Table of Contents
loading

Summary of Contents for Beko HIBG64120SB

  • Page 11 Technical specifications Voltage / frequency 220-240 V~; 50 Hz Cable type / section min.H05V2V2-F 3 x 0,75 mm or equivalent Category of gas product Cat II 2H3+ Gas type / pressure NG G 20/20 mbar Total gas consumption 7.9 kW §...
  • Page 12 Installation Product must be installed by a qualified Before installation person in accordance with the The hob is designed for installation into regulations in force. The manufacturer commercially available work tops. A shall not be held responsible for safety distance must be left between the damages arising from procedures appliance and the kitchen walls and carried out by unauthorized persons...
  • Page 13 Minimum height to extractor as X -Minimum distance between the cut- recommend in hood instruction out and the side wall. manual. If not recommended in the Y -Minimum distance between the rear hood instruction manual, this height edge of the cut-out and the rear wall. should be at least 650 mm.

Table of Contents