Fujitsu FI-800R Consumable Replacement And Cleaning Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Scanner
  5. FI-800R
  6. Consumable replacement and cleaning manual

Fujitsu FI-800R Consumable Replacement And Cleaning Manual

Image scanner
Hide thumbs Also See for FI-800R:
Table of Contents

Quick Links

FUJITSU Image Scanner
fi-800R
Consumable Replacement and Cleaning Guide
CG00002-302301 Revision A
Table of Contents
loading

Related Manuals for Fujitsu FI-800R

Summary of Contents for Fujitsu FI-800R

  • Page 1 FUJITSU Image Scanner fi-800R Consumable Replacement and Cleaning Guide CG00002-302301 Revision A...

  • Page 2: Daily Care

    Daily Care This section describes how to clean the scanner. ● Do not use aerosol spray or spray that contains alcohol. Paper dust blown CAUTION up by strong air from the spray may enter inside the scanner, which may cause the scanner to fail or malfunction. Also note that sparks generated by static electricity may cause a fire.

  • Page 3: Location And Frequency

    Location and Frequency Cleaning Location Frequency Pad unit Pick roller Glass Inside of the scanner Ultrasonic sensor Every 1,000 sheets (ADF) Document sensor Feed roller Eject roller Clean when dust and dirt Outside of the scanner Scanner are noticeable. The inside of the scanner (ADF) needs to be cleaned regularly for every certain number of sheets scanned.

  • Page 4: Cleaning The Outside Of The Scanner

    Cleaning the Outside of the Scanner The scanner including the ADF paper chute (feeder) and the stacker should be cleaned with either a piece of dry cloth, a cloth moistened with Cleaner F1/mild detergent, or a sheet of Cleaning Wipe. ...

  • Page 5: Cleaning The Inside Of The Scanner (Adf) With Cleaning Paper

    Cleaning the Inside of the Scanner (ADF) with Cleaning Paper The inside of the ADF can be cleaned with a sheet of Cleaning Paper moistened with Cleaner F1. As the scanner continues to feed the documents, paper dust will accumulate inside the ADF and it may cause scanning errors.
  • Page 6 o For the ADF paper chute (feeder) Open the ADF paper chute (feeder), load the Cleaning Paper, and move the side guides so that there is no space between the side guides and the Cleaning Paper. Otherwise, the Cleaning Paper may be fed skewed. 4.

  • Page 7: Cleaning The Inside Of The Scanner (Adf) With A Cloth

    Cleaning the Inside of the Scanner (ADF) with a Cloth The inside of the ADF can be cleaned with a piece of cloth moistened with Cleaner F1, or a sheet of Cleaning Wipe . As the scanner continues to feed the documents, paper dust will accumulate inside the ADF and it may cause scanning errors.
  • Page 8 1. Turn off the scanner, unplug the power cable and wait for at least 15 minutes. 2. Open the ADF paper chute (feeder). When the ADF is open, it might close accidentally. Be careful not to get your fingers caught. 3.
  • Page 9 o Pick Roller 1 Gently wipe dirt and dust off the roller as you rotate the roller manually, taking care not to damage the roller surface. Make sure that it is wiped properly because black residue on the roller will affect the feeding performance. o Ultrasonic Sensor (x2) / Document Sensor (x4) Gently wipe dirt and dust off the surface of the ultrasonic and document sensors.
  • Page 10 c. Press the [Scan/Stop] button for 3 seconds or more in order for the scanner to enter cleaning mode. d. Press the [Scan/Stop] button. The feed/eject rollers rotate a certain amount simultaneously. As a guideline, pressing the [Scan/Stop] button seven times will rotate the feed rollers/eject rollers one revolution.
  • Page 11 Cleaning the Carrier Sheet/Photo Carrier Sheet/Booklet Carrier Sheet The Carrier Sheet/Photo Carrier Sheet/Booklet Carrier Sheet should be cleaned with either a piece of dry cloth, a cloth moistened with Cleaner F1/mild detergent, or a sheet of Cleaning Wipe. Gently wipe dirt and dust off the surface and the inside of the Carrier Sheet/Photo Carrier Sheet/Booklet Carrier Sheet.

  • Page 12: Consumable Replacement

    Consumable Replacement Replacing the Consumables This section explains how to replace the consumables for the scanner. Consumable Replacement Cycles Consumables need to be replaced periodically. It is recommended that you keep a stock of new consumables and replace them before it reaches the end of the consumable life. Also, the scanner records the number of sheets scanned for each consumable (pad unit and pick roller), which allows you to determine when to replace the consumables.
  • Page 13 Note that the suggested replacement cycles are guidelines for using A4 (80 g/m2 [20 lb]) wood-free or wood-containing paper, as these cycles vary depending on the type of documents scanned and how often the scanner is used and cleaned. For information on purchasing the consumables, contact the distributor/dealer where you purchased this product.
  • Page 14 4. Remove the pad unit. Squeeze both ends of the pad unit (gray parts) and pull it out in the direction of the arrow. 5. Attach a new pad unit Attach the pad unit so that the protrusions are placed as shown below...

  • Page 15: Replacing The Pick Roller

    6. Close the ADF. 7. Plug in the power cable and turn on the scanner. 8. Clear the pad unit counter Start up the Software Operation Panel and clear the counter. Replacing the Pick Roller Replace the pick roller in following procedure. 1.
  • Page 16 4. Open the sheet guide. 5. Remove the pick roller. Pull out the pick roller from the shaft, and then lift up the pick roller to remove it.
  • Page 17 6. Attach a new pick roller. Attach the pick roller to the shaft while aligning the slot of the pick roller with the protrusion of the shaft.
  • Page 18 7. Close the sheet guide. Make sure that both ends of the sheet guide are locked firmly. 8. Close the ADF. 9. Plug in the power cable and turn on the scanner. 10. Clear the pick roller counter. Start up the Software Operation Panel and clear the counter.

Table of Contents