Fujitsu LifeBook P1610 Technical Procedure
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. P1610 - LifeBook - Core Solo 1.2 GHz
  6. Technical procedure
Fujitsu LifeBook P1610 Technical Procedure

Fujitsu LifeBook P1610 Technical Procedure

Io board and modem replacement
Hide thumbs Also See for LifeBook P1610:
1
2
3
4
5
6
7

Quick Links

LifeBook P1610
IO Board and Modem
ESD Precautions are required when working on this LifeBook computer.
Make sure the LifeBook is turned off before beginning this procedure.
1. Turn the LifeBook over and
remove the battery
3. Release the cable by flipping the
latch up.
Replacement
2. Extract these 3 screws from the
Hard Disk Drive cover and lift it off.
4. Lift the Drive out.
loading

Related Manuals for Fujitsu LifeBook P1610

Summary of Contents for Fujitsu LifeBook P1610

  • Page 1 LifeBook P1610 IO Board and Modem Replacement ESD Precautions are required when working on this LifeBook computer. Make sure the LifeBook is turned off before beginning this procedure. 1. Turn the LifeBook over and 2. Extract these 3 screws from the remove the battery Hard Disk Drive cover and lift it off.
  • Page 2 5. Extract 11 screws from the lower 6. Extract 2 screws from the rear of case. the LifeBook. 7. Open the LifeBook and lay it flat. 8. Use a plastic pry tool to remove the keyboard upper trim. 9. Lift the top edge of the keyboard 10.
  • Page 3 13. Turn the Display back and lay it 14. Disconnect 2 Display cables from down. the system board and the 2 antenna cables from the WLAN Card. 15. Extract 2 screws from the Display 16. Lift the Display off the lower hinge.
  • Page 4 21. Disconnect the IO Board ribbon 22. Extract 4 screws from the IO cable and the Bluetooth antenna Board and lift it and the RJ11 cable. -2762_close connector out of the lower case. 23. Turn the IO Board over, extract 2 24.
  • Page 5 29. Close the external VGA 30. Extract 3 screws from the PCB. connector cover and secure the upper case with 4 screws. 31. Secure the display with 2 screws 32. Attach the 2 display cables to in the hinge. the system board and the 2 antenna Cables to the WLAN card.
  • Page 6 37. Turn the keyboard over and slide 38. Press the keyboard upper trim it into place into place. 39. Close the LifeBook and turn it 40. Insert 2 screws into the rear of over. the LifeBook. 41. Insert 11 screws into the lower 42.
  • Page 7 45. Replace the battery.