Quick Links
th
One Blue Hill Plaza, 16
Floor, PO Box 1546
Pearl River, NY 10965
1-800-PC-AMERICA, 1-800-722-6374
(Voice) 845-920-0800 (Fax) 845-920-0880
Pioneer StealthTOM-M5 Installation
and Configuration in Windows XP
This document provides step-by-step instructions for setting up your Pioneer StealthTOM-M5
touchscreen in Windows XP.
1 |
P a g e
Related Manuals for Pioneer StealthTOM-M5
Summary of Contents for Pioneer StealthTOM-M5
- Page 1 Floor, PO Box 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Voice) 845-920-0800 (Fax) 845-920-0880 Pioneer StealthTOM-M5 Installation and Configuration in Windows XP This document provides step-by-step instructions for setting up your Pioneer StealthTOM-M5 touchscreen in Windows XP. P a g e...
- Page 2 Table of Contents Hardware Breakdown Touchscreen Driver Installation Calibrating the Touchscreen Monitor P a g e...
- Page 3 Hardware Breakdown Connect the video cable to the computer (either the DVI or the VGA connection). Connect the audio out cable, from the computer to the Audio IN port on the touchscreen. The Audio Out port and Power out cable is for an additional sound bar. ...
- Page 4 Touchscreen Driver Installation The driver for the touchscreen monitor can be downloaded from: http://download2.pcamerica.com/drivers/Manufacturer/PioneerPOS/StealthTOM-M5.zip 1. Run the extracted Setup.exe file. 2. If prompted select Run to begin the installation. 3. Select Next. P a g e...
- Page 5 4. Select Next. 5. Select Install RS232 interface driver. 6. Select Next. P a g e...
- Page 6 7. Select Next system boot up. 8. Select Next. 9. Select OK. 10. If you are using multiple monitors, select Support Multi-Monitor System. 11. Select Next. P a g e...
- Page 7 12. Select Next. 13. Select Next. P a g e...
- Page 8 14. Select Next. 15. After the restart you should be presented with the screen to calibrate the monitor. Touch the center of each target to calibrate the monitor. If you do not then please see the next section. P a g e...
- Page 9 Calibrating the Touchscreen Monitor 1. Select the icon at the bottom right of the monitor (this will be located next to the date time on the taskbar). 2. Select the Tools tab, then select 4 Points Calibration. 3. You should be presented with the screen to calibrate the monitor.