Yamaha 03D Application Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Music Mixer
  5. 03D
  6. Application manual

Yamaha 03D Application Manual

Yamaha digital recording console applications guide 02r, 03d
Hide thumbs Also See for 03D:
Table of Contents

Quick Links

See also: Owner's Manual
DIGITAL RECORDING CONSOLE
DIGITAL MIXING CONSOLE
Table of Contents
loading

Related Manuals for Yamaha 03D

Summary of Contents for Yamaha 03D

  • Page 1 DIGITAL RECORDING CONSOLE DIGITAL MIXING CONSOLE...

  • Page 2: Table Of Contents

    20. 02R with Pro Tools for Music Recording ....50 21. 02R with Pro Tools for Video Post ....52 Yamaha 02R & 03D Applications Guide...
  • Page 3 23. 03D with DA-38 (Timecode on Tape Track)... . . 64 24. 03D with Akai DR8 ....... . 66 25.
  • Page 4 All other trademarks and registered trademarks are the property of their respective holders. Copyright © 1997 Yamaha Corporation. All rights reserved. No part of this Applications Guide may be reproduced or distributed in any form or by any means without the prior written authorization of Yamaha Corporation.
  • Page 5 Yamaha 02R & 03D Applications Guide...

  • Page 6: Introduction

    The application diagrams show exactly what equipment is needed for each system and how to connect and make the relevant settings. The 02R and 03D feature as the main components throughout the applications, with various equipment by other manufacturers introduced to form complete systems.
  • Page 7 ADAT. The RD-8 can be connected directly to an 02R or 03D with an optional CD8-AT Digital I/O card. The RD-8 features an on-board synchronizer for synchronization to a master recorder via timecode. Timecode offset and MIDI Machine Control are supported.
  • Page 8 DIGITAL RECORDING CONSOLE...

  • Page 10: Part 1: 02R Applications

    48 kHz and Variable mode for 44.1 kHz (using the PITCH DOWN button, set to –146 cents. At which point 44.1 appears on the display). The newer ADAT-XT has dedicated switches for selecting these two sampling rates. 02R Applications ID=1 ID=2 ID=3 02R-B 02R-C 02R-D Yamaha 02R & 03D Applications Guide...
  • Page 11 • The Tascam 25-pin digital audio cables PW-88DL (5 m) and PW-88D (1 m) are available from Tascam. • DA-88 tapes can be duplicated when DA-88s are connected together directly. Be aware that a delay (24 samples) will be introduced if tapes are duplicated via the 02R. Yamaha 02R & 03D Applications Guide...

  • Page 12: 02R Optional Interface Cards

    BUS 1–8, AUX 1–6, Direct OUT of Mic/Line 1–8, STEREO L/R BUS 1–8, AUX 1–6, Direct OUT of Mic/Line 9–16, STEREO L/R BUS 1–8, AUX 1–6, STEREO L/R BUS 1–8, AUX 1–6, STEREO L/R Yamaha 02R & 03D Applications Guide...

  • Page 13: Wordclock Connection And Termination

    In this example, the wordclock master is a digital multitrack recorder. Both 02R wordclock terminator switches are set to ON. This method of wordclock distribution is not recommended for large systems. Yamaha 02R & 03D Applications Guide WORDCLOCK Distribution box...

  • Page 14: Wordclocks

    The four sections of the display, 1 1 1 1 to 4 4 4 4 , are explained below. 1 1 1 1 4 4 4 4 02R Applications 2 2 2 2 3 3 3 3 Yamaha 02R & 03D Applications Guide...
  • Page 15 This input is selected as the wordclock source, a wordclock signal is present, and the 02R is correctly locked to it. Yamaha 02R & 03D Applications Guide This section of the Word Clock Select display indicates the type of interface cards installed in the four slots.
  • Page 16 In this example the internal sampling rate is set to 48 kHz, as shown by the highlighted box. This section of the Word Clock Select display shows the actual wordclock frequency, internal or external, to within one decimal place. Yamaha 02R & 03D Applications Guide...

  • Page 17: With One Adat (Timecode On Tape Track)

    At which point “–146, 44.1, –148” appears on the display). The newer ADAT-XT has dedicated switches for selecting these two sampling rates. Notes • Press the DIGITAL IN button on the ADAT to use the DIGITAL INPUT. Yamaha 02R & 03D Applications Guide...
  • Page 18 Figure 1 02R with One ADAT (Timecode on Tape Track) 02R Applications 13 CD8-AT Interface Card C-R Out DIGITAL RECORDING CONSOLE MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Yamaha 02R & 03D Applications Guide Power Amp DAT Recorder 2TR IN DIGITAL STEREO OUT DIGITAL Headphones...

  • Page 19: With Adat & Jl Cooper Datasync-2

    DIGITAL IN and SET LOCATE buttons together. The internal clock can then be set on the 02R. Notes • Press the DIGITAL IN button on the ADAT to use the DIGITAL INPUT. Yamaha 02R & 03D Applications Guide...
  • Page 20 Figure 2 02R with ADAT & JL Cooper Datasync-2 02R Applications 15 CD8-AT Interface Card C-R Out DIGITAL RECORDING CONSOLE MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Power Amp DAT Recorder 2TR IN DIGITAL STEREO OUT DIGITAL Headphones Yamaha 02R & 03D Applications Guide...

  • Page 21: With Two Adats & Jl Cooper Datasync-2

    • ADAT–B must be powered up before ADAT–A, because when ADAT–A is powered up it checks how many ADATs are connected, allocates them device numbers, and automatically sets the system word clock. ADAT–A works as Control Master. Yamaha 02R & 03D Applications Guide...
  • Page 22 Figure 3 02R with Two ADATs & JL Cooper Datasync-2 02R Applications 17 CD8-AT Interface Cards C-R Out DIGITAL RECORDING CONSOLE MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Yamaha 02R & 03D Applications Guide Power Amp DAT Recorder 2TR IN DIGITAL STEREO OUT DIGITAL Headphones...

  • Page 23: 02R With Adat & Brc

    • On the BRC, set the DIGITAL I/O button to OFF. This function is for direct ping-pong between multiple ADATs. If this is turned ON while connected to an 02R, bus assignments will produce unexpected results. Press the DIGITAL IN button on the ADAT to use the DIGITAL INPUT. Yamaha 02R & 03D Applications Guide...
  • Page 24 Figure 4 02R with ADAT & BRC 02R Applications 19 CD8-AT Interface Card C-R Out DIGITAL RECORDING CONSOLE MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Power Amp DAT Recorder 2TR IN DIGITAL STEREO OUT DIGITAL Headphones Yamaha 02R & 03D Applications Guide...

  • Page 25: 02R With Two Adats & Brc

    • On the BRC, set the DIGITAL I/O button to OFF. This function is for direct ping-pong between multiple ADATs. If this is turned ON while connected to an 02R, bus assignments will produce unexpected results. Press the DIGITAL IN button on the ADAT to use the DIGITAL INPUT. Yamaha 02R & 03D Applications Guide...
  • Page 26 Figure 5 02R with Two ADATs & BRC 02R Applications 21 Power Amp DAT Recorder CD8-AT Interface Cards C-R Out 2TR IN DIGITAL STEREO OUT DIGITAL RECORDING CONSOLE DIGITAL MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Yamaha 02R & 03D Applications Guide Headphones...

  • Page 27: Two 02Rs With Four Adats & Brc

    OUT. On 02R–B it is set to IN. • To generate timecode on the BRC, press the GEN SYNC button. • The optional CD8-CS kit contains two CD8-CS cards and one 25-pin straight cable. Yamaha 02R & 03D Applications Guide...
  • Page 28 Stereo fader, Bus master, & Aux master controls of 02R–B are used. CD8-AT cable Switch=IN CD8-CS 02R–B WORD CLOCK IN (BNC) (75 =ON) Yamaha 02R & 03D Applications Guide SYNC IN SYNC OUT SYNC IN SMPTE TIMECODE INPUT (phono) DIGITAL RECORDING CONSOLE...

  • Page 29: With Two Adats (Timecode On Tape Track)

    • ADAT–B must be powered up before ADAT–A, because when ADAT–A is powered up it checks how many ADATs are connected, allocates them device numbers, and automatically sets the system word clock. ADAT–A works as Control Master. Yamaha 02R & 03D Applications Guide...
  • Page 30 Figure 7 02R with Two ADATs (Timecode on Tape Track) 02R Applications 25 Power Amp DAT Recorder CD8-AT Interface Cards C-R Out 2TR IN DIGITAL STEREO OUT DIGITAL RECORDING CONSOLE DIGITAL MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Yamaha 02R & 03D Applications Guide Headphones...

  • Page 31: R With Adat & Rd-8

    • The ADAT must be powered up before the RD-8, because when the RD-8 is powered up it checks how many ADATs are connected, allocates them device numbers, and automatically sets the system word clock. RD-8 works as Control Master. Yamaha 02R & 03D Applications Guide...
  • Page 32 Figure 8 02R with ADAT & RD-8 02R Applications 27 Power Amp DAT Recorder CD8-AT Interface Cards C-R Out 2TR IN DIGITAL STEREO OUT DIGITAL RECORDING CONSOLE DIGITAL MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Yamaha 02R & 03D Applications Guide Headphones...

  • Page 33: R With One Da-88

    This switch is for use with Tascam High-Bit recording applications. • Tascam 25-pin digital audio cables PW-88DL (5 m) and PW-88D (1 m) are available from Tascam. Yamaha 02R & 03D Applications Guide...
  • Page 34 Figure 9 02R with One DA-88 02R Applications 29 CD8-TD Interface Card C-R Out DIGITAL RECORDING CONSOLE MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Power Amp DAT Recorder 2TR IN DIGITAL STEREO OUT DIGITAL Headphones Yamaha 02R & 03D Applications Guide...

  • Page 35: R With Two Da-88S

    This switch is for use with Tascam High-Bit recording applications. • Tascam 25-pin digital audio cables PW-88DL (5 m) and PW-88D (1 m), and the 15-pin PW-88S sync cable are available from Tascam. Yamaha 02R & 03D Applications Guide...
  • Page 36 Optional SY-88 Sync Board installed Rear panel DIP switches 2 and 5=O CD8-TD Interface Cards C-R Out DIGITAL RECORDING CONSOLE MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Yamaha 02R & 03D Applications Guide Power Amp DAT Recorder 2TR IN DIGITAL STEREO OUT DIGITAL Headphones...

  • Page 37: R With Four Da-88S

    This switch is for use with Tascam High-Bit recording applications. • Tascam 25-pin digital audio cables PW-88DL (5 m) and PW-88D (1 m), and the 15-pin PW-88S sync cable are available from Tascam. Yamaha 02R & 03D Applications Guide...
  • Page 38 Optional SY-88 Sync Board installed Rear panel DIP switches 2 and 5=O Power Amp DAT Recorder CD8-TD Interface Cards C-R Out 2TR IN DIGITAL STEREO OUT DIGITAL RECORDING CONSOLE DIGITAL MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Yamaha 02R & 03D Applications Guide Headphones...

  • Page 39: Two 02Rs With Four Da-88S

    2 and 5 to ON (O). Set internal switch 8 on the SY-88 board marked S2 to ON. • To use the MTC function, the SY-88 firmware must be version 3.08 or higher. Yamaha 02R & 03D Applications Guide...
  • Page 40 CD8-TD cable Switch=IN CD8-CS 02R–B WORD CLOCK IN (BNC) (75 =ON) Yamaha 02R & 03D Applications Guide SYNC IN SYNC OUT PW-88S 15-pin cable SYNC IN SYNC OUT SMPTE TIMECODE INPUT (phono) DIGITAL RECORDING CONSOLE Stereo fader, Bus master, &...

  • Page 41: R With Akai Dr8 Hard Disk Recorder

    To prevent this, in the Digi submenu set Auto Sync to Off. Note that the Auto Sync setting is not memorized when the DR8 is turned off, although it can be stored as part of a project. Yamaha 02R & 03D Applications Guide...
  • Page 42 Figure 13 02R with Akai DR8 Hard Disk Recorder 02R Applications 37 CD8-AT Interface Card C-R Out DIGITAL RECORDING CONSOLE MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Yamaha 02R & 03D Applications Guide Power Amp DAT Recorder 2TR IN DIGITAL STEREO OUT DIGITAL Headphones...

  • Page 43: R With Akai Dr16 Hard Disk Recorder

    To prevent this, in the Digi submenu set Auto Sync to Off. Note that the Auto Sync setting is not memorized when the DR16 is turned off, although it can be stored as part of a project. Yamaha 02R & 03D Applications Guide...
  • Page 44 Figure 14 02R with Akai DR16 Hard Disk Recorder C-R Out DIGITAL RECORDING CONSOLE MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard 02R Applications 39 Power Amp DAT Recorder 2TR IN DIGITAL STEREO OUT DIGITAL Headphones Yamaha 02R & 03D Applications Guide...

  • Page 45: R With Analog 16-Track Multitrack Recorder

    • The AD/DA (CD8-AD) cards are Double size cards and take up two slots. So with AD/DA cards in slots [1] and [2], slots [3] and [4] cannot be used for other cards. Yamaha 02R & 03D Applications Guide...
  • Page 46 Figure 15 02R with Analog 16-Track Multitrack Recorder 02R Applications 41 Power Amp DAT Recorder CD8-AD Interface Cards (+4dB/–10dB switchable) C-R Out 2TR IN DIGITAL STEREO OUT DIGITAL RECORDING CONSOLE DIGITAL MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Yamaha 02R & 03D Applications Guide Headphones...

  • Page 47: R With Video Machine, Adat, & Brc

    • On the BRC, set the DIGITAL I/O button to OFF. This function is for direct ping-pong between multiple ADATs. If this is turned ON while connected to an 02R, bus assignments will produce unexpected results. Press the DIGITAL IN button on the ADAT to use the DIGITAL INPUT. Yamaha 02R & 03D Applications Guide...
  • Page 48 SMPTE Start Offset=as required Press GEN SYNC to output SMPTE timecode or MTC DIGITAL OUTPUT DIGITAL INPUT CD8-AT Interface Card C-R Out Yamaha 02R & 03D Applications Guide Power Amp DAT Recorder 2TR IN DIGITAL STEREO OUT DIGITAL RECORDING CONSOLE DIGITAL Headphones...

  • Page 49: R With Video Machine, Adat, & Ai-2

    The AI-2 works as wordclock master and the ADAT locks to it automatically via the 9-pin sync cable. The AI-2 sampling rate should be set to match that of the ADAT tape. Notes • On the AI-2, set the ONLINE Key for chasing. Yamaha 02R & 03D Applications Guide...
  • Page 50 TC=as required SMPTE Start Offset=as required Sampling rate=same as Adat tape DIGITAL OUTPUT DIGITAL INPUT CD8-AT Interface Card C-R Out Yamaha 02R & 03D Applications Guide Power Amp DAT Recorder 2TR IN DIGITAL STEREO OUT DIGITAL RECORDING CONSOLE DIGITAL Headphones...

  • Page 51: R With Video Machine & Da-88

    This switch is for use with Tascam High-Bit recording applications. • Tascam 25-pin digital audio cables PW-88DL (5 m) and PW-88D (1 m) are available from Tascam. Yamaha 02R & 03D Applications Guide...
  • Page 52 Figure 18 02R with Video Machine & DA-88 02R Applications 47 DA-88 Settings: Time Mode=SMPTE/EBU (as tape) TV Monitor Chase=ON Clock=VIDEO Power Amp DAT Recorder CD8-TD Interface Card C-R Out 2TR IN DIGITAL STEREO OUT DIGITAL RECORDING CONSOLE DIGITAL Yamaha 02R & 03D Applications Guide Headphones...

  • Page 53: R With Two Fostex D-90S

    • D-90–B is connected to Slot [2] of the 02R and the tape inputs correspond to tracks nine through sixteen. 02R Wordclock Setup The 02R works as wordclock master. D-90 Wordclock Setup Each D-90 should be configured as a wordclock slave, with the ADAT interface as the source. Yamaha 02R & 03D Applications Guide...
  • Page 54 Figure 19 02R with Two Fostex D-90s 02R Applications 49 Power Amp DAT Recorder CD8-AT Interface Cards C-R Out 2TR IN DIGITAL STEREO OUT DIGITAL RECORDING CONSOLE DIGITAL MIC/LINE Inputs 1–24 MIDI Sampler MIDI keyboard Yamaha 02R & 03D Applications Guide Headphones...

  • Page 55: R With Pro Tools For Music Recording

    Pro Tools Wordclock Setup The Pro Tools system should be configured as wordclock master. Note • The D-sub <–> XLR box (or D-sub to XLR break-out cable) is not available from Yamaha, and should be custom made. Yamaha 02R & 03D Applications Guide...
  • Page 56 Figure 20 02R with Pro Tools for Music Recording 02R Applications 51 Macintosh computer with Pro Tools audio card Power Amp DAT Recorder C-R Out 2TR IN DIGITAL STEREO OUT DIGITAL RECORDING CONSOLE DIGITAL Headphones MIDI Sampler MIDI keyboard Yamaha 02R & 03D Applications Guide...

  • Page 57: R With Pro Tools For Video Post

    The Pro Tools system should be configured as wordclock master. Notes • The D-sub <–> XLR break-out cable is not available from Yamaha, and should be custom made. • The slave clock (Super Clock) signal connected between Digidesign products is an exclusive clock, with a sampling rate of Fs x 256.
  • Page 58 888 I/O Audio Interface 888 I/O Audio Interface D-sub<–>XLR break-out cables CD8-AE-S CD8-AE-S Interface Interface Card MIDI IN (75 = ON) Yamaha 02R & 03D Applications Guide Macintosh computer with Pro Tools audio card 50-pin Pro Tools cable Card DIGITAL RECORDING CONSOLE...
  • Page 59 54 02R Applications Yamaha 02R & 03D Applications Guide...
  • Page 60 DIGITAL MIXING CONSOLE...

  • Page 62: Part 2: 03D Applications

    Part 2: 03D Applications System Operating Notes • 03D interface cards must be screwed securely in place. Do not leave the screws out after installation as the cards will not be grounded correctly. • If a crackling noise can be heard, make sure not more than one device is set to internal wordclock.

  • Page 63: 03D Optional Interface Cards

    Kit includes two cards and one cable. YGDAI Digital Inputs The eight YGDAI digital inputs of the interface card work as 03D inputs for input channels 17 through 24, and cannot be reconfigured. Assigning Signals to the YGDAI Outputs The following table shows which signal sources can be assigned to the eight YGDAI digital outputs.

  • Page 64: Wordclock Connections & Termination

    For correct operation it is essential that the wordclock cabling be terminated correctly. The 03D has a wordclock termination ON/OFF (75 ) switch on the rear panel. Wordclock is a TTL signal, and IN and OUT connections use BNC connectors. Three wordclock distribution examples are shown below.

  • Page 65: Wordclocks

    With the 03D’s internal wordclock generator, industry-standard sampling rates of 44.1 kHz and 48 kHz are available. When the internal wordclock generator is used, the 03D can be used as wordclock master, with other digital devices working as wordclock slaves.
  • Page 66 CAUTION preference is set to ON, a warning message appears. No wordclock signal available. FS —When the 03D is locked to a wordclock, the sampling rate appears here (48k, 44.1k, or 32k). When it is unlocked, the display shows UNLOCK. If another page is accessed in the unlocked state, UNLOCK appears on that page too.

  • Page 67: D With Adat & Jl Cooper Datasync-2

    • 9-pin Sync cables for connecting the ADAT and Datasync-2 are available from Alesis. 03D Wordclock Setup In this system, the 03D works as a wordclock slave. Any pair of YGDAI digital inputs can be selected as the wordclock source. Use the [DIO] button to locate the D.in Setup page for wordclock settings.
  • Page 68 EQ LOW MIDI OUT EQ LIBRARY AUX 1 Effects processor FADER METER AUX OUT ST IN TO HOST Figure 22 03D with ADAT & JL Cooper Datasync-2 03D Applications 63 CD8-AT Interface Card MONITOR ST IN 26dB 26dB 26dB 26dB...

  • Page 69: D With Da-38 (Timecode On Tape Track)

    Syncman Plus. 03D Wordclock Setup The 03D works as a wordclock slave. Any pair of YGDAI digital inputs can be selected as the wordclock source. Use the [DIO] button to locate the D.in Setup page for wordclock settings.
  • Page 70 Syncman Plus MIDI MIDI MIDI IN MMC-38 alternative sync connection Effects processor AUX OUT ST IN TO HOST Figure 23 03D with DA-38 (Timecode on Tape Track) 03D Applications 65 TDIF-1 Digital I/O CD8-TD Interface Card MONITOR 26dB 26dB 26dB...

  • Page 71: D With Akai Dr8

    • The Digital In/Out connectors on the 03D and DR8 are connected together using Optical Cables. 03D Wordclock Setup The 03D works as a wordclock slave. Any pair of YGDAI digital inputs can be selected as the wordclock source. Use the [DIO] button to locate the D.in Setup page for wordclock settings.
  • Page 72 FADER MODE AUX 1 AUX 2 Effects processor FADER METER MIXING LAYER 17–24/MASTER AUX OUT ST IN TO HOST Figure 24 03D with Akai DR8 03D Applications 67 CD8-AT Interface Card MONITOR PHONES ST IN MONITOR 26dB 26dB 26dB 26dB...

  • Page 73: D With Akai Dr16

    • The Digital In/Out connectors on the 03D and DR16 are connected together using Optical Cables. 03D Wordclock Setup The 03D works as a wordclock slave. Any pair of YGDAI digital inputs can be selected as the wordclock source. Use the [DIO] button to locate the D.in Setup page for wordclock settings.
  • Page 74 EQ LIBRARY FADER MODE AUX 1 AUX 2 Effects processor FADER METER MIXING LAYER 17–24/MASTER AUX OUT ST IN TO HOST Figure 25 03D with Akai DR16 03D Applications 69 DIGITAL OUTPUT DIGITAL INPUT CD8-AT MONITOR PHONES ST IN MONITOR 26dB...

  • Page 75: D With Fostex D-90

    • The Digital In/Out connectors on the 03D and D-90 are connected together using Optical Cables. 03D Wordclock Setup The 03D works as wordclock master, and can be set to either 44.1 kHz or 48 kHz on the D.in Setup page, which is accessed using the [DIO] button. D-90 Wordclock Setup The D-90 should be configured as a wordclock slave, with the ADAT interface as the clock...
  • Page 76 FADER MODE AUX 1 AUX 2 Effects processor FADER METER MIXING LAYER 17–24/MASTER AUX OUT ST IN TO HOST Figure 26 03D with Fostex D-90 03D Applications 71 CD8-AT Interface Card MONITOR ST IN MONITOR 26dB 26dB 26dB 26dB 26dB...

  • Page 77: D With Syncman Plus & Analog Multitrack

    • The seven tape returns are connected to 03D channel inputs 9 through 16. 03D Wordclock Setup The 03D works as wordclock master, and can be set to either 44.1 kHz or 48 kHz on the D.in Setup page, which is accessed using the [DIO] button.
  • Page 78 EQ LIBRARY FADER MODE AUX 1 Effects processor FADER METER MIXING LAYER AUX OUT ST IN TO HOST Figure 27 03D with Syncman Plus & Analog Multitrack 03D Applications 73 SMPTE (phone) Midiman Syncman Plus MONITOR MIDI IN ST IN MONITOR...

  • Page 79: D With Video Machine & Da-88

    • The video house sync is connected to the Video In BNC connection on the DA-88. 03D Wordclock Setup The 03D works as a wordclock slave. Any pair of YGDAI digital inputs can be selected as the wordclock source. Use the [DIO] button to locate the D.in Setup page for wordclock settings.
  • Page 80 –34 SCENE MEMORY CHANNEL CONTROL DELAY/Ø EQ LOW EQ LIBRARY AUX 1 FADER METER Figure 28 03D with Video Machine & DA-88 03D Applications 75 DA-88 Settings: Time Mode=SMPTE/EBU (as tape) TV Monitor Chase=ON Clock=VIDEO CD8-TD Interface Card MONITOR DIGITAL...

  • Page 81: D With Pro Tools

    76 03D Applications 03D with Pro Tools This application shows how the 03D can be used with a Pro Tools system. The eight digital tape returns and 18 Mic/Line inputs provide up to 26 inputs at mixdown. In addition, the 03D’s built-in automix and scene memory systems provide both dynamic and static mix...
  • Page 82 EFFECT 2 METER MIXING LAYER 1–16 17–24/MASTER Effects processor AUX OUT ST IN D-sub<–>XLR break-out cable Figure 29 03D with Pro Tools 03D Applications 77 Macintosh computer with Pro Tools audio card Power Amp DAT Recorder MONITOR DIGITAL PHONES STEREO...

  • Page 83: D Basic Midi Studio

    78 03D Applications 03D Basic MIDI Studio This application shows how the 03D can be used in conjunction with a MIDI sequencer to form a powerful MIDI studio. The 03D’s 18 inputs are used to connect MIDI tone generators, synthesizers, samplers, etc. In addition, the 03D’s built-in automix and scene memory systems provide both dynamic and static mix automation and can be referenced to either MIDI timecode or MIDI Clock.
  • Page 84 EFFECT 1 EFFECT 2 FADER STATUS METER MIXING LAYER FADER 1–8 1–16 17–24/MASTER MIC/LINE Inputs 1–16 MIDI keyboard Figure 30 03D Basic MIDI Studio 03D Applications 79 Power Amp DAT Recorder MONITOR DIGITAL PHONES STEREO ST IN MONITOR PHONES 26dB...

  • Page 85: D Installation

    Two internal effects, EQ and dynamics processors on every input and output, a compact size, and total recall make the 03D ideal for live and installation applications. Four bus outputs and the stereo output provide up to six outputs, and bus outputs can be delayed individually to compensate for delays in multiple speaker systems.
  • Page 86 10 and 20 milliseconds to the rear speakers gives the impression that the presenter is actually located in front, not behind (Hass Effect). Each 03D output can be delayed by up to 40 milliseconds.
  • Page 87 Hass Effect, which was introduced on the previous page). The difference with using pan is that sounds are localized using actual level changes. The 03D has a unique surround pan function built-in and can be automated referenced to external MIDI Timecode.
  • Page 88 Using the stereo output to feed the main speakers and the bus outputs in combination with the built-in effects processors to feed effects speakers, reverberation can be used to simulate different environments. The 03D has two independent multi-effects processors, each with 64 preset programs.
  • Page 89 YAMAHA CORPORATION P.O.Box 1, Hamamatsu, Japan Yamaha PA Web Site–http://www.yamaha.co.jp/product/proaudio/homeenglish/ PAO 043 97 11 12 IP Printed in Japan...

This manual is also suitable for:

02rO3d

Table of Contents