Honeywell CIU 888 Firmware Upgrade Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Recording Equipment
  5. CIU 888
  6. Firmware upgrade manual

Honeywell CIU 888 Firmware Upgrade Manual

Hide thumbs Also See for CIU 888:
Table of Contents

Quick Links

Firmware Upgrade Manual
Release R140
Table of Contents
loading

Related Manuals for Honeywell CIU 888

Summary of Contents for Honeywell CIU 888

  • Page 1 Firmware Upgrade Manual Release R140...

  • Page 3: Preface

    General The features of the CIU 888 are enabled through the CIU 888 license. This license stipulates that the CIU 888, for example, can be used in a redundant system setup, supports a certain number of tanks, and can be sealed by a legal Weights and Measures authority (e.g. NMi). To expand the initial features of the CIU 888, the CIU 888 needs to be updated with a new license.
  • Page 4 Preface This page is intentionally left blank Firmware Upgrade Manual Part No.: 4417596_Rev11 CIU 888...

  • Page 5: Table Of Contents

    APPENDIX A CIU 888 Model Selection Guide ....... . .A-1...

  • Page 6: Table Of Contents

    Table of Contents This page is intentionally left blank Firmware Upgrade Manual Part No.: 4417596_Rev11 CIU 888...

  • Page 7: Chapter 1 Firmware Upgrades

    Example: If CIU 888 R101.4 needs to be migrated to R120.1, then follow the path: R101.4 -> R101.6 -> R120.1 NOTE: 1. For CIU 888 releases till R101.6, Ensite Pro + Migration Tool needs to be used for configuration. 2. Starting with CIU 888 R103.1, CIU 888 Service Tool R101.1 can be used for configuration.
  • Page 8 Internet Explorer 10 and 11, and Google Chrome (version 66 and later). Refer to sections 1.4.1 or 1.4.2 as applicable in the Configu- ration Manual CIU 888 (Part No. 4417584) for more information. For some upgrades, multiple upgrade steps may be involved, please follow the firmware upgrade paths mentioned in chapter 1.2 "Migration paths".

  • Page 9: Installing A Firmware Upgrade On A Standalone System Setup

    CIU 888: W&M lock key switch (left) and Configuration lock key switch (right) If the W&M lock key switch has been sealed, the hardware seal (wire) must be removed first in order to unlock the key switch. By breaking the hardware seal, the CIU 888 will no longer be W&M approved.
  • Page 10 CIU 888 display: Configuration settings are unlocked 3. On the PC/laptop connected to the CIU 888, launch the browser. 4. Enter the IP address of the CIU 888 in the address bar of the browser. The IP address is 192.168.1.1. Next, press the Enter key.
  • Page 11 The Diagnostics window is displayed by default (see FIGURE 1-6). FIGURE 1-6 CIU 888 Web interface: Diagnostics window 6. From the CIU 888 menu in the CIU 888 Web interface, select Enter Safe Mode (see FIGURE 1-7). FIGURE 1-7 CIU 888 Web interface: Enter Safe Mode 7.
  • Page 12 Firmware Upgrades 8. After restarting CIU 888, perform steps 4 and 5 again to log in CIU888. The CIU 888 Safe Mode Web interface is displayed. (see FIGURE 1-8). FIGURE 1-8 CIU 888 Web interface: Safe Mode 9. From the CIU 888 menu, select Upgrade Firmware. (see FIGURE 1-9).
  • Page 13 "Migration paths" for details on the firmware upgrade paths before proceeding with the firmware upgrade. 10.Insert the USB flash drive with the firmware upgrade in the USB port located at the front of the CIU 888 (see FIGURE 1-11). Next, click Search firmware. FIGURE 1-11 CIU 888: USB port located at the front The USB flash drive will be mounted onto the CIU 888.
  • Page 14 - Launch R140 Migration tool and enter required details and select “Update Configuration”. - For more details refer section 4.4 in the Ensite Pro to CIU 888 Migration Manual (Part No. 118-4417593-D09). b) Click Upload to CIU 888.

  • Page 15: Installing A Firmware Upgrade On A Redundant System Setup

    CIU 888 and the secondary CIU 888. REMARKS: 1. In the following procedure, it is assumed that the primary CIU 888 normally has the active role and the secondary CIU 888 the passive role.
  • Page 16 CIU 888: W&M lock key switch (left) and Configuration lock key switch (right) If the W&M lock key switch has been sealed, the hardware seal (wire) must be removed first in order to unlock the key switch. By breaking the hardware seal, the CIU 888 will no longer be W&M approved.
  • Page 17 Remove the key from the key switch and store it.  On the CIU 888 display, the status of the key switches changes from ‘Locked’ to ‘Unlocked’ (see FIGURE 1-4). FIGURE 1-14 CIU 888 display: Configuration settings are unlocked Part No.: 4417596_Rev11...
  • Page 18 Firmware Upgrades c) Launch the browser. d) Enter the IP address of the CIU 888 in the address bar of the browser. The IP address is 192.168.1.1. Next, press the Enter key. The CIU 888 Login window is displayed (see FIGURE 1-15).
  • Page 19 Firmware Upgrades interface is displayed. The Diagnostics window is displayed by default (see FIGURE 1-16). FIGURE 1-16 CIU 888 Web interface: Diagnostics window Part No.: 4417596_Rev11 Firmware Upgrade Manual CIU 888 1 - 13...
  • Page 20 Firmware Upgrades f) From the CIU 888 menu in the CIU 888 Web interface, select Shutdown CIU (see FIGURE 1-17). The primary CIU 888 shuts down. FIGURE 1-17 CIU 888 Web interface: Shutdown CIU option in CIU 888 menu 3. Install the firmware upgrade on the secondary CIU 888, see section 1.4 for more information.

  • Page 21: Troubleshooting During The Installation Of A Firmware Upgrade

    Firmware Upgrades 10.Verify that the system setup is working properly. Refer to section 2.10 in the Configuration Manual CIU 888 (Part No. 4417593) for more information. 1.6 Troubleshooting during the installation of a firmware upgrade For more information about problems or errors that may be encountered during the installation of a firmware upgrade, refer to the Troubleshooting &...
  • Page 22 Firmware Upgrades Firmware Upgrade Manual Part No.: 4417596_Rev11 1 - 16 CIU 888...

  • Page 23: Chapter 2 License Updates

    Starting from R120.1 release, there is a change in the Signature verification of License files. If CIU 888 is being upgraded from R103.2 or earlier releases to R120.1 or later releases, then the signature file associated with the License file is automatically updated within the CIU 888 box, so no action is explicitly required for CIU 888 license files.

  • Page 24: Updating The Ciu 888 License On A Standalone System Setup

    CIU 888: W&M lock key switch (left) and Configuration lock key switch (right) If the W&M lock key switch has been sealed, the hardware seal (wire) must be removed first in order to unlock the key switch. By breaking the hardware seal, the CIU 888 will no longer be W&M approved.
  • Page 25 CIU 888 display: Configuration settings are unlocked 3. On the PC/laptop connected to the CIU 888, launch the browser. 4. Enter the IP address of the CIU 888 in the address bar of the browser. The IP address is 192.168.1.1. Next, press the Enter key.
  • Page 26 License Updates interface is displayed. The Diagnostics window is displayed by default (see FIGURE 2-5). FIGURE 2-5 CIU 888 Web interface: Diagnostics window Firmware Upgrade Manual Part No.: 4417596_Rev11 2 - 4 CIU 888...
  • Page 27 License Updates 6. Click CONFIGURE in the section menu bar. The Configure window is displayed (see FIGURE 2-6). FIGURE 2-6 CIU 888 Web interface - Configure window Part No.: 4417596_Rev11 Firmware Upgrade Manual CIU 888 2 - 5...
  • Page 28 Site name Displays the name of the site as configured during commis- sioning of the CIU 888. See the CIU 888 Configuration Man- ual (Part No. 4417593) for more information. Software MSG Displays the software license code as defined according to the Model Selection Guide for the CIU 888 (see APPENDIX A).
  • Page 29 The Update License window is displayed (see FIGURE 2-8). FIGURE 2-8 Update License window 10.Select the license file that must be installed on the CIU 888. Click Browse... to browse to the license file on the PC/laptop, and then select the file.

  • Page 30: Updating The Ciu 888 License On A Redundant System Setup

    CIU 888 license must be installed on both the primary CIU 888 and the secondary CIU 888. REMARKS: 1. In the following procedure, it is assumed that the primary CIU 888 normally has the active role and the secondary CIU 888 the passive role.
  • Page 31 CIU 888: W&M lock key switch (left) and Configuration lock key switch (right) If the W&M lock key switch has been sealed, the hardware seal (wire) must be removed first in order to unlock the key switch. By breaking the hardware seal, the CIU 888 will no longer be W&M approved.
  • Page 32 FIGURE 2-12 CIU 888 display: Configuration settings are unlocked c) Launch the browser. d) Enter the IP address of the CIU 888 in the address bar of the browser. The IP address is 192.168.1.1. Next, press the Enter key. The CIU 888 Login window is displayed (see FIGURE 2-13).
  • Page 33 The Diagnostics window is displayed by default (see FIGURE 2-14). FIGURE 2-14 CIU 888 Web interface: Diagnostics window f) From the CIU 888 menu in the CIU 888 Web interface, select Shutdown CIU (see FIGURE 2-15). The primary CIU 888 shuts down. FIGURE 2-15 CIU 888 Web interface: Shutdown CIU option in CIU 888 menu Part No.: 4417596_Rev11...

  • Page 34: Troubleshooting During The Installation Of A New Ciu 888 License

    License Updates 3. Install the new CIU 888 license on the secondary CIU 888. See section 2.3 for more information. NOTE: Perform steps 1 up to and including 13 of the procedure described in section 2.3. After installation of the new CIU 888 license, the secondary CIU 888 needs to be restarted (part of the procedure).

  • Page 35: Appendix A Ciu 888 Model Selection Guide

    CIU 888 hardware configuration is displayed. The code is generated on the basis of the options presented in the table. FIGURE A-1 Example of the Model Selection Guide for the CIU 888 hardware configuration Part No.: 4417596_Rev11 Firmware Upgrade Manual...

  • Page 36: Software

    CIU 888 software functionality is displayed. The code is generated on the basis of the options presented in the table. FIGURE A-2 Example of the Model Selection Guide for the CIU 888 software functionality Firmware Upgrade Manual Part No.: 4417596_Rev11...

  • Page 37: Appendix B List Of Abbreviations

    List of Abbreviations APPENDIX B LIST OF ABBREVIATIONS Abbreviation Meaning Communication Interface Unit Model Selection Guide Nederlands Meetinstituut (Netherlands Measurement Institute) Tank Radar Level Universal Serial Bus W&M Weights and Measures Part No.: 4417596_Rev11 Firmware Upgrade Manual CIU 888 B - 1...
  • Page 38 List of Abbreviations This page is intentionally left blank Firmware Upgrade Manual Part No.: 4417596_Rev11 B - 2 CIU 888...

  • Page 39: Appendix C Miscellaneous

    Cookies and website data. 3. Click Delete. You will see a confirmation at the bottom of the window when the process is complete. 4. Exit/quit all browser windows and re-open the browser. Part No.: 4417596_Rev11 Firmware Upgrade Manual CIU 888 C - 1...
  • Page 40 Miscellaneous This page is intentionally left blank Firmware Upgrade Manual Part No.: 4417596_Rev11 C - 2 CIU 888...
  • Page 41 +1 800 423 9883 or +1 215 641 3610 E-mail: [email protected] Copyright © 2018 - Honeywell All rights reserved. No part of this manual may be reproduced in any form, by print, photoprint, microfilm or any other means without the written permission from Honeywell.
  • Page 42 For More Information To learn more about Honeywell Enraf’s solutions, contact your Honeywell Enraf account manager or visit www.honeywellenraf.com. Americas Asia Pacific Honeywell Enraf Americas, Inc. 2000 Honeywell Pte Ltd. Northfield Ct. Roswell, GA 30076 USA 17 Changi Business Park Central 1...

Table of Contents