Quick Links
Miranda Densité HMP-1801 High
Definition Media Player
Requirements
• Video Server Control software option
• If you are using multiple video channels on the HMP-1801, each
channel should be assigned to a separate Remote Port, or a Port
Expander should be used.
• Serial Interface Cable (DB9 to RJ-45)
Port Connections
Switcher
REMOTE Port
Communications
(female)
Video
Input BNC
Cable Connectors
1
2
3
4
5
6
7
8
9
To Switcher
(male cable end)
Figure 1 DB9 to RJ-45 Cable
Pinouts
Switcher
2 (Rx-)
3 (Tx+)
7 (Rx+)
8 (Tx-)
Switcher Setup
To Set Up Communications
1. Press HOME
Setup
Type.
• Use the Com Port knob to select the REMOTE X port that
you connected the HMP-1801 to.
• Use the Device knob to select VTR (CLIP).
2. Press Select Device.
Video Server
VDCP Port
(female RJ45)
Output BNC
1 2 3 4 5 6 7 8
To Device
(male cable end)
HMP-1801
2 (Tx-)
3 (Rx+)
1 (Tx+)
6 (Rx-)
Installation
Com Setup
• Use the Device knob to select VDCP.
• Use the VTR Preroll knob to select 0.
3. Press Com Type.
• Use the Type knob to select RS-422.
4. Press Com Settings.
• Use the Baud knob to select 38400.
• Use the Parity knob to select ODD.
5. Press Extra Options.
• Use the Option knob to select TargetMachine.
• Use the Value knob to select HMP-1801. The remaining
options are set automatically.
6. Press HOME
To Set Up Video Inputs
1. Press HOME
Type.
• Use the BNC knob to select the input BNC that the video
output of the HMP-1801 is connected to.
• Use the Type knob to select VTR.
• Use the Video Format knob to select the video format of the
video output of the HMP-1801.
2. Press More
• Use the Controller knob to select the port on the switcher that
you assigned the HMP-1801 to.
3. Press VDCP Setup.
• Use the Channel knob to select 1.
• Use the SubAddress knob to select 0.
4. Press HOME
Device Setup
On the Densité HMP-1801, the following setting should be made:
• Auto Play: NO
• End Behavior: BLACK
• Loop Count: 1 times
Troubleshooting
If the device is communicating properly, but you cannot gain control
from the switcher, try cycling through different values for the
SubAddress, and then the Channel. The most common settings are as
follows:
• Channel set to the video channel number and SubAddress set to 0.
Confirm.
Setup
Installation
BNC
VTR/VDCP Xpts.
Confirm.
BNC
4999DR-151-04
Related Manuals for Miranda Synergy SD Series
Summary of Contents for Miranda Synergy SD Series
- Page 1 Miranda Densité HMP-1801 High • Use the Device knob to select VDCP. • Use the VTR Preroll knob to select 0. Definition Media Player 3. Press Com Type. • Use the Type knob to select RS-422. Requirements 4. Press Com Settings.
- Page 2 • Channel set to the video channel number and SubAddress set to the serial communications port on the video server. Compatibility Video Server Version Densité HMP-1801 Switchers Synergy 1 SD Synergy Series SD Synergy MD/X Vision QMD/X 14.0 Vision MultiPanel Support 15.0 Automation OverDrive...