Siemens SINUMERIK 840D sl System Manual

Siemens SINUMERIK 840D sl System Manual

Smart machine tool operation
Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Quick Links

SINUMERIK
SINUMERIK 840D sl
Smart machine tool operation
System Manual
Valid for
Control
SINUMERIK 840D sl
CNC software
Version 4.8 SP2
12/2017
6FC5397-7FP40-0BA0
Preface
Fundamental safety
instructions
Modern machine operation
Multitouch operation with
SINUMERIK Operate
SINUMERIK Operate
expansion using a sidescreen
Machine OEM-specific HMI
using SINUMERIK Integrate
Create MyHMI / WinCC
Appendix A
1
2
3
4
5
A
Table of Contents
loading

Summary of Contents for Siemens SINUMERIK 840D sl

  • Page 1 Preface Fundamental safety instructions Modern machine operation SINUMERIK Multitouch operation with SINUMERIK Operate SINUMERIK 840D sl Smart machine tool operation SINUMERIK Operate expansion using a sidescreen Machine OEM-specific HMI using SINUMERIK Integrate System Manual Create MyHMI / WinCC Appendix A...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
  • Page 3: Preface

    Siemens' content, and adapt it for your own machine documentation. Training At the following address (http://www.siemens.com/sitrain), you can find information about SITRAIN (Siemens training on products, systems and solutions for automation and drives). FAQs You can find Frequently Asked Questions in the Service&Support pages under Product Support (https://support.industry.siemens.com/cs/de/en/ps/faq).
  • Page 4 Technical Support Country-specific telephone numbers for technical support are provided in the Internet at the following address (https://support.industry.siemens.com/sc/ww/en/sc/2090) in the "Contact" area. Smart machine tool operation System Manual, 12/2017, 6FC5397-7FP40-0BA0...
  • Page 5: Table Of Contents

    Table of contents Preface.................................3 Fundamental safety instructions........................7 General safety instructions.......................7 Warranty and liability for application examples................7 Industrial security........................8 Modern machine operation...........................9 Introduction..........................9 Content of the "Smart machine tool operation" manual............10 Multitouch operation with SINUMERIK Operate..................11 Overview..........................11 User interface.........................12 3.2.1 Screen layout.........................12 3.2.2 Operator controls on the "SINUMERIK Operate Generation 2"...
  • Page 6 Example 1 - Integration of SINUMERIK Operate into a WinCC interface with navigation keys............................37 5.4.2 Example 2 - Integration of SINUMERIK Operate into a WinCC interface with PDF Viewer..38 Appendix A..............................39 Prerequisites..........................39 Documentation overview SINUMERIK 840D sl..............41 Index................................43 Smart machine tool operation System Manual, 12/2017, 6FC5397-7FP40-0BA0...
  • Page 7: Fundamental Safety Instructions

    Fundamental safety instructions General safety instructions WARNING Danger to life if the safety instructions and residual risks are not observed If the safety instructions and residual risks in the associated hardware documentation are not observed, accidents involving severe injuries or death can occur. ●...
  • Page 8: Industrial Security

    Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends to apply product updates as soon as available and to always use the latest product versions. Use of product versions that are no longer supported, and failure to apply latest updates may increase customer’s exposure to cyber threats.
  • Page 9: Modern Machine Operation

    CNC in their working environment. SmartOperation - intelligent CNC operation SmartOperation for the SINUMERIK 840D sl is the response to the requests for easy and intuitive operation, flexibility and individualization in the display, and control of the machines.
  • Page 10: Content Of The "Smart Machine Tool Operation" Manual

    Modern machine operation 2.2 Content of the "Smart machine tool operation" manual Content of the "Smart machine tool operation" manual This manual provides information about the following topics: ● SINUMERIK Operate with "SINUMERIK Operate Generation 2" user interface User-friendly multitouch operation –...
  • Page 11: Multitouch Operation With Sinumerik Operate

    Further information on the subject of "user interface" is available in the following literature: ● SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual (https:// support.industry.siemens.com/cs/document/109752360) ● SINUMERIK Integrate Run MyScreens (BE2) / SINUMERIK 840D sl Programming Manual (https://support.industry.siemens.com/cs/document/109752511) ● SINUMERIK 840D sl Easy XML / SINUMERIK 840D sl Programming Manual (https:// support.industry.siemens.com/cs/document/109752366)
  • Page 12: User Interface

    Multitouch operation with SINUMERIK Operate 3.2 User interface User interface 3.2.1 Screen layout Touch and gesture operator controls for SINUMERIK Operate with the "SINUMERIK Operate Generation 2" user interface. ① Changing the channel ② Cancel alarms ③ Function key block ④...
  • Page 13: Further Operator Touch Controls

    Multitouch operation with SINUMERIK Operate 3.2 User interface Operator control Function Undo Multiple changes are undone one by one. As soon as a change has been completed in an input field, this function is no longer available. Restoring Multiple changes are restored one by one. As soon as a change has been completed in an input field, this function is no longer available.
  • Page 14: Virtual Keyboard

    Multitouch operation with SINUMERIK Operate 3.3 Operating with finger gestures 3.2.2.3 Virtual keyboard If you have called the virtual keyboard using the function key block, then you have the option of adapting the key assignment using the switchover keys. ① Shift key for uppercase and lowercase letters ②...
  • Page 15: Finger Gestures For Multi-Touch Operation

    Multitouch operation with SINUMERIK Operate 3.3 Operating with finger gestures ● Camapur Comfort type 619 ● Comasec PU (4342) 3.3.2 Finger gestures for multi-touch operation ● Select window ● Select object (e.g. NC set) ● Activate entry field – Enter or overwrite value –...
  • Page 16 Multitouch operation with SINUMERIK Operate 3.3 Operating with finger gestures Flick horizontally with one finger ● Scroll in lists with many columns Spread ● Zoom in to graphic contents (e.g. simulation, mold making view) Pinch ● Zoom out from graphic contents (e.g. simulation, mold making view) Pan with one finger ●...
  • Page 17 Multitouch operation with SINUMERIK Operate 3.3 Operating with finger gestures Tap and hold using 2 fingers ● Open cycles line by line to change (without input screen form) Tap with two index fingers ● Tap with two fingers simultaneously in the lower right and left-hand corners of the panel to open the TCU menu.
  • Page 18 Multitouch operation with SINUMERIK Operate 3.3 Operating with finger gestures Smart machine tool operation System Manual, 12/2017, 6FC5397-7FP40-0BA0...
  • Page 19: Sinumerik Operate Expansion Using A Sidescreen

    ● Licenses for SINUMERIK Operate with sidescreen (Page 39) References For information on activating the sidescreen and to configure the virtual keys, refer to the following literature: ● SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual (https:// support.industry.siemens.com/cs/document/109752360) Sidescreen with standard windows...
  • Page 20 SINUMERIK Operate expansion using a sidescreen 4.2 Sidescreen with standard windows This navigation bar can be used to switch directly to the desired operating area, and to show and hide the sidescreen. Navigation bar Operator control Function Opens the "Machinery" operating area. Opens the tool list in the "Parameter"...
  • Page 21: Operation In The Sidescreen

    SINUMERIK Operate expansion using a sidescreen 4.3 Operation in the sidescreen Operator control Function Hides the sidescreen. Shows the sidescreen. Operation in the sidescreen Open sidescreen ● Tap the arrow on the navigation bar to show the sidescreen. The standard widgets are displayed in minimized form as the header line. ①...
  • Page 22: Standard Widgets

    SINUMERIK Operate expansion using a sidescreen 4.4 Standard widgets Standard widgets 4.4.1 "Alarms" widget The widget contains all the messages and alarms in the alarm list. The alarm number and description are displayed for every alarm. An acknowledgment symbol indicates how the alarm is acknowledged or canceled. Vertical scrolling is possible if multiple alarms are pending.
  • Page 23: Service Life" Widget

    SINUMERIK Operate expansion using a sidescreen 4.4 Standard widgets 4.4.4 "Service life" widget The widget displays the tool monitoring in relation to the following values: ● Operating time of tool (standard time monitoring) ● Finished workpieces (quantity monitoring) ● Tool wear (wear monitoring) Note Multiple cutting edges If a tool has multiple cutting edges, the values of the edge with the lowest residual service life,...
  • Page 24: Zero Point" Widget

    SINUMERIK Operate expansion using a sidescreen 4.5 Sidescreen with pages for the ABC keyboard and/or machine control panel 4.4.6 "Zero point" widget The widget includes values of the active work offset for all configured axes. The approximate and detailed offset, as well as rotation, scaling and mirroring are displayed for each axis.
  • Page 25: Example 1: Abc Keyboard In The Sidescreen

    SINUMERIK Operate expansion using a sidescreen 4.6 Example 1: ABC keyboard in the sidescreen Example 1: ABC keyboard in the sidescreen ① ABC keyboard ② Key to display the keyboard Smart machine tool operation System Manual, 12/2017, 6FC5397-7FP40-0BA0...
  • Page 26: Example 2: Machine Control Panel In The Sidescreen

    SINUMERIK Operate expansion using a sidescreen 4.8 SINUMERIK Operate Display Manager Example 2: Machine control panel in the sidescreen ① Machine control panel ② Key to display the machine control panel SINUMERIK Operate Display Manager 4.8.1 Overview With a panel with full HD resolution (1920x1080), you have the possibility to work with the Display Manager.
  • Page 27: Screen Layout

    ● SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual (https:// support.industry.siemens.com/cs/document/109752360) For further information on Full HD Panels, please refer to: ● Operator panel fronts manual: TOP 1500, TOP 1900, TOP 2200 / SINUMERIK 840D sl (https://support.industry.siemens.com/cs/document/109752353) 4.8.2 Screen layout The standard supply of a SINUMERIK Operate Display Manager offers the option of choosing between 3-display areas and 4-display areas.
  • Page 28: Operator Controls

    SINUMERIK Operate expansion using a sidescreen 4.8 SINUMERIK Operate Display Manager 4.8.3 Operator controls The Display Manager is enabled. Operator control Function Menu Tap on the menu to select the desired arrangement of the display areas. 3 display areas ● SINUMERIK Operate (with function block) ●...
  • Page 29 SINUMERIK Operate expansion using a sidescreen 4.8 SINUMERIK Operate Display Manager Operator control Function Virtual keyboard Displays a QWERTY keyboard in the display area for applications as well as in the 4th display area below SINUMERIK Operate. If the virtual keyboard is selected while the maximum representation of the display area is active, the keyboard opens as a pop-up.
  • Page 30 SINUMERIK Operate expansion using a sidescreen 4.8 SINUMERIK Operate Display Manager Smart machine tool operation System Manual, 12/2017, 6FC5397-7FP40-0BA0...
  • Page 31: Machine Oem-Specific Hmi Using Sinumerik Integrate Create Myhmi / Wincc

    Machine OEM-specific HMI using SINUMERIK Integrate Create MyHMI / WinCC Overview The integration of SINUMERIK Operate in a WinCC interface combines the advantages SINUMERIK Operate with the capabilities of the WinCC runtime: ● Intuitive CNC operation with SINUMERIK Operate ● The user interface can be easily individualized with SINUMERIK Integrate Create MyHMI / WinCC and SIMATIC WinCC Advanced.
  • Page 32: Wincc - The Easy And Flexible Way To Create Machine Oem-Specific Operating Concepts

    For information on configuration please refer to the following literature: ● SINUMERIK Integrate Create MyHMI /WinCC V15 Configuration Manual (https:// support.industry.siemens.com/cs/document/109752377) ● SIMATIC WinCC Advanced V15 System Manual (https://support.industry.siemens.com) ● SIMATIC WinCC Advanced V15 System Manual – programming reference (https:// support.industry.siemens.com) WinCC –...
  • Page 33 Machine OEM-specific HMI using SINUMERIK Integrate Create MyHMI / WinCC 5.2 WinCC – the easy and flexible way to create machine OEM-specific operating concepts Another advantage is the interaction with STEP7 in the TIA Portal that, for example, makes multiple inputs unnecessary and guarantees consistent data management. WinCC (TIA Portal) facilitates easier, more efficient configuration: ●...
  • Page 34: Creating Machine Oem-Specific Operating Concepts

    Machine OEM-specific HMI using SINUMERIK Integrate Create MyHMI / WinCC 5.3 Creating machine OEM-specific operating concepts Creating machine OEM-specific operating concepts ① SINUMERIK Operate ② Virtual keyboard ③ Virtual machine control panel ④ Tab to switch over between views Integrating SINUMERIK Operate in the user interface Integrating SINUMERIK Operate provides some decisive advantages when implementing an efficient operating concept: ●...
  • Page 35 This achieves a reduction in the number of conventional machine control panels and a more flexible design. Accessing SINUMERIK 840D sl data Connecting WinCC to SINUMERIK 840D sl allows access to PLC and NC data. ● Access to NC variables, GUD variables, machine and setting data ● NC alarms, DB2 alarms ●...
  • Page 36 Scripts allow you to individually design objects. Additional information is provided in the SIMATIC WinCC Advanced V15 System Manual – programming reference (https://support.industry.siemens.com). SIMATIC SmartServer and SmartClient concept A smart client in the WinCC user interface of the machine tool allows a connection to be established to a PC/office PC that can be remotely accessed.
  • Page 37: Examples Of The Design For Oem-Specific Operating Concepts

    Machine OEM-specific HMI using SINUMERIK Integrate Create MyHMI / WinCC 5.4 Examples of the design for OEM-specific operating concepts. Creation of your own tools (controls) You have the option of developing your own controls, which then allow you to further individualize your operating concept.
  • Page 38: Example 2 - Integration Of Sinumerik Operate Into A Wincc Interface With Pdf Viewer

    Machine OEM-specific HMI using SINUMERIK Integrate Create MyHMI / WinCC 5.4 Examples of the design for OEM-specific operating concepts. 5.4.2 Example 2 - Integration of SINUMERIK Operate into a WinCC interface with PDF Viewer This example demonstrates electronic production by directly accessing machine documentation.
  • Page 39: Prerequisites

    SINUMERIK INTEGRATE Create MyHMI /WinCC V15 SINUMERIK INTEGRATE Create 6FC5861-3YC45-0YA0 WinCC expansion for SINUMERIK 840D sl on DVD*; incl. MyHMI /WinCC V15 single license Runtime options for a basic application running on a Simatic IPC** SINUMERIK Operate /PCU (from 6FC5800-….-.YB0...
  • Page 40 For further information, refer to the SINUMERIK Create MyHMI /WinCC V15 (https:// support.industry.siemens.com) sales and delivery release. References You can find additional information in the following reference: ● PCU Base Software (IM10) / SINUMERIK 840D sl Commissioning Manual (https:// support.industry.siemens.com/cs/document/109752527) Smart machine tool operation System Manual, 12/2017, 6FC5397-7FP40-0BA0...
  • Page 41: Documentation Overview Sinumerik 840D Sl

    Appendix A A.2 Documentation overview SINUMERIK 840D sl Documentation overview SINUMERIK 840D sl Smart machine tool operation System Manual, 12/2017, 6FC5397-7FP40-0BA0...
  • Page 42 Appendix A A.2 Documentation overview SINUMERIK 840D sl Smart machine tool operation System Manual, 12/2017, 6FC5397-7FP40-0BA0...
  • Page 43: Index

    Index " "SINUMERIK Operate Generation 2" user interface Machine control panel Function key block, 12 in the sidescreen, 24 Touch operator controls, 13 Multitouch panels "SINUMERIK Operate Generation 2" user Widescreen format, 19 interface, 11 Virtual keyboard, 14 Navigation bar, 19, 20 ABC keyboard, 24 Pages, 19 Camera image...
  • Page 44 Index Touch operator controls Cancel alarms, 13 Changing the channel, 13 Virtual keyboard "SINUMERIK Operate Generation 2" user interface, 14 Virtual keys ABC keyboard, 19 MCP keys, 19 Web connection Digital documents, 35 Widgets, 19 WinCC connection, 35 Smart machine tool operation System Manual, 12/2017, 6FC5397-7FP40-0BA0...

Table of Contents