Mitsubishi Electric FA-A-0326-C Technical Bulletin

Network cameras for camera recorder module

Quick Links

TECHNICAL BULLETIN
FA-A-0326-C
Applicable Network Cameras for Camera Recorder Module
Date of Issue
February 2021 (Ver. C: July 2021)
Relevant Models
RD81RC96-CA
Thank you for your continued support of Mitsubishi Electric programmable controllers, MELSEC iQ-R series.
This bulletin introduces network cameras applicable to a camera recorder module.
For the product availability, please contact the manufacturer.
1
PRECAUTIONS
Specifications of the applicable products are subject to change without notice.
Before using the product, please read "SAFETY PRECAUTIONS" of User's Manual.
For precautions on wiring of each product, refer to the manual for the product.
1.1
Precautions for Network Cameras
Network cameras manufactured by Axis Communications
• The capture mode and power line frequency must be set according to a frame rate to be set in a camera recorder module.
(Page 5 Setting an IP address etc.)
For the specifications of the capture mode, refer to the manual for a network camera.
Network cameras manufactured by CANON INC.
• If a resolution to be set in a camera recorder module or GOT does not appear in the communication test screen in the
module extended parameter, change the setting of the video size set for a network camera. (Page 7 Setting a video
size set)
• If neither PTZ operation nor preset movement is available, release the camera control authority.
For details on the setting method, refer to the manual for a network camera used.
Network cameras manufactured by Panasonic i-PRO Sensing Solutions Co., Ltd.
• If a resolution to be set in a camera recorder module or GOT does not appear in the communication test screen in the
module extended parameter, change the setting of the image capture mode for a network camera. (Page 9 Setting an
image capture mode)
For details on the setting method, refer to the manual for a network camera used.
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14 , YADA-MINAMI 5-CHOME , HIGASHI-KU, NAGOYA , JAPAN
[
1 / 9
]
loading

Summary of Contents for Mitsubishi Electric FA-A-0326-C

  • Page 1 February 2021 (Ver. C: July 2021) Relevant Models RD81RC96-CA Thank you for your continued support of Mitsubishi Electric programmable controllers, MELSEC iQ-R series. This bulletin introduces network cameras applicable to a camera recorder module. For the product availability, please contact the manufacturer.
  • Page 2 NETWORK CAMERA LIST This chapter shows the list of products that satisfy the interface specifications of modules manufactured by Mitsubishi Electric. When applying the product, make sure to examine the applicability and confirm that it will not cause system operation problems.
  • Page 3 TECHNICAL BULLETIN 3 / 9 FA-A-0326-C OPERATION CONFIRMED VERSIONS AND SUPPORTED FUNCTIONS The operations of the listed ONVIF supported network cameras with the following firmware versions have been confirmed by Mitsubishi Electric. However, when applying the product, make sure to examine the applicability and confirm that it will not cause system operation problems.
  • Page 4: Setting Procedure

    TECHNICAL BULLETIN 4 / 9 FA-A-0326-C Network cameras manufactured by Panasonic i-PRO Sensing Solutions Co., Ltd. The following shows the confirmed versions and the availability of each function when connecting each model to a camera recorder module. Each function can be used only when selecting the simple setting mode in a camera recorder module.
  • Page 5: Operating Procedure

    TECHNICAL BULLETIN 5 / 9 FA-A-0326-C Set all IP addresses for a CPU module in a programmable controller system, network camera, and each network storage device to be in the same segment. Initial Settings for an ONVIF Supported Network Camera Network camera manufactured by Axis Communications Use a web browser to set a network camera.
  • Page 6 TECHNICAL BULLETIN 6 / 9 FA-A-0326-C Setting the live view window The following shows the procedure for setting the live view window. Set it with a personal computer and network camera connected after setting an IP address. Operating procedure Enter the IP address of a network camera on a web browser.
  • Page 7 TECHNICAL BULLETIN 7 / 9 FA-A-0326-C Network camera manufactured by CANON INC. Use a web browser to set a network camera. Setting an IP address etc. The following shows the procedure for setting an IP address etc. by connecting to a network camera from a web browser.
  • Page 8 TECHNICAL BULLETIN 8 / 9 FA-A-0326-C Network camera manufactured by Panasonic i-PRO Sensing Solutions Co., Ltd. Use a web browser to set a network camera. Setting an IP address etc. The following shows the procedure for setting an IP address etc. by connecting to a network camera from a web browser.
  • Page 9 TECHNICAL BULLETIN 9 / 9 FA-A-0326-C Setting an image capture mode The following shows the procedure for setting an image capture mode. Set it with a personal computer and network camera connected after setting an IP address. A resolution that can be set in a camera recorder module or GOT is determined according to the setting of "Image capture mode."...