QW-D21I492X-EU
Table of Contents
loading

Summary of Contents for Sharp QW-D21I492X-EU

  • Page 1 QW-D21I492X-EU...
  • Page 3: Table Of Contents

    CONTENTS CHAPTER-1: EXPLANATION OF PRODUCT Technical specifications Conformity with the standards and test data CHAPTER-2: SAFETY INFORMATION AND RECOMMENDATIONS Recycling Safety information Recommendations Items not suitable for dishwashing CHAPTER-3: INSTALLING THE MACHINE Positioning the machine Water connections Water inlet hose Water outlet hose Electrical connection Prior to using the machine...
  • Page 4: Chapter-1: Explanation Of Product

    CHAPTER -1: EXPLANATION OF PRODUCT 1. Upper basket with racks 2. Upper spray arm 3. Lower basket 4. Lower spray arm 5. Filters 6. Rating plate 7. Control Panel 8. Detergent and rinse-aid dispenser 9. Cutlery basket 10. Salt dispenser 11.
  • Page 5: Technical Specifications

    CHAPTER -1: TECHNICAL SPECIFICATIONS Technical specifications Capacity 12 place settings Height 820 mm - 870 mm Width 598 mm Depth 550 mm Net Weight 38 kg Electricity input 220-240 V, 50 Hz Total Power 1900 W Heating Power 1800 W Pump Power 100 W Drain Pump Power...
  • Page 6: Chapter-2: Safety Information And Recommendations

    CHAPTER -2: SAFETY INFORMATION AND RECOMMENDATIONS Recycling • Recyclable materials are used in certain components and packaging. • Plastic parts are marked with international abbreviations: (>PE< , >PS< , >POM<, >PP<, ) • Cardboard parts have been produced from recycled paper which should be disposed of into waste paper containers for recycling.
  • Page 7 • To avoid accidents, do not leave the door open. • Place knives and other sharp-ended objects in the cutlery basket in blade down position. • If the supply cord is damaged, it must be replaced by Sharp, or its service agent. For your children’s safety •...
  • Page 8: Recommendations

    CHAPTER -3: INSTALLING THE MACHINE Recommendations • For energy and water saving, remove coarse residues on your dishes before placing the dishes into the machine. Start your machine after having fully loaded it. • Use the pre-wash programme only when necessary. •...
  • Page 9: Water Connections

    CHAPTER -3: INSTALLING THE MACHINE If the door of the machine does not close properly, check if the machine is stable on the floor. If not, adjust the feet and ensure its stable position. Water connection Indoor plumbing must be suitable for installing a dishwasher. Also, we recommend that you fit a filter at the entrance of your property so as to avoid any damage to your machine because of contamination (sand, clay, rust etc.) that might be occasionally carried in through the mains water supply or the indoor plumbing,...
  • Page 10: Electrical Connection

    CHAPTER -3: INSTALLING THE MACHINE Warning: When a drain hose longer than 4 m is used, the dishes might remain dirty. In that case, Sharp will not accept responsibility. Electrical connection The earthed plug of your machine should be connected to an earthed outlet supplied by suitable voltage and current.
  • Page 11: Chapter-4: Preparing The Machine For Use

    CHAPTER -4: PREPARING THE MACHINE FOR USE Prior to using the machine for the first time • Check whether the electricity and supply water specifications match the values indicated by the installation instructions for the machine. • Remove all packaging materials inside the machine. •...
  • Page 12: Adjusting Salt Consumption

    CHAPTER -4: PREPARING THE MACHINE FOR USE Adjusting salt consumption Water German French British Hardness Level Indicator hardness hardness hardness hardness level level dH level dF level dE P1-P5 leds are on. 6-11 10-20 7-14 P2-P5 leds are on. 12-17 21-30 15-21 P3-P5 leds are on.
  • Page 13: Combined Detergent

    CHAPTER -4: PREPARING THE MACHINE FOR USE Combined detergents Combined detergents may include various properties. Before using the detergent, read the instructions carefully. Generally combined detergents produce sufficent results under certain conditions only. Points to consider when using this type of products: •...
  • Page 14: Chapter-5: Loading Your Dishwasher

    The upper basket is for thin and narrow items. You are recommended to use the cutlery basket in order to obtain the best result. To avoid any possible injuries, place long-handle and sharp-pointed knives with their sharp points facing down or horizontally on the baskets.
  • Page 15 CHAPTER-4: LOADING YOUR DISHWASHER The movable cutlery basket can slide between the front and rear wires of the bottom basket. EN-15...
  • Page 16: Alternative Basket Loads

    CHAPTER-4: LOADING YOUR DISHWASHER Alternative basket loads Lower Basket Top basket Incorrect loads Important Note for Test Laboratories For detailed information on performance tests, please contact following address: “[email protected]” . In your email, please provide the model name and serial number (20 digits) which you can find on the appliance door.
  • Page 17: Chapter -6: Programme Descriptions

    CHAPTER -5: PROGRAMME DESCRIPTIONS PROGRAMME DESCRIPTIONS Programme items Programme No Reference Programme Intensive 70° C Express 65°C Quick 30 min. Prewash names and 40°C No Heat temperatures Type of food soups, sauces, soups, sauces, coffee, milk, coffee, milk, Pre-wash waste pasta, eggs, pasta, eggs, tea, cold...
  • Page 18: Chapter -7: Switching On The Machine And Selecting A Programme

    CHAPTER -6: SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME 1.) Power On/Off Button When the power on/off button is pressed, start /pause is lit. 2.) Programme Selection Button With the programme selection button, you can select a suitable program for your dishes. 3.) Delay Timer Button Thanks to the delay feature of your machine, you can delay the start time of the program for 3-6-9 hours by pressing the Delay button.
  • Page 19: Switching On The Machine

    CHAPTER -6: SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME Switching on the machine When you select a program with the program selection button, the light of the selected program turns on and the end of program indicator turns off. Once the power on/off key is pressed, the end of program indicator turns on.
  • Page 20: Changing A Programme With Resetting

    CHAPTER -6: SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME Changing a programme with resetting If you would like to cancel a program while a washing program is resumed Open the door of your machine. The LED for the last selected program will turn on.
  • Page 21: Chapter-8: Maintenance And Cleaning

    CHAPTER -8: MAINTENANCE AND CLEANING Cleaning the machine regularly prolongs the machines service life. Oil and lime scale may accumulate in the machines washing section. In case of such accumulation; -Fill the detergent compartment without loading any dishes into the machine, run the machine at high temperature.
  • Page 22: Chapter-9: Failure Codes And What To Do İn Case Of Failure

    If the “Wash/Dry” and “End” keep flashing • The water overflow alarm is active • Turn off your tap and contact the Sharp helpdesk. If the control lights won’t go out after a wash operation Check if the Power On/Off button is released.
  • Page 23: Chapter-10: Practical And Useful Information

    CHAPTER -10: PRACTICAL AND USEFUL INFORMATION If there are partial food wastes left on the dishes • Dishes placed incorrectly into the machine, sprayed water did not reach the related places. • Basket overly loaded. • Dishes leaning against one another. •...
  • Page 24 DISPOSAL OF YOUR OLD MACHINE This symbol on the product or package implies that the product should not be treated as domestic waste. Instead, it should be delivered to waste collection places recycling electrical and electronic equipment. You will help avoid damage to the environment and risks to public health. Recycling materials will help natural resources to be preserved.
  • Page 25 52200042 R23 EN-25...

Table of Contents