AEG ABL18F Original Instructions Manual

AEG ABL18F Original Instructions Manual

Hide thumbs Also See for ABL18F:

Quick Links

ABL18F
Original instructions
loading

Summary of Contents for AEG ABL18F

  • Page 1 ABL18F Original instructions...
  • Page 2 Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modifications.
  • Page 3 ABL18F 1. Handle, insulated gripping surface 2. Trigger switch 3. Lower guard 4. Upper guard 5. Cutting wheel 6. Chip deflector 7. Cutting depth adjustment screw 8. Cutting depth lock nut 9. Work clamp 10. Work clamp lock lever 11. Work table 12.
  • Page 4: Cruise Control

    TURBO BOOST BUTTON CRUISE CONTROL UPPER TUBE LOWER TUBE...
  • Page 5 HANDLE TRIGGER BATTERY...
  • Page 6 Correct turbo button use TURBO BOOST Correct cruise control use Attaching the lower tube Correct operating techniques...
  • Page 7 Inserting and removing the battery Correct trigger use START STOP...
  • Page 8 Attaching the lower tube...
  • Page 9 Inserting and removing the battery NOTE: This AEG fusion blower is optimised for use with FORCE battery packs. For the best possible performance, use with AEG 18V FORCE battery packs. click...
  • Page 10 Correct trigger use START STOP...
  • Page 11 Correct cruise control use START STOP...
  • Page 12 Correct turbo button use START TURBO NOTE: The turbo boost button provides the highest performance for the tool, but will also drain the BOOST battery capacity more quickly. Use turbo boost only when required to maximise runtime. STOP...
  • Page 13 Correct operating techniques...
  • Page 14 Maintenance...
  • Page 15 Storage...
  • Page 16 NOTE: Always store the unit in a cool, dry, and well ventilated area.
  • Page 17 ABL18F/ABL18FF6 TECHNICAL DATA CORDLESS BLOWER Rated voltage 18 V DC Rated current turbo mode 39 A Turbo mode Air velocity turbo mode 200 km/h Air volume turbo mode 465 CFM Fan loaded speed turbo mode 19600 rpm Weight 2.3 kg Noise emission level (in accordance with EN 50636-2-100 Annex CC) A-weighted sound pressure level at the operator’s position...
  • Page 18: Operation

    long trousers. Do not operate the product when barefoot or wearing operation. Stop the product if anyone enters the area. open sandals. Avoid wearing clothing with loose fitting or that has Do not operate the product in poor lighting. The operator requires a hanging cords or ties.
  • Page 19: Transporting Lithium Batteries

    ADDITIONAL BATTERY SAFETY WARNINGS RESIDUAL RISKS Even when the product is used as prescribed, it is still impossible WARNING! to completely eliminate certain residual risk factors. The following To reduce the risk of fire, personal injury, and product damage due hazards may arise and the operator should pay special attention to to a short circuit, never immerse your tool, battery pack or charger in avoid the following:...
  • Page 20 Beware of thrown or flying objects. Keep all bystanders, especially children and pets, at least 15m away from the operating area. Rotating fans. Keep hands and feet out of openings while the product is running. Remove the battery pack before starting any work on the product.
  • Page 24 31 Gilby Road, Mount Waverley, VIC, 3149, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand AEG is a registered trademark used under license from AB Electrolux (publ). 960087370-01 © 2019 Techtronic Cordless GP. All rights reserved.