Page 1
• Socket for commissioning and service tool, diagnostic plug or service terminal The RXZ90.1 is used for wireless reception of the room temperature (from the QAX90.1) and the room temperature setpoint (from the QAX91.1), and for transmission of this information to a room controller. Wireless range indoors: approx. 30m.
Type RXZ90.1 Compatibility The RXZ90.1 receiver, in conjunction with wireless sensors, is suitable for use with all devices with a PPS2 room unit interface (e.g. the DESIGO RX, DESIGO PX). The interface may be changed to PPS by means of address plugs.
N.B.: The plant documentation must contain a note to this effect! Note! The device is NOT equipped with address plugs. The address is 1. STOP 3 / 10 Siemens RXZ90.1 – Receiver with PPS2 interface CA2N1644en_05 Building Technologies 02.08.2010...
PLEASE FOLLOW THE INSTRUCTIONS EXACTLY IN THE SEQUENCE SHOWN: Snap-mount the RXZ90.1 receiver on the mounting plate (power ON: the receiver goes into "Installation" mode). Insert batteries in all the allocated wireless room units (max. 5) or remove the isolating strip from the batteries already inserted.
Page 5
"Normal mode" with an empty device list. To re-commission it, shortly bring the receiver off-load. Then follow the procedure under Establishing communication for the first time. 5 / 10 Siemens RXZ90.1 – Receiver with PPS2 interface CA2N1644en_05 Building Technologies 02.08.2010...
Different ways of setting Connecting the receiver to the power supply (power ON) when the device list is the receiver to installa- empty (snap-mount RXZ90.1 receiver on mounting plate) • tion mode Connecting the controller to the power supply, when the receiver is connected to the controller and its device list is empty •...
5 room units in device list Sustained pressure >5s Deletes the device list from the recei- ver and then brings it to the "Normal mode" with an empty device list. 7 / 10 Siemens RXZ90.1 – Receiver with PPS2 interface CA2N1644en_05 Building Technologies 02.08.2010...
Page 8
See “Dimensions” Colour Front plate NCS S 0502-G ≈ RAL 9003 signal white Housing base and mounting plate RAL 7035 light grey Weight Excluding packaging 0.13 kg 8 / 10 Siemens RXZ90.1 – Receiver with PPS2 interface CA2N1644en_05 Building Technologies 02.08.2010...
N1 RXC… room controller A Connection for RXT10.1 commissioning and service tool B Connection for RXT20.1 service terminal with PPS2 interface C Connection for diagnostic plug 9 / 10 Siemens RXZ90.1 – Receiver with PPS2 interface CA2N1644en_05 Building Technologies 02.08.2010...
Page 10
Dimensions 00496 2000 - 2010 Siemens Switzerland Ltd Subject to change 10 / 10 Siemens RXZ90.1 – Receiver with PPS2 interface CA2N1644en_05 Building Technologies 02.08.2010...