– Training program information including the Siemens intranet link – A complete list of all available DMS8000 documents – Instructions for how to obtain a document via the Siemens intranet using the STEP Documentation Repository System – A map of relevant documents for each target audience group –...
Page 5
Liability disclaimer for damage or injuries Before products are delivered, they are tested to ensure they function correctly when used properly. Siemens disclaims all liability for damage or injuries caused by the incorrect application of the instructions, or the disregard of danger adviso- ries.
Introduction 1 Introduction This is a guide to the software configuration procedures for the Geutebrück MultiS- cope Digital Video Recorder (DVR) in the MM8000 Management Station and MK8000 OPC server. For a complete guide to the configuration process, this manual should be used with the DMS8000 Network, Fire and Intrusion Guide, and with the Installation, Configu- ration and Commissioning manual (ICC) of the specific product.
Configuring CCTV network 3 Configuring CCTV network Video integration The DMS8000 systems MM8000 and MK8000 can support the connection to Geutebrück MultiScope Digital Video Recorder (DVR) in the following way: Integration of video network, made up of the following devices: Manufact.
Configuring CCTV network Fig 2 New tab added by the VNM in the MM8000 project 3.2.1 Video Drivers The VNM can support the drivers required to handle the network communication with: Geutebrück MultiScope (OPC driver) Depending on the specific configuration required, add one or both drivers to your project.
Page 9
Configuring CCTV network Fig 4 CCTV components menu Select this icon to add a Camera folder Select this icon to add a Monitor folder Select this icon to add a TELSCAN Video Web Server Select this icon to add a SISTORE AX Digital Video Recorder (DVR) Select this icon to add a SISTORE MX and MX Pro Digital Video Recorder (DVR) Select this icon to add a SISTORE CX and SX Digital Video Recorder (DVR) Select this icon to add a SIMATRIX switching crossbar...
Configuring CCTV network Geutebrück MultiScope (MSC) DVR configuration The Geutebrück MultiScope (MSC) is a family of Digital Video Recorders capable of acquiring the video signals from 4, 8, 16 or 32 cameras, showing the images on a local monitor, and storing them in digital form on local hard disks. –...
Configuring CCTV network 3.4.2 Configuration procedure The following are the configuration procedures for a MultiScope unit: Adding the required Composer Plug-ins 1. Start the Subsystem Plug-in Installer, in the Windows Start menu, launch the program: Start Programs DMS8000 Tools Subsystem Plug-in Installer The Installer tool starts up and shows a dual-pane window.
Page 12
Configuring CCTV network Adding the Video Network Manager 1. Open the Composer project. 2. If not already done, add the Video Network Manager: see 3.2 at p.5 and the MultiScope driver: see 3.2.1 at p.6. Adding the folder for the MultiScope system ...
Configuring CCTV network Fig 6 MultiScope DVR settings Connecting the cameras 1. Select and expand the MultiScope node. 2. Select and expand the MultiScope Video-in folder. 3. Select and expand the Video Camera folder. 4. Select the video-out node of the camera. 5.
Page 14
Siemens Switzerland Ltd Building Technologies Group International Headquarters Fire Safety & Security Products Gubelstrasse 22 CH-6301 Zug Tel +41 41 724 24 24 Fax +41 41 724 35 22 www.sbt.siemens.com Document no. A6V10067796_a_en DMS8000 Technical Material Edition 06.2009 Section 4...