Table of Contents
Quick Links
OWNER'S MANUAL
LG LED Signage
(LED SCREEN)
Please read the safety information carefully before using this product.
After reading this manual, keep it in an easily accessible location for future reference.
LSAA012-MX
LSAA012-SX
*MFL71750801*
www.lg.com
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
(2009-REV01)
Table of Contents
Related Manuals for LG LSAA012-MX
Summary of Contents for LG LSAA012-MX
- Page 1 (LED SCREEN) Please read the safety information carefully before using this product. After reading this manual, keep it in an easily accessible location for future reference. LSAA012-MX LSAA012-SX *MFL71750801* www.lg.com Copyright © 2020 LG Electronics Inc. All Rights Reserved. (2009-REV01)
-
Page 2: Table Of Contents
- Handling for Protecting LED Package Screen ................15 - Remove Protective Bracket ........ 18 - Terminal ................. 19 CONNECTING LAN (LSAA012-MX) ......20 CONNECTING AC (LSAA012-MX) ......21 TROUBLESHOOTING ....23 PRODUCT SPECIFICATIONS ... 25 TO SEE THE WEB MANUALS (SOFTWARE USER GUIDE / INSTALLATION MANUAL) .. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS The safety precautions are intended to prevent unexpected danger or harm by helping the user to use the product safely and for its intended purpose. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged. -
Page 4: Precautions For The Ac Cable And Power
Precautions for the AC Cable and Power WARNING • Before using an AC cable, make sure it conforms to the national standards. • Operate the display only from a power source(i.e. voltage) indicated in the product specification. - Otherwise the product can be damaged, fire can occur or you may be electrocuted. If you are not sure what type of power supply you have, consult a certified installation company. - Page 5 • If water or any foreign substance enters the product, disconnect the AC cable immediately and contact the service centre. - Otherwise, this may cause a fire or electric shock due to damage to the product. • Keep the AC cable away from heating devices. - The cord coating may melt and cause fire or electric shock.
-
Page 6: Precautions For Moving The Product
Precautions for Moving the Product WARNING • Contact the service centre before moving the product. - It may cause electric shock and damage the product. • Make sure the product is turned off, unplugged, and all cables have been removed before the product is moved. - You may be electrocuted or the product can be damaged. -
Page 7: Precautions For Installing The Product
Precautions for Installing the Product WARNING • Contact the service centre before installing the product. - It can cause electric shock and damage the product. • Do not drop an object on or impact on the product. Keep out of reach of children and do not place toys or objects near the product to prevent throwing things on the product screen. - Page 8 CAUTION • Install the product where no Electromagnetic Interference occurs. • If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with service engineer before installing. Please do not install the product in places such as where there is an abundance of fine dust or oil mist, chemical substances are used, exposed to direct sunlight, the temperature is very high or low, the humidity is very high.
-
Page 9: Precautions For Cleaning The Product
Precautions for Cleaning the Product WARNING • Keep the product clean at all times. - If you don’t clean the unit for a long time and it becomes covered in dust, it can cause fire or product damage. • When you need to clean the inside of the product, you must contact the service centre. - Otherwise, cleaning without support may cause a fire, electric shock, or damage to the product. -
Page 10: Precautions For Using The Product
Precautions for Using the Product WARNING • Do not use the product in any environment with excessively high temperatures or humidity. • If you use the product for a long period of time, take a rest from time to time to protect your vision. - Extended viewing could result in impaired vision. - Page 11 • Do not use high voltage electrical goods near the product (e.g., a bug zapper). - This may result in product malfunction if it receives an electrical shock. • If there is a gas leak, do not touch the outlet, and open the windows for ventilation. - Otherwise, the product may cause fire or electric shock.
-
Page 12: Product Disposal
Product Disposal • Do not dispose of this product with general household waste. • Disposal of this product must be carried out in accordance to the regulations of your local authority. -
Page 13: Assembling And Preparing
ASSEMBLING AND PREPARING CAUTION • Always use genuine components to ensure safety and durability of the product. • The product warranty will not cover damage or injury caused by the use of unauthorised components. NOTE • The accessories provided with your product may vary depending on the model or region. •... -
Page 14: Essential Accessories
Essential Accessories Essential accessories are subject to change or to be added without prior notices to improve the performance of the product. The images of the product in this manual are to aid comprehension and may differ from the actual appearance. System Controller CSAA-012X NOTE... -
Page 15: Handling For Protecting Led Package Screen
Handling for Protecting LED Package Screen Proper Handling When taking out the product, make sure the screen is not pressed. Protection Pad To stand the product upright, hold it on both sides so that the LED package screen does not touch the floor. LED Package Screen... - Page 16 Place the product with the LED package screen facing down. To protect the screen, lay the protective pad in the box on the floor. LED Package Screen Protection Pad If you do not have a pad, make sure that there is no foreign object on the floor when you lay the product on the floor, and then carefully place the LED package screen facing down or up.
- Page 17 Improper Handling If the product is tilted toward the LED package screen, the bottom of the product may be damaged. LED Package Screen If the product is tilted toward the edge of the LED package screen, the bottom (corner) of the product may be damaged.
-
Page 18: Remove Protective Bracket
Remove Protective Bracket Before installing the product, disassemble the protective brackets attached to each edge. M4 x L8 NOTE • Keep the protective brackets because you need them to move the product again. -
Page 19: Terminal
Terminal : Sends the IR signal to another set. • • : Sends the LAN signal to another set. NOTE • The IR sensor is not provided with this product. • For CSAA-012X, the IR sensor and remote control are provided. •... -
Page 20: Connecting Lan (Lsaa012-Mx)
CONNECTING LAN (LSAA012-MX) You can connect to the CSAA-012X (System Controller) by using an LAN cable. LAN cable (*Not provided) CSAA-012X CAUTION • Check the direction so that the LAN cable is not damaged. • Inserting the LAN cable with excessive force may damage the contact point. -
Page 21: Connecting Ac (Lsaa012-Mx)
CONNECTING AC (LSAA012-MX) You can connect the unit to a power disconnecting device using an AC cable. • Use the AC cable to connect to the power disconnecting device. (Please use a cable that is long enough to be connected to the screen.) •... - Page 22 You can connect the AC cable connected to the power disconnecting device to the screen. Structure Fixing parts 100 mm • Connect the AC cable to the screen using an angle type O-type crimp terminal to connect to the screen power supply. •...
-
Page 23: Troubleshooting
TROUBLESHOOTING No image is displayed. • Is the AC cable connected to the product? - Make sure the AC cable is properly connected to the power disconnecting device. • Is the ‘No Signal’ message displayed? - There is no connection between CSAA-012X, and the input source. Check the connection status of the LAN cable. - Access the Input menu to check the input source. - Page 24 - Refer to the manual of CSAA-012X. NOTE • Without prior notice, the software is subject to change to improve the functionality of the product. • The above items are only applicable to the LSAA012-MX, LSAA012-SX model. Please read “TROUBLESHOOTING” in the manual of CSAA-012X.
-
Page 25: Product Specifications
PRODUCT SPECIFICATIONS Without prior notice, the product specifications are subject to change to enhance the functionality of the product. symbol means alternating current, and the symbol means direct current. LSAA012-MX Pixel pitch (distance between pixels) 1.25 mm Resolution 480 x 270... - Page 26 LSAA012-SX Pixel pitch (distance between pixels) 1.25 mm Resolution 480 x 270 Pixel density 640,000 pixels/m Number of pixels per screen 129,600 pixels Number of colour output bits 48 bit (R: 16 bit, G: 16 bit, B: 16 bit) Number of expressible colours 281.4 x 10 Input/ Output ports Not Applied...
- Page 27 (Unit: mm) 337.5 44.9...
-
Page 28: To See The Web Manuals (Software User Guide / Installation Manual)
TO SEE THE WEB MANUALS (SOFTWARE USER GUIDE / INSTALLATION MANUAL) You can find more information about the LG Digital Signage (Monitor Signage) in the web manuals (Software User Guide / Installation Manual). For more information, visit the LG website at http://partner.lge.com. - Page 32 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL Temporary noise is normal when powering ON or OFF this SERIAL NO.