
Page 177 All manuals and user guides at all-guides.com SOURce:POWer:ATTenuation SOURce 1 < >< > < > SOUR:POW:ATT2 SOUR:POW:ATT? OUTPUT 722;"SOUR:POW:ATT 1.0DB" SOURce:POWer:ATTenuation? SOURce 1 < > SOUR:POW:ATT OUTPUT 722;"SOURc2:POW:ATT1?" ENTER 722;A$ SOURce:POWer:STATe SOURce 1 < >< > SOUR:POW:STAT? 8-24 Remote Operation - Commands...
Page 178 All manuals and user guides at all-guides.com OUTPUT 722;"SOUR:POW:STAT OFF" SOURce:POWer:STATe? SOURce 1 < > SOUR:POW:STAT OUTPUT 722;"SOURc2:POW:STAT?" ENTER 722;A$ SOURce:POWer:WAVElength Note SOURce 1 < > UPPer LOWer BOTH UPPer LOWer BOTH SOUR:POW:WAVE? OUTPUT 722;"SOUR:POW:WAVE UPP" Remote Operation - Commands 8-25...
Page 179: System Commands
All manuals and user guides at all-guides.com SOURce:POWer:WAVElength? SOURce 1 < > SOUR:POW:WAVE OUTPUT 722;"SOUR2:POW:WAVE?" ENTER 722;A$ SYSTem Commands SYSTem SYSTem :DATE < > , < > , < > :DATE? :ERRor? :TIME < > , < > , < >...
Page 180 All manuals and user guides at all-guides.com SYSTem:DATE SYSTem:DATE < >< > , < > , < > *RST SYST:DATE? SYST:TIME SYST:TIME? OUTPUT 722;"SYST:DATE 1990,1,17" SYSTem:DATE? SYSTem:DATE? < > < > < > SYST:DATE SYST:TIME SYST:TIME? OUTPUT 722;"SYST:DATE?" ENTER 722;A$ SYSTem:ERRor? SYSTem:ERRor? <...
Page 181 All manuals and user guides at all-guides.com OUTPUT 722;"SYST:ERR?" ENTER 722; A$ SYSTem:TIME SYSTem:TIME < >< > , < > , < > SYST:TIME 23,59,60 *RST SYST:DATE SYST:DATE SYST:TIME? OUTPUT 722;"SYST:TIME 9,15,0" 8-28 Remote Operation - Commands...
Page 182 All manuals and user guides at all-guides.com SYSTem:TIME? SYSTem:TIME? < > < > < > SYST:DATE SYST:DATE? SYST:TIME OUTPUT 722;"SYST:TIME?" ENTER 722;A$ Remote Operation - Commands 8-29...
Page 183 All manuals and user guides at all-guides.com...
Page 184: Program Commands
All manuals and user guides at all-guides.com HP-IB Application Commands Program Commands Remote Operation - Application Commands 9-1...
Page 185 All manuals and user guides at all-guides.com PROGram PROGram 1 :[:SELected] :EXECute :NAME < > :NAME? :NUMBer < > < > < > :NUMBer? :STATe CONTinue PAUSe STOP :STATe? PROGram PROGram1 PROGram2 PROGram[:SELected]:EXECute PROGram 1 PROG:SEL:NAME OUTPUT 722;"PROG:SEL:EXEC" PROGram[:SELected]:NAME PROGram 1 <...
Page 186 All manuals and user guides at all-guides.com PROGram[:SELected]:NAME? PROGram 1 < > NO APPL PROG:SEL:NAME OUTPUT 722;"PROG:SEL:NAME?" ENTER 722;A$ PROGram[:SELected]:NUMBer PROGram 1 < >< > , < > PROG:SEL:NUMBer? PROG:SEL:NAME OUTPUT 722;"PROG:SEL:NUMBer SAMPLES,100" PROGram[:SELected]:NUMBer? PROGram 1 < >< > < >...
Page 187 All manuals and user guides at all-guides.com OUTPUT 722;"PROG:SEL:NUMB? ASAMPLES" ENTER 722;A$ PROGram[:SELected]:STATe PROGram 1 CONTinue PAUSe STOP PROG:SEL:EXEC PAUSe STOP CONTinue PAUSe PROG:SEL:STATe? PROG:SEL:NAME OUTPUT 722;"PROG:SEL:STATe RUN" PROGram[:SELected]:STATe? PROGram 1 PROG:SEL:STAT PROG:SEL:NAME OUTPUT 722;"PROG:SEL:STAT?" ENTER 722;A$ 9-4 Remote Operation - Application Commands...
Page 188: The Logging Application
All manuals and user guides at all-guides.com Mainframe Applications The Logging Application LOGGING Note SAMPLES LOGGSTART Remote Operation - Application Commands 9-5...
Page 189: The Stability Application
All manuals and user guides at all-guides.com THRESHOLD LOGGSTART Note SENSe ASAMPLES RESULT The Stability Application STABILITY Note T_TOTAL T_TOTAL SENSe 9-6 Remote Operation - Application Commands...
Page 190 All manuals and user guides at all-guides.com ASAMPLES RESULT Remote Operation - Application Commands 9-7...
Page 191 All manuals and user guides at all-guides.com...
Page 192 All manuals and user guides at all-guides.com HP-IB Programming Examples Remote Operation - Programming Examples 10-1...
Page 193 All manuals and user guides at all-guides.com Example 1 Function Listing Description Exit 10-2 Remote Operation - Programming Examples...
Page 194 All manuals and user guides at all-guides.com Example 2 Function Listing Description sens1:pow Remote Operation - Programming Examples 10-3...
Page 195 All manuals and user guides at all-guides.com read1:pow 10-4 Remote Operation - Programming Examples...
Page 196 All manuals and user guides at all-guides.com Example 3 Function Listing Remote Operation - Programming Examples 10-5...
Page 197 All manuals and user guides at all-guides.com Description fetch1:pow 10-6 Remote Operation - Programming Examples...
Page 198 All manuals and user guides at all-guides.com Example 4 Function NNNNNNNNNNN Local Listing Remote Operation - Programming Examples 10-7...
Page 199 All manuals and user guides at all-guides.com Description 10-8 Remote Operation - Programming Examples...
Page 200 All manuals and user guides at all-guides.com Remote Operation - Programming Examples 10-9...
Page 201 All manuals and user guides at all-guides.com Example 5 Function Listing 10-10 Remote Operation - Programming Examples...
Page 202 All manuals and user guides at all-guides.com Remote Operation - Programming Examples 10-11...
Page 203 All manuals and user guides at all-guides.com Description 10-12 Remote Operation - Programming Examples...
Page 204 All manuals and user guides at all-guides.com Example 6 Function Listing Remote Operation - Programming Examples 10-13...
Page 205 All manuals and user guides at all-guides.com Description 10-14 Remote Operation - Programming Examples...
Page 206 All manuals and user guides at all-guides.com Example 7 Function Listing Remote Operation - Programming Examples 10-15...
Page 207 All manuals and user guides at all-guides.com Description Exit 10-16 Remote Operation - Programming Examples...
Page 208: Installation
All manuals and user guides at all-guides.com Installation Safety Considerations Installation A-1...
Page 209: Initial Inspection
All manuals and user guides at all-guides.com Initial Inspection Warning Line Power Requirements Line Power Cable A-2 Installation...
Page 210 All manuals and user guides at all-guides.com Warning Installation A-3...
Page 211: Operating Environment
All manuals and user guides at all-guides.com Operating Environment Warning A-4 Installation...
Page 212 All manuals and user guides at all-guides.com Temperature Humidity Instrument Cooling Input/Output Signals Caution HP-IB Interface Installation A-5...
Page 213 All manuals and user guides at all-guides.com Cables and Adapters Connector Caution A-6 Installation...
Page 214 All manuals and user guides at all-guides.com Caution HP-IB Logic Levels Note Removing and Fitting Modules How to Remove a Module Caution Installation A-7...
Page 215 All manuals and user guides at all-guides.com How to Fit a Module Caution A-8 Installation...
Page 216: Storage And Shipment
All manuals and user guides at all-guides.com Storage and Shipment Installation A-9...
Page 217: Claims And Repackaging
All manuals and user guides at all-guides.com Claims and Repackaging Return Shipments to HP A-10 Installation...
Page 218 All manuals and user guides at all-guides.com Accessories Mainframe Accessories B-1...
Page 219 All manuals and user guides at all-guides.com Modules B-2 Accessories...
Page 220: Connector Interfaces And Other Accessories
All manuals and user guides at all-guides.com Connector Interfaces and Other Accessories Caution Accessories B-3...
Page 221 All manuals and user guides at all-guides.com B-4 Accessories...
Page 222: Speci Cations
All manuals and user guides at all-guides.com Specications Mainframe Specications Specications C-1...
Page 223 HP-IB interface Function code SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, CO, E2 SCPI command set HP-IB capability modes and parameters can be programmed Transfer time 20ms for one measurement result < 800ms for 100 measurement results out of memory...
Page 224: Declaration Of Conformity
All manuals and user guides at all-guides.com Declaration of Conformity Specications C-3...
Page 225 All manuals and user guides at all-guides.com Supplementary Information: C-4 Specications...
Page 226: Acoustic Noise Emission
All manuals and user guides at all-guides.com Acoustic Noise Emission Specications C-5...
Page 227 All manuals and user guides at all-guides.com...
Page 228: Function Tests
All manuals and user guides at all-guides.com Function Tests Introduction Equipment Required Function Tests D-1...
Page 229: Test Record
All manuals and user guides at all-guides.com Test Record Test Failure Instruments Specications D-2 Function Tests...
Page 230 All manuals and user guides at all-guides.com IA. Function Test Using the HP 81533A Note Display Function and Module Interface Tests Display Function Tests Function Tests D-3...
Page 231 All manuals and user guides at all-guides.com Note Module Interface Tests Note D-4 Function Tests...
Page 232 All manuals and user guides at all-guides.com Function Tests D-5...
Page 233 All manuals and user guides at all-guides.com ANALOG INPUT (8152A IN) P.CTRL IB. Function Test using a HP 81530/31/32 or HP 81536A Note D-6 Function Tests...
Page 234 All manuals and user guides at all-guides.com SELFTEST SELFTEST Zeroing -- -- HP-IB Interface Test (Optional) *IDN? HEWLETT-PACKARD, 8153A, 0, n.n Function Tests D-7...
Page 235 All manuals and user guides at all-guides.com D-8 Function Tests...
Page 236 All manuals and user guides at all-guides.com Function Tests D-9...
Page 237 All manuals and user guides at all-guides.com D-10 Function Tests...
Page 238 All manuals and user guides at all-guides.com Function Tests D-11...
Page 239 All manuals and user guides at all-guides.com...
Page 240: Cleaning Procedures
All manuals and user guides at all-guides.com Cleaning Procedures whenever possible use physically contacting dry connectors Cleaning Materials Cleaning Procedures E-1...
Page 241 All manuals and user guides at all-guides.com Cleaning Fiber/Front-Panel Connectors Cleaning Connector Interfaces Note E-2 Cleaning Procedures...
Page 242 All manuals and user guides at all-guides.com Cleaning Connector Bushings Caution Cleaning Detector Windows Cleaning Lens Adapters Caution Cleaning Procedures E-3...
Page 243 All manuals and user guides at all-guides.com Cleaning Detector Lens Interfaces Note E-4 Cleaning Procedures...
Page 244 All manuals and user guides at all-guides.com Local Control Summary Chan Local Mode Measure Mode MEAS Param Disp dBm/W Zero N Dig Auto Down Local Control Summary F-1...
Page 245 All manuals and user guides at all-guides.com Menu Mode MENU System Loss Record STABILTY T_TOTAL AUTODUMP LOGGING SAMPLES AUTODUMP START THRESHLD THRESHLD MAN LOGG Exec PLOT PRINT AUTOSCAL Y_MIN Y_MAX COMMENT More SHOW MAXIMUM MINIMUM DIFF AVERAGE F-2 Local Control Summary...
Page 246 All manuals and user guides at all-guides.com ALIGNMNT TYPE DELTA MAXPOWER Edit Exec Pause Prev Next System Mode MENU SYS RECALL STORE HPIB ADDRESS MODE Local Control Summary F-3...
Page 247 All manuals and user guides at all-guides.com LANGUAGE DISPLAY BRIGHT DATETIME MM/DD/YY HH:MM:SS F-4 Local Control Summary...
Page 248 All manuals and user guides at all-guides.com HP 8153A HP-IB Command Summary Mnemonic Function Complete source handshake capability Complete acceptor handshake capability Basic talker; serial poll; unaddressed to talk if addressed to listen; no talk only Basic listener; unaddressed to listen if addressed to talk; no listen only...
Page 249 All manuals and user guides at all-guides.com G-2 Remote Operation...
Page 250 All manuals and user guides at all-guides.com *CLS *ESE *ESE? *ESR? *IDN? *OPC *OPC? *RST *SRE *SRE? *STB? *TRG *TST? *WAI ABORt ABORt 1 DISPlay DISPlay :BRIGhtness < > :BRIGhtness? :STATe < > :STATe ? FETCh FETCh 1 :SCALar :POWER :DC ? Remote Operation G-3...
Page 251 All manuals and user guides at all-guides.com INITiate INITiate 1 :IMMediate :CONTinuous < > :CONTinuous? PROGram PROGram 1 :[:SELected] :EXECute :NAME < > :NAME? :NUMBer < > < > :NUMBer? < > :STATe CONTinue PAUSe STOP :STATe? The Logging Application application LOGGING Parameters...
Page 252 All manuals and user guides at all-guides.com THRESHOLD Results ASAMPLES RESULT The Stability Application application STABILITY Parameters T_TOTAL Results ASAMPLES RESULT READ READ 1 :SCALar :POWER :DC ? Remote Operation G-5...
Page 253 All manuals and user guides at all-guides.com SENSe SENSe 1 :POWer < > < > :ATIME :ATIME? :RANGe :UPPER < > < > :UPPER ? < > :AUTO :AUTO? :WAVElength < > < > :WAVElength? :REFerence TOREF 2, < > < >...
Page 254 All manuals and user guides at all-guides.com SOURce SOURce 1 :INTernal < > < > :FREQuency :FREQuency? :POWer < > < > :ATTenuation 1 :ATTenuation 1 :STATe < > :STATe? :WAVElength UPPer LOWer BOTH :WAVElength? Remote Operation G-7...
Page 255 All manuals and user guides at all-guides.com STATus :CONDition? :ENABle :ENABle? < > :EVENt ? :NTRansition < > :NTRansition? :PTRansition < > STATus :OPERation :SETTling :LPELTier :HPELTier :MEASuring :POWer :TRIGger :POWer :CORRecting :ZERO :AVERaging :POWer :PROGram : < > G-8 Remote Operation...
Page 256 All manuals and user guides at all-guides.com STATus :CONDition? :ENABle < > :ENABle? :EVENt ? :NTRansition < > :NTRansition? :PTRansition < > STATus :QUEStionable :POWer :OVERRange :LCURRent :HCURRent :LMONitor :HMONitor :ENVTemp :ISUMmary :INSTrument 1 :POWer STATus:SOURce STATus :SOURce :CONDition? :ENABle :ENABle? <...
Page 257 All manuals and user guides at all-guides.com SYSTem SYSTem :ERRor? :DATE < > , < > , < > :DATE? :TIME < > , < > , < > :TIME? G-10 Remote Operation...
Page 258 All manuals and user guides at all-guides.com HP 8152A HP-IB Command Summary Dierences Note DB(MW) CAL? WCAL? FETCh FETCh WVL? ERR? LERR? Remote Operation H-1...
Page 259 All manuals and user guides at all-guides.com Note Example CH1;Q1;CH2;U1 H-2 Remote Operation...
Page 260 All manuals and user guides at all-guides.com Using the FETCh Command - An Example Old Program (HP 8152A) New Program (HP 8153A) ..1300 SUB Single_meas(P$) 1300 SUB Single_meas(P$) 1310 CLEAR Pmm 1310 CLEAR Pmm 1320 OUTPUT Pmm;"CSB"...
Page 261: Setting The Filter
All manuals and user guides at all-guides.com Setting the Filter *RST H-4 Remote Operation...
Page 262 All manuals and user guides at all-guides.com Listener Function Settings Remote Operation H-5...
Page 263 All manuals and user guides at all-guides.com 1, < > 2, < > 1, < > 2, < > 1, < > 2, < > 1, < > DBM H-6 Remote Operation...
Page 264 All manuals and user guides at all-guides.com 2, < > DBM 3, < > < > Standard Parameter Set Remote Operation H-7...
Page 265 All manuals and user guides at all-guides.com Talker Function Interrogating Settings LRN? ZER? F? 1 RNG? 1 RNG? WVL? 1 WVL? H-8 Remote Operation...
Page 266 All manuals and user guides at all-guides.com REF? 1 REF? Remote Operation H-9...
Page 267: Status/Error Reporting
All manuals and user guides at all-guides.com Status/Error Reporting Parameter/Operation Mnemonic Comment Status Byte Returns 3-digit integer (000-191) Status Byte Mask Returns 3-digit integer (000-191) Condition Byte Returns 2-digit integer (00-63) Self-test Executes self-test, returns 0 for pass and 1 for fail Error Number Returns 3-digit integer representing error code...
Page 268: Error Codes
All manuals and user guides at all-guides.com Error Codes Local Operation Error Codes Module Related Errors LIGHT NO HEAD SETTLING NO HEAD MODULE MODULE MODULE MODULE KEY JAM Error Codes I-1...
Page 269 All manuals and user guides at all-guides.com Specic Error Identiers Store and Recall Errors CH EMPTY MISMATCH NO DATA MEM FAIL Plot, Print, Show, and Manual Logging Errors NO DATA INVALID TLKONLY? Loss Errors CONFIG CONFIG I-2 Error Codes...
Page 270 All manuals and user guides at all-guides.com HP-IB Errors HP-IB Error Codes No Error Instrument Specic Errors Error Codes I-3...
Page 271: Command Errors
All manuals and user guides at all-guides.com Command Errors I-4 Error Codes...
Page 272 All manuals and user guides at all-guides.com > Error Codes I-5...
Page 273: Execution Errors
All manuals and user guides at all-guides.com Execution Errors I-6 Error Codes...
Page 274: Device Dependant Errors
All manuals and user guides at all-guides.com Device Dependant Errors *RCL Error Codes I-7...
Page 275: Query Errors
All manuals and user guides at all-guides.com Query Errors I-8 Error Codes...
Page 276 All manuals and user guides at all-guides.com Sales and Service Oces Sales and Service Oces J-1...
Page 277 All manuals and user guides at all-guides.com J-2 Sales and Service Oces...
Page 278 All manuals and user guides at all-guides.com Backdating Instruments with Serial Numbers 2946G00475 and Earlier Backdating K-1...
Page 279 All manuals and user guides at all-guides.com Instruments with Serial Numbers 2946G00225 and Earlier The Print Application PRINT SAMPLE COMMENT Edit EDIT SAMPLES SAMPLES Edit COMMENT COMMENT Note COMMENT ! ? . , : ; & | @ K-2 Backdating...
Page 280 All manuals and user guides at all-guides.com # $ % * [ ] Edit Next Prev Backdating K-3...
Page 281 All manuals and user guides at all-guides.com Index Index-1...
Page 282 All manuals and user guides at all-guides.com Index-2...
Page 283 All manuals and user guides at all-guides.com Index-3...
Page 284 All manuals and user guides at all-guides.com Index-4...
Page 285 All manuals and user guides at all-guides.com Index-5...
Page 286 All manuals and user guides at all-guides.com Index-6...
Page 287 All manuals and user guides at all-guides.com Index-7...
Page 288 All manuals and user guides at all-guides.com Index-8...

This manual is also suitable for:

Hp 81551mm Hp 81552sm Hp 81553sm Hp 81554sm 2946g00476

HP 8153 A Operating And Programming Manual

Quick Links

Related Manuals for HP HP 8153 A

Summary of Contents for HP HP 8153 A

This manual is also suitable for:

Table of Contents