Page 1
Figure: Cloud Link 4G M1 Modem Overview: The Honeywell CloudLink 4G M1 Modem is a cellular device intended to process serial data originating from any source, including a Honeywell Electronic Volume Corrector or Data Logger. It connects to remote host over Cellular 4G Cat M1 network.
Page 2
Port RS485) SIM Cover Note : Default serial connection (RX, TX) will be RS232 Setting up the CloudLink 4G M1 Modem device Open the SIM cover and insert Connect the antenna Connect to battery power or the SIM card into SIM card holder external power supply Configure port with 9600...
Page 3
Installing CloudLink 4G M1 Modem in MiWireless as example (pivot panel) Install the 4G antenna on the MiWireless Screw the mounting bracket onto the device by tightening the nut Pivot/Sub panel to hold the Modem Remove the existing 3G antenna...
Page 4
Configuring CloudLink 4G M1 Modem using MasterLink desktop App Configuration of CloudLink 4G M1 modem for Continuous Server mode operation (external supply only). Make sure to keep the MiWireless device door open to configure the Cloud Link 4G Modem through Serial.