Related Manuals for Acer Altos S200F
Summary of Contents for Acer Altos S200F
-
Page 1: Installation Guide
Altos S205F / S200F Tower Kit Installation Guide Issue 1.0 1 May, 2004... - Page 2 No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated. Issue 1.0 Contents •...
-
Page 3: Installation
Altos S205F / S200F Tower Kit Installation Introduction This document defines the installation procedure for converting the Altos S205F / S200F Rack Enclosure storage system to a Tower system. The unpopulated enclosure and tower installation kit are shown in Figure 1. - Page 4 The enclosure must be unpopulated before you begin the tower installation. Please refer to Altos S205F / S200F User’s Manual for details of module removal/replacement procedures. Remove the four bezel screw covers from the front of the enclosure chassis (if fitted).
- Page 5 Secure the rear of the enclosure to the tower foot using: – 2 off M5 x 8 pan head POZI screws with patchlock (refer to Figure 3) Figure 3: Securing the Enclosure to the Foot Altos S205F / S200F Tower Kit Installation Procedure...
- Page 6 Altos S205F / S200F Tower Kit Installation Procedure Slide the tower cover over the enclosure, taking care to align the tabs on the cover with the slots in the foot. Caution Failure to align the tabs on the cover with the slots in the foot during assembly may result in damage to the paintwork on the foot.
- Page 7 Figure 5: Securing the Cover Refit the bezel covers over the four securing screws at the front of the enclosure chassis Refit the modules in the enclosure in accordance with the instructions in Altos S205F / S200F User’s Manual. Altos S205F / S200F Tower Kit Installation Procedure...
- Page 8 Altos S205F / S200F Tower Kit Installation Procedure Figure 6: Populated Tower Installation END OF PROCEDURE...