Quick Links
1 of 5
-
O P ER ATING INSTR UC TI O NS
Hydraulic compression tool
TBM14CR-LI
Table of Contents:
1. General Information .................................................................. 2-3
- DANGER: Safety rules .....................................................................2
- CAUTION: Personal Safety ............................................................2
- WARNING: Tool Use and Care .......................................................2
- CAUTION: Battery and Charger Use and Care .........................2
- Features .............................................................................................2
- Specifications ...................................................................................2
2. Part & Accessories .........................................................................3
- Hydraulic Compression Tool.........................................................3
- Battery (BAT-MK) .............................................................................3
- Charger ..............................................................................................3
- Tool Hand Bag ..................................................................................3
3. Operating instructions .................................................................3
- Charging the battery ......................................................................3
- Attaching & Detaching the battery pack ...................................3
- Compression cycles ........................................................................4
- Switch operations ...........................................................................4
- Compression operation .................................................................4
4. Troubleshooting guide ................................................................ 5
Important
Read and understand all instructions and
safety information in this manual
before operating or servicing this tool.
Be aware of proper usage and potential
hazards.
CAUTION:
• Installations should be performed by a qualified
electrician in accordance with national and local
electrical codes.
WARNING:
• Risk of shock, disconnect power before
installation.
• Never attempt to make a compression on a "HOT"
Line.
• Never assume the power is OFF! Determine
beforehand if any electrical hazards could exist
when making a connection to line or wire.
• Tools are NOT insulated for use on or near
conductors. Use of these tools near energized
conductors may lead to electrical shock, causing
severe injury or death. DO NOT use these tools
near energized conductors.
CAUTION:
• Wear safety glasses and any other required PPE.
WARNING:
• Pinch points, keep hands and other body parts
away from the crimping head when crimping.
Compression dies at high force can cause severe
personal injury. Failure to observe this warning
could result in severe injury or death.
Summary of Contents for ABB T&B Tools TBM14CR-LI
-
Page 1: Table Of Contents
1 of 5 — O P ER ATING INSTR UC TI O NS Hydraulic compression tool TBM14CR-LI Important Read and understand all instructions and safety information in this manual before operating or servicing this tool. Be aware of proper usage and potential hazards. -
Page 2: General Information
Do not pull cord when disconnecting charger. *ABB Installation Products Inc. and its related companies are not affiliated, associated, authorized, sponsored, endorsed by or in any way officially connected with Makita Corporation or any of its subsidiaries or its affiliates. MAKITA and LXT are trademarks of Makita Corporation. -
Page 3: Part & Accessories
3 of 5 Parts and Accessories: Operating Instructions: • Hydraulic Compression Tool (TBM14CR-LI) Charging the battery 1. Connect the battery charger BAT-MK to 120V AC. Charging Advance trigger Release button light will repeatedly flash green. Slots for 2. Insert the Battery firmly into the charger. The LED Lamp lights Slots for hanging strap hanging strap... -
Page 4: Compression Cycles
4 of 5 Compression cycles Compression operation This guide indicates the number of compression cycles that the 1. Select the appropriate size dies for the connector. TBM14CR-LI can be expected to perform when the battery is fully 2. Insert one die half into the C-head by sliding it in while pulling charged. -
Page 5: Troubleshooting Guide
Any reproduction to purchase orders, the agreed particulars – in whole or in part – is forbidden without Warranty: www-public.tnb.com/warranty/ shall prevail. ABB does not accept any prior written consent of ABB. ta04790-tb2.pdf responsibility whatsoever for potential © 2020 ABB Installation Products Inc. and/ Registration: tnb.abb.com/toolregistration...